The improved laser-to-pedestal contrast ratio enabled by current high-power laser pulse cleaning techniques allows the fine features of the target survive before the main laser pulse arrives. We propose to introduce the nano-fabrication technologies into laser–plasma interaction to explore the novel effects of micro-structures. We found out that not only laser-driven particle sources but also the laser pulse itself can be manipulated by specifically designed micro-cylinder and -tube targets, respectively. The proposal was supported by full-3D particle-in-cell simulations and successful proof-of-principle experiments for the first time. We believe this would open a way to manipulate relativistic laser–plasma interaction at the micro-size level.

We report on the recently completed 400 TW upgrade to the Scarlet laser at The Ohio State University. Scarlet is a Ti:sapphire-based ultrashort pulse system that delivers >10 J in 30 fs pulses to a 2 μm full width at half-maximum focal spot, resulting in intensities exceeding 5×1021 W/cm2. The laser fires at a repetition rate of once per minute and is equipped with a suite of on-demand and on-shot diagnostics detailed here, allowing for rapid collection of experimental statistics. As part of the upgrade, the entire laser system has been redesigned to facilitate consistent, characterized high intensity data collection at high repetition rates. The design and functionality of the laser and target chambers are described along with initial data from commissioning experimental shots.

Efficient coupling of intense laser pulses to solid-density matter is critical to many applications including ion acceleration for cancer therapy. At relativistic intensities, the focus has been mainly on investigating various laser beams irradiating initially overdense flat interfaces with little or no control over the interaction. Here, we propose a novel approach that leverages recent advancements in 3D direct laser writing (DLW) of materials and high contrast lasers to manipulate the laser-matter interactions on the micro-scales. We demonstrate, via simulations, that usable intensities ≥10 23 Wcm −2 could be achieved with current tabletop lasers coupled to micro-engineered plasma lenses. We show that these plasma optical elements act as a lens to focus laser light. These results open new paths to engineering light-matter interactions at ultra-relativistic intensities.

A hollow, cylindrical, micron-scale structure is proposed to enhance and manipulate the laser plasma interaction. It is shown through 3-D particle-in-cell simulations that the incident laser pulse intensity is enhanced within the tube. A detailed study of the intensification optimizes the tube dimensions and provides a characterization of the in-tube intensity. By coupling the micro-tube plasma lens to a traditional flat interface, we show an increase in on-target intensity. We detail proton energy enhancement as a potential application of the micro-tube plasma lens target, where the tube structure focuses the light and provides additional electrons that enhance the accelerating sheath field.

We report on the recently completed 400 TW upgrade to the Scarlet laser at The Ohio State University. Scarlet is a Ti: sapphire-based ultrashort pulse system that delivers > 10 J in 30 fs pulses to a 2 mu m full width at half-maximum focal spot, resulting in intensities exceeding 5 x 10(21) W/cm(2). The laser fires at a repetition rate of once per minute and is equipped with a suite of on-demand and on-shot diagnostics detailed here, allowing for rapid collection of experimental statistics. As part of the upgrade, the entire laser system has been redesigned to facilitate consistent, characterized high intensity data collection at high repetition rates. The design and functionality of the laser and target chambers are described along with initial data from commissioning experimental shots. (C) 2016 Optical Society of America

We report on the first successful proof-of-principle experiment to manipulate laser-matter interactions on microscales using highly ordered Si microwire arrays. The interaction of a high-contrast short-pulse laser with a flat target via periodic Si microwires yields a substantial enhancement in both the total and cutoff energies of the produced electron beam. The self-generated electric and magnetic fields behave as an electromagnetic lens that confines and guides electrons between the microwires as they acquire relativistic energies via direct laser acceleration.

A diagnostic tool for precise alignment of targets in laser-matter interactions based on confocal microscopy is presented. This device permits precision alignment of targets within the Rayleigh range of tight focusing geometries for a wide variety of target surface morphologies. This confocal high-intensity positioner achieves micron-scale target alignment by selectively accepting light reflected from a narrow range of target focal planes. Additionally, the design of the device is such that its footprint and sensitivity can be tuned for the desired chamber and experiment. The device has been demonstrated to position targets repeatably within the Rayleigh range of the Scarlet laser system at The Ohio State University, where use of the device has provided a marked increase in ion yield and maximum energy.

This report summarizes the experimental results of a study aimed at achieving star-like plasmas in the laboratory by isochrically heating solid-density targets with intense lasers. Of special interest is the investigation of spatial/temporal temperature and density gradients and their dependence on the target geometry and mass. The investigation was carried out in two phases. In the first phase, solid targets with variable transverse and longitudinal dimensions were investigated. We found that electron beam recirculation is enhanced for reduced mass targets. As a result, the temperature gradients are minimized for these targets yielding more uniform temperature hot plasmas. In the second phase, reduced mass targets were irradiated with intense ultra-short laser pulses. Bright monochromatic x-rays and broadband Extreme ultraviolet radiation (EUV or XUV) emissions were achieved by optimizing the electrostatic sheath fields surrounding the target. The study also revealed that this laser-driven source of radiation has a small source size, short duration, and high photon fluxes suitable for point projection radiography and for probing matter under extreme environments.

