Hyperdimensional computing (HDC) is a human brain-inspired computing paradigm that processes neural activity patterns with high dimensional vectors. Existing HDC accelerators usually utilize different hardware architectures to process encoding phases and comparison phases of HDC applications separately. They are unable to adapt to dynamic workloads for various datasets, resulting in resource underutilization. In this article, we propose a resistive random access memory (ReRAM)-based HDC accelerator called ReHDC for general HDC. We abstract the computing paradigms in encoding and comparison phases, and provide uniform primitive operators to efficiently process these two phases with the same hardware architecture. In the unified processing engine, ReHDC utilizes analog crossbar arrays to accelerate accumulation operations, and digital crossbar arrays to speed up high-dimensional element-wise operations (xor). Experimental results show that ReHDC can accelerate the HDC training by 69.4x and 1.93x, and can also improve the energy efficiency by 51.5 x and 2.2x , compared with NVIDIA Tesla P100 GPU and the ReRAM-based HDC accelerator DUAL, respectively. Moreover, the performance speedup and energy efficiency for HDC inference are similar to that of HDC training.

Emerging resistive random-access memory (ReRAM) based processing-in-memory (PIM) accelerators have been increasingly explored in recent years because they can efficiently perform in-situ matrix-vector multiplication (MVM) operations involved in a wide spectrum of artificial neural networks. However, there remain significant challenges to apply existing ReRAM-based PIM accelerators to the most popular Transformer neural networks. Since Transformers involve a series of matrix-matrix multiplication (MatMul) operations with data dependencies, they should write intermediate results of MatMuls to ReRAM crossbar arrays for further processing. Conventional ReRAM-based PIM accelerators often suffer from high latency of ReRAM writes and intra-layer pipeline stalls. In this paper, we propose ReCAT, a ReRAM-based PIM accelerator designed particularly for Transformers. ReCAT exploits transimpedance amplifiers (TIAs) to cascade a pair of crossbar arrays for MatMul operations involved in the self-attention mechanism. The intermediate result of a MatMul generated by one crossbar array can be directly mapped to another crossbar array, avoiding costly analog-to-digital conversions. In this way, ReCAT allows MVM operations to overlap with the corresponding data mapping, hiding the high latency of ReRAM writes. Furthermore, we propose an analog-to-digital converter (ADC) virtualization scheme to dynamically share scarce ADCs among a group of crossbar arrays, and thus significantly improve the utilization of ADCs to eliminate the performance bottleneck of MVM operations. Experimental results show that ReCAT achieves 207.3 ×, 2.11 ×, and 3.06 × performance improvement on average compared with other Transformer acceleration solutions—GPUs, ReBert, and ReTransformer, respectively.

ReRAM-based Processing-In-Memory (PIM) architectures have been increasingly explored to accelerate various Deep Neural Network (DNN) applications because they can achieve extremely high performance and energy-efficiency for in-situ analog Matrix-Vector Multiplication (MVM) operations. However, since ReRAM crossbar arrays’ peripheral circuits– analog-to-digital converters (ADCs) often feature high latency and low area efficiency, AD conversion has become a performance bottleneck of in-situ analog MVMs. Moreover, since each crossbar array is tightly coupled with very limited ADCs in current ReRAM-based PIM architectures, the scarce ADC resource is often underutilized. In this paper, we propose ReHarvest, an ADC-crossbar decoupled architecture to improve the utilization of ADC resource. Particularly, we design a many-to-many mapping structure between crossbars and ADCs to share all ADCs in a tile as a resource pool, and thus one crossbar array can harvest much more ADCs to parallelize the AD conversion for each MVM operation. Moreover, we propose a multi-tile matrix mapping (MTMM) scheme to further improve the ADC utilization across multiple tiles by enhancing data parallelism. To support fine-grained data dispatching for the MTMM, we also design a bus-based interconnection network to multicast input vectors among multiple tiles, and thus eliminate data redundancy and potential network congestion during multicasting. Extensive experimental results show that ReHarvest can improve the ADC utilization by 3.2 ×, and achieve 3.5 × performance speedup while reducing the ReRAM resource consumption by 3.1 × on average compared with the state-of-the-art PIM architecture–FORMS.

