ABSTRACTThe synthesis and systematic comparison of a comprehensive library of well‐defined polymer architectures based on poly(acrylic acid) is reported. Through the development of new synthetic methodologies, linear, single branched, precision‐branched comb, and star polymers were prepared and their performance as dispersants was evaluated. The ability to accurately control chain lengths and branch points allows the subtle interplay between structure and dispersant performance to be defined and affords critical insights into the design of improved polymeric additives for coating formulations. The general industrial relevance of ionic polymers and branched macromolecular architectures supports these design rules for a wide range of other applications and materials, including as additives for personal care products and in water treatment. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 716–725

A light-mediated method for the facile removal of polymer end groups that are common to controlled radical polymerization techniques is presented. This metal-free strategy is general, being effective for chlorine, bromine, and thiocarbonylthio moieties as well as a number of different polymer families (styrenic, acrylic, and methacrylic). In addition to solution reactions, this process is readily translated to thin films, where light mediation allows the straightforward fabrication of hierarchically patterned polymer brushes.

Despite the number of methods available for dehalogenation and carbon-carbon bond formation using aryl halides, strategies that provide chemoselectivity for systems bearing multiple carbon-halogen bonds are still needed. Herein, we report the ability to tune the reduction potential of metal-free phenothiazine-based photoredox catalysts and demonstrate the application of these catalysts for chemoselective carbon-halogen bond activation to achieve C-C cross-coupling reactions as well as reductive dehalogenations. This procedure works both for conjugated polyhalides as well as unconjugated substrates. We further illustrate the usefulness of this protocol by intramolecular cyclization of a pyrrole substrate, an advanced building block for a family of natural products known to exhibit biological activity.

The development of an operationally simple, metal-free surface-initiated atom transfer radical polymerization (SI-ATRP) based on visible-light mediation is reported. The facile nature of this process enables the fabrication of well-defined polymer brushes from flat and curved surfaces using a "benchtop" setup that can be easily scaled to four-inch wafers. This circumvents the requirement of stringent air-free environments (i.e., glovebox), and mediation by visible light allows for spatial control on the micron scale, with complex three-dimensional patterns achieved in a single step. This robust approach leads to unprecedented access to brush architectures for nonexperts.

Solution-exchange lithography is a new modular approach to engineer surfaces via sequential photopatterning. An array of lenses reduces features on an inkjet-printed photomask and reproduces arbitrarily complex patterns onto surfaces. In situ exchange of solutions allows successive photochemical reactions without moving the substrate and affords access to hierarchically patterned substrates.

Triazine-based unimolecular initiators are shown to mediate the controlled radical polymerization of several monomer classes, yielding polymers with low dispersities, targeted molecular weights, and active chain ends. We report the modular synthesis of structurally and electronically diverse triazine-based unimolecular initiators and demonstrate their ability to efficiently control the radical polymerization of modified styrene monomers. Copolymerizations of styrene with butyl acrylate or methyl methacrylate were conducted to highlight the monomer family tolerance of this system. Notably, in the case of methyl methacrylate and styrene, up to 90 mol% methyl methacrylate comonomer loadings could be achieved while maintaining a controlled polymerization, allowing the synthesis of a range of block copolymers. This class of triazine-based mediators has the potential to complement current methods of controlled radical polymerization and marks an important milestone in ongoing efforts to develop initiators and mediators with high monomer tolerance that are both metal and sulfur-free.

ABSTRACTThe untapped potential of radical thiol‐yne mono‐addition chemistry is exploited to overcome the known limitations of thiol‐ene chemistry in polymer coupling and block copolymer formation. By careful choice of alkyne, the reaction can selectively lead to the mono‐addition product with efficiencies surpassing those achieved by traditional thiol‐ene chemistry. This improvement is illustrated by the nearly quantitative synthesis of a variety of diblock and graft copolymers. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015, 53, 319–326

Here we report the use of 10-phenylphenothiazine (PTH) as an inexpensive, highly reducing metal-free photocatalyst for the reduction of carbon-halogen bonds via the trapping of carbon-centered radical intermediates with a mild hydrogen atom donor. Dehalogenations were carried out on various substrates with excellent yields at room temperature in the presence of air.