Efficient coupling of intense laser pulses to solid-density matter is critical to many applications including ion acceleration for cancer therapy. At relativistic intensities, the focus has been mainly on investigating various laser beams irradiating initially flat interfaces with little or no control over the interaction. Here, we propose a novel approach that leverages recent advancements in 3D direct laser writing (DLW) of materials and high contrast lasers to manipulate the laser-matter interactions on the micro-scales. We demonstrate, via simulations, that usable intensities >10^23Wcm^(-2) could be achieved with current tabletop lasers coupled to 3D printed plasma lenses. We show that these plasma optical elements act not only as a lens to focus laser light, but also as an electromagnetic guide for secondary particle beams. These results open new paths to engineering light-matter interactions at ultra-relativistic intensities.

We report the results of a combined study of particle-in-cell and Monte Carlo modeling that investigates the production of Bremsstrahlung radiation produced when an ultraintense laser interacts with a tower-structured target. These targets are found to significantly narrow the electron angular distribution as well as produce significantly higher energies. These features combine to create a significant enhancement in directionality and energy of the Bremstrahlung radiation produced by a high-Z converter target. These studies employ short-pulse, high intensity laser pulses, and indicate that novel target design has potential to greatly enhance the yield and narrow the directionality of high energy electrons and γ-rays. We find that the peak γ-ray brightness for this source is 6.0 × 1019 s−1 mm−2 mrad−2 at 10 MeV and 1.4 × 1019 s−1 mm−2 mrad-2 at 100 MeV (0.1% bandwidth).

When extremely intense lasers (I >= 10(22) W/cm(2)) interact with plasmas, a significant fraction of the pulse energy is converted into photon emission in the multi-MeV energy range. This emission results in a radiation reaction (RR) force on electrons, which becomes important at ultrahigh intensities. Using three-dimensional particle-in-cell simulations which include a quantum electrodynamics model for the gamma-photons emission, the corresponding RR force and electron-positron pair creation, the energy partition in the laser-plasma system is investigated. At sufficiently high laser amplitudes, the fraction of laser energy coupled to electrons decreases, while the energy converted to gamma-photons increases. The interaction becomes an efficient source of gamma-rays when I > 10(24) W/cm(2), with up to 40% of the laser energy converted to high-energy photons. A systematic study of energy partition and gamma-photon emission angle shows the influence of laser intensity and polarization for two plasma conditions: high-density carbon targets and a low-density hydrogen targets. We find that in the opaque region, the laser-to-photon conversion efficiency scales as I-0(3/2) for linearly polarized and I-0(2-2.5) for circularly polarized lasers, respectively. In the relativistically transparent regime, the power-laws merge into I-0(1/2) for both polarizations and photon emission peaks in the forward direction with a relatively small divergence angle (<20 degrees), resulting in a collimated gamma-ray beam. (C) 2014 AIP Publishing LLC.

Refluxing of fast electrons generated by high-intensity, short-pulse lasers was investigated by measuring electron-induced Kα x rays from a buried tracer layer. Using planar foils of Au/Cu/CH, the 150-J, 0.7-ps TITAN short-pulse laser was focused on the gold foil to generate fast electrons and the 3-ns, 300-J long pulse beam irradiated on the CH side to create expanding plasma as a conducting medium. By delaying the short-pulse beam timing from the long pulse laser irradiation, the plasma size was varied to change electron refluxing in the target rear. The total yields and two-dimensional images of 8.05-keV Cu-Kα x ray were recorded with an x-ray spectrometer and two monochromatic crystal imagers. The measurements show that the integrated yields decrease by a factor of 10 from refluxing to the nonrefluxing limit. Similar radial profiles of the Kα images in the rear were observed at all delays. Hybrid-particle-in-cell simulations using plasma profiles calculated by a radiation-hydrodynamic code HYDRA agree well with the measured Kα yields. The simulations suggest that conducting plasma with the size of ∼300 μm in the laser direction and ∼600 μm in the lateral direction at the density of 2 × 1020 1/cm3 is sufficiently large to prevent electrons from refluxing in the target. The parameters found in this study can be useful in designing experiments utilizing a Kα x-ray source in refluxing regime or a tracer layer in nonrefluxing regime.

We present experiments studying the behavior of warm dense copper and chromium, isochorically heated from solid density using petawatt laser accelerated protons. Temperature and expansion measurements are compared to hydrodynamic simulations using modern EOS models.

We have developed a new type of target for intense laser-matter experiments that offers significant advantages over those currently in use. The targets consist of a liquid crystal film freely suspended within a metal frame. They can be formed rapidly on-demand with thicknesses ranging from nanometers to micrometers, where the particular value is determined by the liquid crystal temperature and initial volume as well as by the frame geometry. The liquid crystal used for this work, 8CB (4'-octyl-4-cyanobiphenyl), has a vapor pressure below 10^-6 Torr, so films made at atmospheric pressure maintain their initial thickness after pumping to high vacuum. Additionally, the volume per film is such that each target costs significantly less than one cent to produce. The mechanism of film formation and relevant physics of liquid crystals are described, as well as ion acceleration data from the first shots on liquid crystal film targets at the Ohio State University Scarlet laser facility.