We fabricated and studied solar cells based on a distributed nanocoax architecture by depositing amorphous silicon as photovoltaic medium on arrays of aligned multiwalled carbon nanotubes. These inexpensive cells demonstrate an initial efficiency of 6.1% that can be further enhanced by increasing the nanocoax density per unit area and improving the amorphous silicon quality.

The power conversion efficiency of most thin film solar cells is compromised by competing optical and electronic constraints, wherein a cell must be thick enough to collect light yet thin enough to efficiently extract current. Here, we introduce a nanoscale solar architecture inspired by a well‐known radio technology concept, the coaxial cable, that naturally resolves this “thick–thin” conundrum. Optically thick and elec‐ tronically thin amorphous silicon “nanocoax” cells are in the range of 8% efficiency, higher than any nanostructured thin film solar cell to date. Moreover, the thin nature of the cells reduces the Staebler–Wronski light‐induced degradation effect, a major problem with conventional solar cells of this type. This nanocoax represents a new platform for low cost, high efficiency solar power. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)

Extended abstract of a paper presented at Microscopy and Microanalysis 2009 in Richmond, Virginia, USA, July 26 – July 30, 2009

The open circuit voltage in ultrathin amorphous silicon solar cells is found to increase with light energy (frequency), due to extraction of hot electrons. The ultrathin nature of these junctions also leads to large internal electric fields, yielding reduced recombination and increased current. A simple phenomenological argument provides a qualitative understanding of these effects and gives guidelines for designing future, high-efficiency, hot electron solar cells.

Patterned carbon nanotubes arrays (PCNTA) with reduced density and length were developed with polystyrene sphere masked catalyst dots followed by plasma enhanced chemical vapor deposition method. The nanotubes were then uniformly coated with electropolymerized polypyrrole (PPy). The coating thickness was conformally adjustable. Gold nanoparticles (AuNP) together with glucose oxidase (Gox) were doped into the PPy film on the nanotubes to develop a high performance PCNTA glucose sensor. The sensitivity of the sensor was improved by the co-existence of Gox and AuNP on the carbon nanotube. Moreover, in contrast to previous reported PCNTA glucose sensors, the design herein utilized the entire surface of nanotubes as active sensing areas in order to maximize the Faradic currents. This research outlines a practical avenue to fabricate high performance PCNTA sensor chips with multiple molecules and functional nano-architectures.

Abstract The Hague, Netherlands, 1690. Christiaan Huygens and Sir Isaac Newton, at odds with their competing wave/particle theories of light, today reached a compromise with their unveiling of a new multibeam SEM/FIB instrument featuring an SEM column designed by Huygens that uses electromagnetic lenses to focus the beam of electrons and a FIB column employing electrostatic lenses to focus the beam of ions devised by Newton. Onlookers were dazzled by its extensive capabilities and range of applications.

The International Roadmap for Ferroelectric Memories requires three-dimensional integration of high-dielectric materials onto metal interconnects or bottom electrodes by 2010. Here, we demonstrate the possibility of conformally coating carbon nanotubes with high-dielectric oxide as a first step toward ultrahigh integration density of three-dimensional ferroelectric random access memories.

Compelling evidence of the antenna action of multiwall carbon nanotubes arranged in a random array is provided by demonstrating that the directional radiation characteristics are in good agreement with conventional radio antenna theory and simulations. Basic antenna effects are investigated: the polarization and the antenna length effect. The figure shows the measured radiation pattern from an array of multiwalled carbon nanotubes.

The authors demonstrate transmission of visible light through metallic coaxial nanostructures many wavelengths in length, with coaxial electrode spacing much less than a wavelength. Since the light frequency is well below the plasma resonance in the metal of the electrodes, the propagating mode reduces to the well-known transverse electromagnetic mode of a coaxial waveguide. They have thus achieved a faithful analog of the conventional coaxial cable for visible light.

We have investigated visible light diffraction on honeycomb arrays of aligned carbon nanotubes grown on nickel nanoparticles prepared using the nanosphere lithography. A monolayer of 980nm polystyrene spheres was used as the mask for the deposition of nickel nanoparticles from which carbon nanotubes of 100nm in diameter and up to a couple of microns in length were grown. We show that a standard theory of diffraction from point scatterers explains all the observed diffraction features including Bragg’s law and the strong enhancement of the second and fifth order diffraction spots.