To determine the intrinsic effects of body elements on the electrochemiluminescence (ECL) of metal nanoclusters (NCs), herein, a valence-state engineering strategy is developed to adjust the NCs' ECL with bovine serum albumin (BSA)-stabilized AuNCs as a model, in which engineering the valence state of the Au body element, i.e., Au(0) and Au(I), is performed via successively reducing the precursor AuCl4- to Au(I) and Au(0) with BSA. The obtained BSA-AuNCs/N2H4 system leads to three anodic ECL processes at 0.37 (ECL-1), 0.85 (ECL-2), and 1.45 V (ECL-3). ECL-1 is generated from the BSA-Au(0) section of BSA-AuNCs in a surface-defect-involved route and is much stronger and red-shifted compared to ECL-2 and ECL-3, which are generated from the BSA-Au(I) section of BSA-AuNCs in the band-gap-engineered route. Each of the anodic ECL processes can be selectively generated and/or suppressed via adjusting the Au(I)/Au(0) ratio of BSA-AuNCs, tunable ECL generation route, and triggering potential, and the emission intensity and waveband of metal NCs are conveniently achieved in body-element-involved valence-state engineering.

A single-stabilizer-capped strategy is proposed for achieving highly efficient and surface-defect-involved electrochemiluminescence (ECL) from unary copper nanoclusters (NCs) via employing l-cysteine (Cys) as a capping agent of luminophore. The Cys-capped CuNCs (Cys-CuNCs) can be electrochemically injected with valence band (VB) holes and exhibit eye-touchable ECL processes around +0.95 and +1.15 V upon employing TPrA as a coreactant. Both accumulated ECL spectra and spooling ECL spectra demonstrated that the two ECL processes are of the same single waveband and spectrally identical to each other with the same maximum emission wavelength of 640 nm. Promisingly, ECL of the Cys-CuNCs/TPrA system is obviously red-shifted for ∼150 nm to PL of Cys-CuNCs, indicating that the bandgap-engineered routes for ECLs of Cys-CuNCs are completely blocked. The oxidative-reduction ECL process of the Cys-CuNCs/TPrA system is a kind of highly efficient, eye-visible, and single-color emission in surface-defect-involved route. The capping agent of Cys can enable the CuNCs/TPrA system with a stronger ECL than other thiol capping agents, so that Cys-CuNCs are utilized as ECL tags for sensitive and selective immunoassays, which exhibit a wide linear response range from 0.05 pg/mL to 0.5 ng/mL and a limit of detection of 0.01 pg/mL (S/N = 3) with carcinoembryonic antigen as the analyte. Moreover, both the luminophore Cys-CuNCs and conjugates Ab2-CuNCs can be safely stored in aqueous media without any protector, which is promising for the evolution and clinic application of metal NC ECL in the surface-defect-involved route.

Mechanoluminescent (ML) materials with highly-efficient and multicolored emission are strongly anticipated in the field of stress sensing and information encryption.

Single-color electrochemiluminescence (ECL) of nanoparticles is normally achieved in a bandgap engineered route via passivating the nanoparticle surface. Herein, when linear mercaptoalkanoic acids are employed as the thiol-capping agent of unary Au nanoclusters (NCs), a single-stabilizer-capped strategy is proposed to achieve surface defect-involved and single-color ECL from the AuNCs with hydrazine (N2H4) as the coreactant. The carbon skeleton of the linear mercaptoalkanoic acids exhibits important effects on the ECL of the AuNCs, and efficient oxidative-reductive ECL is achieved with 8-mercaptooctanoic acid (MOA), 11-mercaptoundecanoic acid (MUA), and 12-mercaptododecanoic acid (MDA) capped AuNCs, respectively. The ECL of these AuNCs not only exhibits similar ECL intensity-potential profiles with the same maximum emission potential of ∼1.20 V (vs Ag/AgCl), but also demonstrates almost identical spectral ECL profiles of the same maximum emission wavelength around 713 nm as well as the same fwhm of 64 nm. The ECL of AuNCs/N2H4 is obviously red-shifted to the photoluminescence of AuNCs, which not only provides unambiguous evidence that bandgap-engineered ECL of these AuNCs is quenched but also manifests that the capping agent of linear mercaptoalkanoic acid is promising for the achievement of surface defect-involved and single-color ECL from AuNCs. The MUA capped AuNCs can be utilized as an ECL tag for a sensitive and selective immunoassay, which exhibits a broad linear range from 0.5 mU/mL to 1 U/mL with a low limit of detection of 0.1 mU/mL (S/N = 3) with CA125 as the model analyte. This work provides a promising alternative to the traditional surface-passivating strategy for the achievement of single-color ECL from nanoparticle luminophores.