The attention mechanism requires huge computational efforts to process unnecessary calculations, significantly limiting the system's performance. Researchers propose sparse attention to convert some DDMM operations to SDDMM and SpMM operations. However, current sparse attention solutions introduce massive off-chip random memory access. We propose CPSAA, a novel crossbar-based PIM-featured sparse attention accelerator. First, we present a novel attention calculation mode. Second, we design a novel PIM-based sparsity pruning architecture. Finally, we present novel crossbar-based methods. Experimental results show that CPSAA has an average of 89.6X, 32.2X, 17.8X, 3.39X, and 3.84X performance improvement and 755.6X, 55.3X, 21.3X, 5.7X, and 4.9X energy-saving when compare with GPU, FPGA, SANGER, ReBERT, and ReTransformer.

Graph Neural Networks (GNNs) have both graph processing and neural network computational features. Traditional graph accelerators and NN accelerators cannot meet these dual characteristics of GNN applications simultaneously. In this work, we propose a ReRAMbased processing-in-memory (PIM) architecture called ReGNN for GNN acceleration. ReGNN is composed of analog PIM (APIM) modules for accelerating matrix vector multiplication (MVM) operations, and digital PIM (DPIM) modules for accelerating non-MVM aggregation operations. To improve data parallelism, ReGNN maps data to aggregation sub-engines based on the degree of vertices and the dimension of feature vectors. Experimental results show that ReGNN speeds up GNN inference by 228x and 8.4x, and reduces energy consumption by 305.2x and 10.5x, compared with GPU and the ReRAM-based GNN accelerator ReGraphX, respectively.

Memristor-based accelerator (MBA) has demonstrated its capability in accelerating matrix-vector multiplication (MVM) with high performance and energy efficiency. However, it is hard to determine whether and how well an application can benefit from MBAs in a heterogeneous computing architecture. In this article, we propose a simulation framework called MHSim to evaluate the energy efficiency and performance of applications running with both MBAs and CPUs. MHSim provides flexible system-level interfaces and circuit-level simulation models for designers to configure heterogeneous computing architectures. We design a general-purpose MBA which enables floating-point computation models for general matrix-matrix multiplication (GEMM). Our simulation framework can quantify the performance and energy efficiency of different MBA architectures for various applications. We validate our simulation framework with SPICE and evaluate the accuracy and performance of MBAs via several case studies. Experimental results demonstrate that the deviations of energy consumption and latency are only 0.47% and 0.49% on average compared with SPICE-based simulation.

Processing-In-Memory(PIM) has emerged as a high-performance and energy-efficient computing paradigm for accelerating convolutional neural network (CNN) applications. Resistive random access memory (ReRAM) has been widely used in PIM architectures due to its extremely high efficiency for accelerating matrix-vector multiplications through analog computing. However, because CNN training usually requires high-precision computation in the backward propagation (BP) stage, the limited precision of analog PIM accelerators impedes their adoption in CNN training. In this article, we propose ReHy, a hybrid PIM accelerator to support CNN training in ReRAM arrays. It is composed of Analog PIM (APIM) and Digital PIM (DPIM) modules. ReHy uses APIM to accelerate the feed-forward propagation (FP) stage for high performance, and DPIM to process the BP stage for high accuracy. We exploit the capability of ReRAM for Boolean logic operations to design the DPIM architecture. Particularly, we design floating-point multiplication and addition operators to support matrix multiplications in ReRAM arrays. We also propose a performance model to offload high-precision matrix multiplications to DPIM according to the data parallelism. Experimental results show that ReHy can speed up CNN training by 48.8x and 2.4x, and reduce energy consumption by 35.1x and 2.33x, compared with CPU/GPU architectures (baseline) and the state-of-the-art FloatPIM, respectively.