The rapid development of on-surface synthesis provides a unique approach toward the formation of carbon-based nanostructures with designed properties. Herein, we present the on-surface formation of CN-substituted phenylene vinylene chains on the Au(111) surface, thermally induced by annealing the substrate stepwise at temperatures between 220 degrees C and 240 degrees C. The reaction is investigated by scanning tunneling microscopy and density functional theory. Supported by the calculated reaction pathway, we assign the observed chain formation to a Knoevenagel condensation between an aldehyde and a methylene nitrile substituent.

AbstractDespite the recent progress in the synthesis of crystalline boronate ester covalent organic frameworks (BECOFs) in powder and thin‐film through solvothermal method and on‐solid‐surface synthesis, respectively, their applications in electronics, remain less explored due to the challenges in thin‐film processability and device integration associated with the control of film thickness, layer orientation, stability and crystallinity. Moreover, although the crystalline domain sizes of the powder samples can reach micrometer scale (up to ≈1.5 μm), the reported thin‐film samples have so far rather small crystalline domains up to 100 nm. Here we demonstrate a general and efficient synthesis of crystalline two‐dimensional (2D) BECOF films composed of porphyrin macrocycles and phenyl or naphthyl linkers (named as 2D BECOF‐PP or 2D BECOF‐PN) by employing a surfactant‐monolayer‐assisted interfacial synthesis (SMAIS) on the water surface. The achieved 2D BECOF‐PP is featured as free‐standing thin film with large single‐crystalline domains up to ≈60 μm2 and tunable thickness from 6 to 16 nm. A hybrid memory device composed of 2D BECOF‐PP film on silicon nanowire‐based field‐effect transistor is demonstrated as a bio‐inspired system to mimic neuronal synapses, displaying a learning–erasing–forgetting memory process.

Covalent organic frameworks (COFs) have garnered immense scientific interest among porous materials because of their structural tunability and diverse properties. However, the response of such materials toward laser-induced nonlinear optical (NLO) applications is hardly understood and demands prompt attention. Three novel regioregular porphyrin (Por)-based porous COFs-Por-COF-HH and its dual metalated congeners Por-COF-ZnCu and Por-COF-ZnNi-have been prepared and present excellent NLO properties. Notably, intensity-dependent NLO switching behavior was observed for these Por-COFs, which is highly desirable for optical switching and optical limiting devices. Moreover, the efficient π-conjugation and charge-transfer transition in ZnCu-Por-COF enabled a high nonlinear absorption coefficient (β=4470 cm/GW) and figure of merit (FOM=σ1 /σo , 3565) value compared to other state-of-the-art materials, including molecular porphyrins (β≈100-400 cm/GW), metal-organic frameworks (MOFs; β≈0.3-0.5 cm/GW), and graphene (β=900 cm/GW).

Organic electrode materials are of long‐standing interest for next‐generation sustainable lithium‐ion batteries (LIBs). As a promising cathode candidate, imide compounds have attracted extensive attention due to their low cost, high theoretical capacity, high working voltage, and fast redox reaction. However, the redox active site utilization of imide electrodes remains challenging for them to fulfill their potential applications. Herein, the synthesis of a highly stable, crystalline 2D polyarylimide (2D‐PAI) integrated with carbon nanotube (CNT) is demonstrated for the use as cathode material in LIBs. The synthesized polyarylimide hybrid (2D‐PAI@CNT) is featured with abundant π‐conjugated redox‐active naphthalene diimide units, a robust cyclic imide linkage, high surface area, and well‐defined accessible pores, which render the efficient utilization of redox active sites (82.9%), excellent structural stability, and fast ion diffusion. As a consequence, high rate capability and ultrastable cycle stability (100% capacity retention after 8000 cycles) are achieved in the 2D‐PAI@CNT cathode, which far exceeds the state‐of‐the‐art polyimide electrodes. This work may inspire the development of novel organic electrodes for sustainable and durable rechargeable batteries.

Cyano-substituted polyphenylene vinylenes (PPVs) have been the focus of research for several decades owing to their interesting optoelectronic properties and potential applications in organic electronics. With the advent of organic two-dimensional (2D) crystals, the question arose as to how the chemical and optoelectronic advantages of PPVs evolve in 2D compared with their linear counterparts. In this work, we present the efficient synthesis of two novel 2D fully sp2 -carbon-linked crystalline PPVs and investigate the essentiality of inorganic bases for their catalytic formation. Notably, among all bases screened, cesium carbonate (Cs2 CO3 ) plays a crucial role and enables reversibility in the first step with subsequent structure locking by formation of a C=C double bond to maintain crystallinity, which is supported by density functional theory (DFT) calculations. A quantifiable energy diagram of a "quasi-reversible reaction" is proposed, which allows the identification of further suitable C-C bond formation reactions for 2D polymerizations. Moreover, the narrowing of the HOMO-LUMO gap is delineated by expanding the conjugation into two dimensions. To enable environmentally benign processing, the post-modification of 2D PPVs is further performed, which renders stable dispersions in the aqueous phase.

Porous organic polymers (POPs) have attracted significant attention towards molecular adsorption in recent years due to their high porosity, diverse functionality and excellent chemical stability. In this work, we present a systematic case study on the formation of thiazolo[5,4-d]thiazole (TzTz) linkages through model compounds and its integration to synthesize a set of three novel, thermo-chemically stable TzTz-linked POPs, namely TzTz-POP-3, TzTz-POP-4, and TzTz-POP-5 with triphenylbenzene, tetraphenylpyrene and tetra(hydroxyphenyl)methane cores, respectively. Interestingly, the integrated TzTz moiety of the represented TzTz-POP-3 renders chemoselective removal of organic dye fluorescein (FL) from a mixture with parafuchsine (FU) in aqueous solution. The TzTz-POP-3 offered excellent chemoselectivity of ≈1:7 (FL:FU), compared to alike porous materials demonstrated for similar applications due to the presence of multiple active anchoring sites coupled with permanent porosity and appropriate pore window.

The interest in (micro)porous systems is greater than ever before with microporous polymers finding application in areas such as gas storage/separation and catalysis. In contrast to the vast majority of publications on microporous polymers seeking ever higher values for surface area or uptake capacity for a particular gas, this work presents a means to render a microporous system responsive to electromagnetic stimuli. The incorporation of a diarylethene (DAE) derivative in the backbone of a polymer of intrinsic microporosity (PIM) produces a microporous system that exhibits photochromism as proven by UV-vis absorption and NMR studies. In the resulting DAE-PIM, surface area is not a fixed unalterable property but can be influenced by the external and nondestructive stimulus light in a reversible manner. Furthermore, in combination with Matrimid, free-standing membranes can be produced that display light-switchable diffusivity and permeability for carbon dioxide and oxygen. In this way, material scientists are offered the potential to employ only one system that can assume several states with different properties for each.

Covalent attachment of a microporous polymer network (MPN) on a gold surface is presented. A functional bromophenyl-based self-assembled monolayer (SAM) formed on the gold surface acts as co-monomer in the polymerisation of the MPN yielding homogeneous and robust coatings. Covalent binding of the films to the electrode is confirmed by SEIRAS measurements.