Singlet oxygen (1O2) is an important reactive oxygen species (ROS) that is intensively involved in natural photochemical and photobiological processes. Herein, selectively lighting up 1O2 is achieved in the aggregation-induced emission (AIE) of electrochemiluminescence (ECL) from the Zn2+-mediated AIE assembly of Au nanoclusters (Zn2+-AIE-AuNCs). Zn2+-AIE-AuNCs can exhibit efficient AIE ECL and photoluminescence (PL) along with 1O2 generation in energy and charge transfer routes, respectively. The AIE ECL of the Zn2+-AIE-AuNCs/tripropylamine (TEA) system in carbonate buffer is located around 703 nm with the dimeric aggregate of 1O2 as an emitter because electrochemically oxidizing coexisted Zn2+-AIE-AuNCs and TEA in carbonate buffer would promote the oxygen vacancy (Ov) of Zn2+-AIE-AuNCs, which could selectively enable the generation of emissive singlet oxygen in the energy transfer route by effectively transferring the energy from excited singlet Zn2+-AIE-AuNCs to the triplet ground state of dissolved oxygen (3O2). No emissive 1O2 is detected via electrochemically oxidizing the Zn2+-AIE-AuNCs in the case without either carbonate buffer or TEA, and the Zn2+-AIE-AuNCs/TEA system can only exhibit AIE ECL around 485 nm with Zn2+-AIE-AuNCs as the emitter in carbonate-free buffers. Photoexciting Zn2+-AIE-AuNCs merely brings out band-gap-engineered AIE PL around ∼485 nm with Zn2+-AIE-AuNCs as the emitter, which manifests that the 1O2 generated in the charge transfer route via photoexciting Zn2+-AIE-AuNCs is un-emissive. This work not only proposes an effective strategy for AIE with 1O2 as an emitter but also opens a promising way to selectively light up 1O2.

The photoluminescence, electroluminescence, and electrochemiluminescence from nanocrystals (NCs) have been extensively exploited for both fundamental and applied investigation over two decades, while the understanding of chemiluminescence (CL) from NCs is still far from clear by now. Herein, a general route for triggering CL from NC luminophore is proposed by extensively exploiting the charge transfer between n-type NCs and oxidants. Oxidants, such as K2S2O8, H2O2, KMnO4, and NaClO, can chemically inject the hole onto the valence band (VB) of methionine-capped n-type AuNCs (Met@AuNCs) and enable the occurrence of efficient radiative-charge-recombination between the chemically injected exogenous VB hole and the pre-existed endogenous conduction band (CB) electron, which eventually results in single-color and defect-involved CL with the maximum emission wavelength around 824 nm. The CL of Met@AuNCs/oxidant is qualified for ultrasensitive CL immunoassay in a similar procedure to the biotin-avidin and magnetic separation involved commercial CL immunoassay and exhibits acceptable performance for linearly determining carcinoembryonic antigen from 50 pg/mL to 100 ng/mL with a limit of detection of 10 pg/mL (S/N = 3). This strategy provides a general route to develop nanoparticulate CL luminophores and might eventually enable CL multiplexing assay via extensively exploiting the CL of different wavebands.

Mechanoluminescence (ML) is one kind of mechanical-tooptical energy conversion, and a strategy toward achieving bright elastic ML emission is strongly anticipated for ML application. Herein, a ternary-host strategy is proposed for synthesizing heterojunction ML materials with eyevisible elastic ML under an ultralow pressure of 2 N, in which ZnS, CaCO3, and SrCO3 are employed as precursors to prepare the ternary-host (Ca0.5Sr0.5)ZnOS/xZnS. Upon partially substituting the precursor ZnS with MnCO3, the Mn2+ activator could introduce luminescent centers and carrier traps into the ternary-host (Ca0.3Sr0.5)ZnOS/xZnS and enable achieving a series of (Ca0.5Sr0.5)ZnOS/xZnS/Mn2+ phosphors with bright and pressure-sensitive elastic ML. The (Ca0.5Sr0.5)ZnOS/xZnS/Mn2+ phosphors not only exhibit eyevisible red ML under ambient conditions without any preirradiation but can also display a linearly enhanced ML intensity along with the enlarged external force at a 2 N interval as well as regeneratable ML upon repetitively applying an external force 20 times. The maximum emission wavelength of ML can be conveniently modulated from 623 to 658 nm by adjusting the ZnS content of (Ca0.5Sr0.5)ZnOS/xZnS/Mn2+ phosphors.

