Plasma-wakefield-based acceleration technology has the potential to revolutionize the field of particle accelerators. By providing acceleration gradients orders of magnitude larger than conventional radiofrequency particle accelerators, this technology allows accelerators to be reduced to the centimetre length scale. It also provides a new compact approach for driving free-electron lasers, a valuable source of high-brilliance ultrashort coherent radiation within the infrared to X-ray spectral range for the study of subatomic matter, ultrafast dynamics of complex systems and X-ray nonlinear optics, among other applications. Several laboratories around the world are working on the realization of these new light sources, exploring different configurations for the plasma wakefield driver beam, plasma stage design and operational regime. This Review describes the operating principles of plasma accelerators, an overview of recent experimental milestones for plasma-driven free-electron lasers in self-amplified spontaneous emission and seeded configurations, and highlights the remaining major challenges in the field. This Review examines the principles of operation and progress made in developing free-electron lasers that feature plasma-wakefield-acceleration technology.

The lattice of SOLEIL II, the SOLEIL upgrade project, consists of alternating 7BA and 4BA High Order Achromat (HOA) type cells and provides a natural emittance of 80 pm.rad at an energy of 2.75GeV. Such HOA lattice necessitates over a thousand magnets. Adapting this lattice to the existing tunnel space requires the use of compact yet high-field magnets, leaving minimal room in between. To reduce SOLEIL II power consumption, the magnetic design of dipoles and quadrupoles is based on permanent magnet technology. Correctors, sextupoles and octupoles are resistive magnets. This paper offers a comprehensive overview of the current status of magnet design for SOLEIL II.

Introduction SOLEIL [1] offers with its 29 beamlines a wide energy range (from THz to hard X-ray), a large variety of experimental techniques, and sample environments to its users. The ongoing proposal for an upgrade of SOLEIL presents an ambitious design of the Diffraction Limited Storage Ring (DLSR) [2], which will provide an increase in brilliance, coherence, and flux. These new performances will be accompanied by new access modes in order to make the most efficient use of the upgraded facility in an open data perspective. The multidisciplinary environment that leads to several scientific methods at SOLEIL yields huge volumes of data using a variety of techniques in characterizing different forms of matter. Figure 1 illustrates the digital transformation required toward automated and datadriven processes for addressing future scientific challenges and also for optimizing instrumentation manufacturing, measurement, and metrology tasks developed for the SOLEIL facility reconstruction. Automation is considered from end-to-end, from the detectors coupled with acquisition scanning developments, including robotic systems. These processes will integrate Artificial Intelligence (AI) algorithms applied to decision making, complex feedbacks, and data processing. The large data production processed in an AI manner will improve the statistical quality of the extracted data. To address the end-to-end automation, two kinds of mechatronic improvements are foreseen: • One based on an arm robot, which can be used as a sample changer, handling insertion device magnets or detectors in large workspaces. • One for instruments under Ultra-High Vacuum (UHV) conditions, which require new mechatronics approaches for fast sample entry and transfer in UHV environments. This design, similar to the MAESTRO [3] approach at the Advanced Light Source (ALS) [4], will need longer-term developments.

Figure 20.1 was not correct in the published article. The original article has been corrected. The published apologizes for the inconvenience.

The fourth generation of synchrotron radiation sources, commonly referred to as the Free Electron Laser (FEL), provides an intense source of brilliant X-ray beams enabling the investigation of matter at the atomic scale with unprecedented time resolution. These sources require the use of conventional linear accelerators providing high electron beam performance. The achievement of chirped pulse amplification allowing lasers to be operated at the Terawatt range, opened the way for the Laser Plasma Acceleration (LPA) technique where high energy electron bunches with high current can be produced within a very short centimeter-scale distance. Such an advanced acceleration concept is of great interest to be qualified by an FEL application for compact X-ray light sources. We explore in this paper what the LPA specificities imply on the design of the undulator, part of the gain medium. First, the LPA concept and state-of-art are presented showing the different operation regimes and what electron beam parameters are likely to be achieved. The LPA scaling laws are discussed afterwards to better understand what laser or plasma parameters have to be adjusted in order to improve electron beam quality. The FEL is secondly discussed starting with the spontaneous emission, followed by the different FEL configurations, the electron beam transport to the undulator and finally the scaling laws and correction terms in the high gain case. Then, the different types of compact undulators that can be implemented for an LPA based FEL application are analyzed. Finally, examples of relevant experiments are reported by describing the transport beamline, presenting the spontaneous emission characteristics achieved so far and the future prospects.

Plasma-based accelerators use the strong electromagnetic fields that can be supported by plasmas to accelerate charged particles to high energies. Accelerating field structures in plasma can be generated by powerful laser pulses or charged particle beams. This research field has recently transitioned from involving a few small-scale efforts to the development of national and international networks of scientists supported by substantial investment in large-scale research infrastructure. In this New Journal of Physics 2020 Plasma Accelerator Roadmap, perspectives from experts in this field provide a summary overview of the field and insights into the research needs and developments for an international audience of scientists, including graduate students and researchers entering the field.

