Tumor draining lymph nodes (TDLN) represent a key component of the tumor-immunity cycle. There are few studies describing how TDLNs impact lymphocyte infiltration into tumors. Here we directly compare tumor-free TDLNs draining "cold" and "hot" human triple negative breast cancers (TDLNCold and TDLNHot). Using machine-learning-based self-correlation analysis of immune gene expression, we find unbalanced intranodal regulations within TDLNCold. Two gene pairs (TBX21/GATA3-CXCR1) with opposite correlations suggest preferential priming of T helper 2 (Th2) cells by mature dendritic cells (DC) within TDLNCold. This is validated by multiplex immunofluorescent staining, identifying more mature-DC-Th2 spatial clusters within TDLNCold versus TDLNHot. Associated with this Th2 priming preference, more IL4 producing mast cells (MC) are found within sinus regions of TDLNCold. Downstream, Th2-associated fibrotic TME is found in paired cold tumors with increased Th2/T-helper-1-cell (Th1) ratio, upregulated fibrosis growth factors, and stromal enrichment of cancer associated fibroblasts. These findings are further confirmed in a validation cohort and public genomic data. Our results reveal a potential role of IL4+ MCs within TDLNs, associated with Th2 polarization and reduced immune infiltration into tumors.

While vat photopolymerization has many advantages over soft lithography in fabricating microfluidic devices, including efficiency and shape complexity, it has difficulty achieving well-controlled micrometer-sized (smaller than 100 μm) channels in the layer building direction. The considerable light penetration depth of transparent resin leads to over-curing that inevitably cures the residual resin inside flow channels, causing clogs. In this paper, a 3D printing process - in-situ transfer vat photopolymerization is reported to solve this critical over-curing issue in fabricating microfluidic devices. We demonstrate microchannels with high Z-resolution (within 10 μm level) and high accuracy (within 2 μm level) using a general method with no requirements on liquid resins such as reduced transparency nor leads to a reduced fabrication speed. Compared with all other vat photopolymerization-based techniques specialized for microfluidic channel fabrication, our universal approach is compatible with commonly used 405 nm light sources and commercial photocurable resins. The process has been verified by multifunctional devices, including 3D serpentine microfluidic channels, microfluidic valves, and particle sorting devices. This work solves a critical barrier in 3D printing microfluidic channels using the high-speed vat photopolymerization process and broadens the material options. It also significantly advances vat photopolymerization's use in applications requiring small gaps with high accuracy in the Z-direction.

A systematic study of the protein corona's effect on nanoparticle–biomembrane electrostatic interactions. Nanoparticle adhesion and membrane integrity upon interaction were compared between plasma membranes and biomimetic membranes.

Transition metal carbides (TMCs) have demonstrated outstanding potential for utilization in a wide range of catalytic applications because of their inherent multifunctionality and tunable composition. However, the harsh conditions required to prepare these materials have limited the scope of synthetic control over their physical properties. The development of low-temperature, carburization-free routes to prepare TMCs would unlock the versatility of this class of materials, enhance our understanding of their physical properties, and enable their cost-effective production at industrial scales. Here, we report an exceptionally mild and scalable solution-phase synthesis route to phase-pure molybdenum carbide (α-MoC1-x) nanoparticles (NPs) in a continuous flow millifluidic reactor. We exploit the thermolytic decomposition of Mo(CO)6 in the presence of a surface-stabilizing ligand and a high boiling point solvent to yield MoC1-x NPs that are colloidally stable and resistant to bulk oxidation in air. To demonstrate the utility of this synthetic route to prepare catalytically active TMC NPs, we evaluated the thermochemical CO2 hydrogenation performance of α-MoC1-x NPs dispersed on an inert carbon support. The α-MoC1-x/C catalyst exhibited a 2-fold increase in both activity on a per-site basis and selectivity to C2+ products as compared to the bulk α-MoC1-x analogue.

We developed a 16-channel millifluidic reactor that uses a multiphase gas-liquid flow to continuously produce colloidal CsPbBr3 quantum dots with a throughtput of ∼1 L h-1. The optical properties of the product were monitored, and the reaction conditions were optimized in real time based on the in situ photoluminescence characteristics of the quantum dots.

One of the obstacles preventing the commercialization of colloidal nanoparticle catalysts is the difficulty in fabricating these materials at scale while maintaining a high level of control over their resulting morphologies, and ultimately, their properties. Translation of batch-scale solution nanoparticle syntheses to continuous flow reactors has been identified as one method to address the scaling issue. The superior heat and mass transport afforded by the high surface-area-to-volume ratios of micro- and millifluidic channels allows for high control over reaction conditions and oftentimes results in decreased reaction times, higher yields, and/or more monodisperse size distributions compared to an analogous batch reaction. Furthermore, continuous flow reactors are automatable and have environmental health and safety benefits, making them practical for commercialization. Herein, a discussion of continuous flow methods, reactor design, and potential challenges is presented. A thorough account of the implementation of these technologies for the fabrication of catalytically active metal nanoparticles is reviewed for hydrogenation, electrocatalysis, and oxidation reactions.

The translation of batch chemistries to high throughput flow methods addresses scaling concerns associated with the implementation of colloidal nanoparticle (NP) catalysts for industrial processes. A literature procedure for the synthesis of Ni-NPs was adapted to a continuous millifluidic (mF) flow method, achieving yields >60%. Conversely, NPs prepared in a batch (B) reaction under conditions analogous to the continuous flow conditions gave only a 45% yield. Both mF- and B-Ni-NP catalysts were supported on SiO2 and compared to a Ni/SiO2 catalyst prepared by traditional incipient wetness (IW) impregnation for the hydrodeoxygenation (HDO) of guaiacol under ex situ catalytic fast pyrolysis conditions (350 degrees C, 0.5 MPa). Compared to the IW method, both colloidal NPs displayed increased morphological control and narrowed size distributions, and the NPs prepared by both methods showed similar size, shape, and crystallinity. The Ni-NP catalyst synthesized by the continuous flow method exhibited similar H-adsorption site densities, site-time yields, and selectivities toward deoxygenated products compared to the analogous batch-prepared catalyst, and it outperformed the BY catalyst with respect to higher selectivity to lower oxygen content products and a 31-fold decrease in deactivation rate. These results demonstrate the utility of synthesizing colloidal Ni-NP catalysts using flow methods that can produce >27 g/day of Ni-NPs (equivalent to >0.5 kg of 5 wt % Ni/SiO2), while maintaining the catalytic properties displayed by the batch equivalent.

The surface chemistry of the cell membrane plays an important role in how cells interact with particulate species. These interactions are dictated in large part by lipid headgroup charge. To investigate the nature of electrostatic interactions between lipid bilayers and nanoparticles in solution, we studied nanoparticles interacting with the zwitterionic lipid 1,2-dioleoyl-glycero-3-phosphocholine (DOPC), and its inverted-headgroup analog DOCP. These interactions were investigated by fabricating giant unilamellar vesicles (GUVs) with DOPC lipids and DOCP lipids respectively, and introducing nanoparticles to suspensions of both. GUVs displayed various deformational modes depending on the charge and size of the nanoparticles as well as the compositions of the GUVs. The differences in the responses of the two lipid species illuminate how the phosphate and choline groups on the lipid interact with charged nanoparticles. This study suggests that the phosphate group dominates the lipid-nanoparticle electrostatic interaction. We speculate that the formation of water clathrate structures around the choline group inhibits interactions between negatively charged nanoparticles and the positively charged choline.