All commercial chemiluminescence (CL) assays are conducted with either glow or flash CL of eye-visible waveband from chemical luminophores. Herein, glow and flash, as well as waveband adjustable CL from the same nanoparticle luminophore of thiol-capped CuInS2@ZnS nanocrystals (CIS@ZnS-Thiol), are proposed via extensively exploiting the differed redox nature of CL triggering reagents. Taking thiosalicylic acid (TSA) as the model thiol-capping agent, the electron-injection-initiated charge transfer between CIS@ZnS-TSA and reductant can bring out efficient glow CL while the hole-injection-initiated charge transfer between CIS@ZnS-TSA and oxidant can give off obvious flash CL under optimum conditions. The maximum emission wavelength for CL of CIS@ZnS-TSA is adjustable from 730 nm to 823 nm via employing different triggering agents. Promisingly, the coexistent reductant of N2H4·H2O and oxidant of H2O2 can be employed as dual triggering reagents to trigger eye-visible and highly efficient flash CL from CIS@ZnS-TSA. The maximum emission intensity for flash CL of CIS@ZnS-TSA/N2H4-H2O2 is 101-fold greater than the glow CL of CIS@ZnS-TSA/N2H4 and 22-fold greater than the flash CL of CIS@ZnS-TSA/H2O2, respectively. The flash CL from CIS@ZnS-TSA/N2H4-H2O2 is qualified for highly sensitive and selective CL immunoassay in a commercialized typical procedure with the entire operating process manually terminated within 35 min.

Herein, low-triggering-potential (LTP) electrochemiluminescence (ECL) with an onset around 0.0 V (vs Ag/AgCl) is proposed with bovine serum albumin (BSA)-stabilized Au nanocrystals (BSA-AuNCs) as a luminophore and hydrazine hydrate (N2H4) as a coreactant. The BSA-AuNCs/N2H4 system can exhibit efficient LTP-ECL around 0.37 V with the luminophore of both monodispersed and surface-confined states. The LTP-ECL of BSA-AuNCs/N2H4 is a kind of single-color emission with a maximum emission wavelength around 740 nm, which is obviously red-shifted for 80 nm from that of BSA-AuNCs PL, and indicates that the ECL is generated in a surface-defect-involved route instead of the band-gap-engineered route. Importantly, BSA-AuNCs can be utilized as ECL tags to perform sandwich-type immunoassays with acceptable sensitivity and selectivity, which exhibits a wide linear response for determining CA125 from 0.5 to 1000 mU/mL and a limit of detection of 0.05 mU/mL (S/N = 3).

The efficacy of explicit and implicit learning paradigms was examined during the very early stages of learning the perceptual-motor anticipation task of predicting ball direction from temporally occluded footage of soccer penalty kicks. In addition, the effect of instructional condition on point-of-gaze during learning was examined. A significant improvement in horizontal prediction accuracy was observed in the explicit learning group; however, similar improvement was evident in a placebo group who watched footage of soccer matches. Only the explicit learning intervention resulted in changes in eye movement behaviour and increased awareness of relevant postural cues. Results are discussed in terms of methodological and practical issues regarding the employment of implicit perceptual training interventions.

The reversible photocatalytic color switching systems (PCSSs) driven by semiconductor nanoparticles have attracted considerable attention because of their wide applications. However, the developed semiconductor nanoparticles with photoreductive activity are mainly limited to TiO2-based photocatalysts, which greatly hinder their broad applications. Here we report a cocapping ligand-assisted strategy for the development of photoreductive BiOCl ultrathin nanosheets with abundant oxygen vacancies. Both the cocapping ligands and oxygen vacancies in BiOCl ultrathin nanosheets act as sacrificial electron donors to efficiently scavenge the photogenerated holes, endowing the BiOCl ultrathin nanosheets high photoreductive activity and thus enabling the photocatalytic color switching of redox dyes, such as methylene blue (MB) and neutral red. By successfully integrating the BiOCl ultrathin nanosheet/MB/H2O color switching system with poly(vinyl alcohol) hydrogel to fabricate a twistable gel film and simultaneously solving the dye-leaching issue of the gel film in a water environment, we further demonstrate its application in a colorimetric oxygen indicator for food packaging, exhibiting high sensitivity to monitor oxygen leakage by the naked eye. We believe the work opens a new avenue for designing photoreductive semiconductor nanomaterials to enrich the PCSSs and their applications.

Sub-stoichiometric MoO3-x nanostructures with plasmonic absorption via creating oxygen vacancies have attracted extensive attentions for many intriguing applications. However, the synthesis of one-dimensional (1D) plasmonic MoO3-x nanostructures with widely tunable plasmonic absorption has remained a significant challenge because of their serious morphological destruction and phase change with increasing the concentration of oxygen vacancies. Here we demonstrate a surface-ligand protected reduction strategy for the synthesis of 1D MoO3-x nanobelts with tunable plasmonic absorption in a wide wavelength range from 200 to 2,500 nm. Polyethylene glycol (PEG-400) is used as both the reductant to produce oxygen vacancies and the surface protected ligands to maintain 1D morphology during the formation process of MoO3-x nanobelts, enabling the widely tunable plasmonic absorption. Owing to their broad plasmonic absorption and unique 1D nanostructure, we further demonstrate the application of 1D MoO(3-x)nanobelts as photothermal film for interfacial solar evaporator. The surface-ligand protected reduction strategy provides a new avenue for the developing plasmonic semiconductor oxides with maintained particle morphology and thus enriching their wide applications.