ABSTRACTHerein we develop a facile synthetic strategy for the functionalization of well‐defined polyether copolymers with control over the number and location of catechol groups. Previously, the functionalization of polyethylene oxide (PEO)‐based polymers with catechols has been limited to functionalization of the chain ends only, hampering the synthesis of adhesive and antifouling materials based on this platform. To address this challenge, we describe an efficient and high‐yielding route to catechol‐functionalized polyethers, which could allow the effects of polymer architecture, molecular weight, and catechol incorporation on the adhesive properties of surface‐anchored PEO to be studied. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015, 53, 2685–2692

A series of novel lipid-inspired ionic liquids have been synthesized employing the thiol-ene "click" reaction in a single-step process. The thermal properties were determined by differential scanning calorimetry (DSC) and showed observable trends between the C-16, C-18, and C-20 analogues. The minimum melting points for each equivalent chain length series occur at sequential odd sulfur positions, 3, 5, and 7 for the C-16, C-18, and C-20 series, respectively. The magnitude of melting point depression relative to the saturated homologue is observed to have a strong dependence on the position of the sulfur in the side chain. Additionally, the sulfur position corresponding to the lowest melting point for a homologous series shifts further down the chain as the chain length is increased, indicating that the maximum effect takes place near the center of the ion and not the center of the thiaalkyl chain. This synthesis provides tunability and improved thermal stability for 1-methyl-3-thiaalkylimidazolium bistriflimides and insight into structure-property relationships of lipidic ionic liquids.

Polymer chemists, through advances in controlled polymerization techniques and reliable post-functionalization methods, now have the tools to create materials of almost infinite variety and architecture. Many relevant challenges in materials science, however, require not only functional polymers but also on-demand access to the properties and performance they provide. The power of such temporal and spatial control of polymerization can be found in nature, where the production of proteins, nucleic acids, and polysaccharides helps regulate multicomponent systems and maintain homeostasis. Here we review existing strategies for temporal control of polymerizations through external stimuli including chemical reagents, applied voltage, light, and mechanical force. Recent work illustrates the considerable potential for this emerging field and provides a coherent vision and set of criteria for pursuing future strategies for regulating controlled polymerizations.

A simple approach for the preparation of symmetrical quaternary ammonium bromides employing thiol–ene click chemistry is used to synthesize tetra(4-thiaalkyl)ammonium bromides. This approach allows the incorporation of a variety of alkyl moieties onto the nitrogen center with a one-step synthesis involving easy work-up, no side reactions and environmentally friendly reagents. To elucidate information regarding the behaviour of this novel class of compounds, comparisons to tetraalkylammonium analogues have been made. These include melting points, activity as phase-transfer catalysts, and conformational predictions from computational modelling. All results are consistent in indicating stronger bonding between the quaternary cation and the anion for the salts with 4-thiaalkyl chains as compared to those with n-alkyl chains.

AbstractDurch Fortschritte bei Verfahren zur kontrollierten Polymerisation und die Entwicklung verlässlicher Postfunktionalisierungsmethoden stehen Chemikern heute Werkzeuge zur Verfügung, um Materialien nahezu jeglicher Art und Architektur herzustellen. Viele wichtige Herausforderungen in den Materialwissenschaften verlangen jedoch nicht nur die Herstellung funktioneller Polymere, sondern darüber hinaus auch einen gezielten Zugang zu spezifischen Eigenschaften dieser Materialien. Eine beeindruckende zeitliche und räumliche Polymerisationskontrolle beobachten wir in der Natur, wo die Bildung von Proteinen, Nukleinsäuren und Polysacchariden zur Regulation von Mehrkomponentensystemen beiträgt und die Homöostase aufrechterhält. Hier geben wir einen Überblick über vorhandene Strategien zur zeitlichen Kontrolle von Polymerisationen durch externe Stimuli, wie z. B. chemische Reagentien, elektrische Spannung, Licht und mechanische Kraft. Neueste Arbeiten veranschaulichen das beträchtliche Potential dieses noch jungen Gebiets und liefern einen Satz von Kriterien für zukünftige Strategien zur Regulation kontrollierter Polymerisationen.