Plasma-based accelerators use the strong electromagnetic fields that can be supported by plasmas to accelerate charged particles to high energies. Accelerating field structures in plasma can be generated by powerful laser pulses or charged particle beams. This research field has recently transitioned from involving a few small-scale efforts to the development of national and international networks of scientists supported by substantial investment in large-scale research infrastructure. In this New Journal of Physics 2020 Plasma Accelerator Roadmap, perspectives from experts in this field provide a summary overview of the field and insights into the research needs and developments for an international audience of scientists, including graduate students and researchers entering the field.

Owing to their ultra-high accelerating gradients, combined with injection inside micrometer-scale accelerating wakefield buckets, plasma-based accelerators hold great potential to drive a new generation of free-electron lasers（FELs）. Indeed,the first demonstration of plasma-driven FEL gain was reported recently, representing a major milestone for the field.Several groups around the world are pursuing these novel light sources, with methodology varying in the use of wakefield driver（laser-driven or beam-driven）, plasma structure, phase-space manipulation, beamline design, and undulator technology, among others. This paper presents our best attempt to provide a comprehensive overview of the global community efforts towards plasma-based FEL research and development.

This report presents the conceptual design of a new European research infrastructure EuPRAXIA. The concept has been established over the last four years in a unique collaboration of 41 laboratories within a Horizon 2020 design study funded by the European Union. EuPRAXIA is the first European project that develops a dedicated particle accelerator research infrastructure based on novel plasma acceleration concepts and laser technology. It focuses on the development of electron accelerators and underlying technologies, their user communities, and the exploitation of existing accelerator infrastructures in Europe. EuPRAXIA has involved, amongst others, the international laser community and industry to build links and bridges with accelerator science - through realising synergies, identifying disruptive ideas, innovating, and fostering knowledge exchange. The Eu-PRAXIA project aims at the construction of an innovative electron accelerator using laser- and electron-beam-driven plasma wakefield acceleration that offers a significant reduction in size and possible savings in cost over current state-of-the-art radiofrequency-based accelerators. The foreseen electron energy range of one to five gigaelectronvolts (GeV) and its performance goals will enable versatile applications in various domains, e.g. as a compact free-electron laser (FEL), compact sources for medical imaging and positron generation, table-top test beams for particle detectors, as well as deeply penetrating X-ray and gamma-ray sources for material testing. EuPRAXIA is designed to be the required stepping stone to possible future plasma-based facilities, such as linear colliders at the high-energy physics (HEP) energy frontier. Consistent with a high-confidence approach, the project includes measures to retire risk by establishing scaled technology demonstrators. This report includes preliminary models for project implementation, cost and schedule that would allow operation of the full Eu-PRAXIA facility within 8-10 years.

Laser-plasma accelerators (LPA) deliver relativistic electron beams with high peak current and low emittance, with energies up to the GeV-level in only few centimetres. However, the divergence and the energy spread of these beams remain too large for potential light source applications. A magnetic transfer line can be used to manipulate the electron beam phase-space and select the transmitted energies with a slit located at its center. We will show that with a proper focusing optics along the line, one can tune the energy spread of the beam at a given energy without loss and produce undulator radiation with controlled bandwidth. We present analytic studies, numerical simulations and experimental results on the controled electron beam transport and application to undulator radiation with a control of the bandwidth.

While synchrotron light facilities and Free Electron Lasers (FELs) are widely used for matter investigation, Laser Plasma Acceleration (LPA), delivering nowadays GeV electron beams in few centimeter accelerating distance, can be considered to drive undulator radiation and FEL. We report on the generation of undulator radiation on the COXINEL dedicated manipulation line designed for an FEL application. The LPA large divergence is handled with variable gradient permanent magnet quadrupoles and the high energy spread is reduced via a magnetic chicane. We evidence the undulator spatio-spectral signature on the first and second harmonics while measuring the radiation focused onto the entrance slit of a spectrometer equipped with a CDD camera. A good agreement is found between measurements and SRW simulations, using electron beam parameters in the undulator deduced from the measured initial electron beam parameters transported along the beamline. In addition, ray optics approach is compared to Fourier optics for the radiation propagation through optical elements.

The spectacular development of Laser-Plasma Accelerators (LPA) appears very promising for a free electron laser application. The handling of the inherent properties of those LPA beams already allowed controlled production of LPA-based spontaneous undulator radiation. Stepping further, we here unveil that the forthcoming LPA-based seeded FELs will present singular spatio-spectral distributions. Relying on numerical simulations and simple analytical models, we show how those interferometric patterns can be exploited to retrieve, in single-shot, the spectro-temporal content and source point properties of the FEL pulses.

Since the laser invention [1, 2], the advent of Free Electron Lasers (FEL) [3, 4] in the X-ray domain half a century later, has opened new areas for matter investigation with higher temporal resolution. In parallel, the development of laser plasma acceleration (LPA) [5] that delivers today several GeV beam acceleration [6] in a short distance appears also very promising. The qualification of the LPA for FEL application can thus be viewed as an important challenge [7]. Nevertheless, present LPA electron beam parameters (e. g. energy spread and beam divergence) do not meet conventional accelerator state-of-the-art performance and FEL application requires a specific beam handling. In such a prospect, the COXINEL beam manipulation line [8, 9] using variable permanent magnet quadrupoles for emittance growth mitigation and de-mixing chicane for the energy spread handling developed at SOLEIL has been installed for using electrons produced with an intense laser of Laboratoire d'Optique Appliquee (LOA). Strategies for controlling electron beam position and dispersion have been elaborated and demonstrated [10]. Finally, undulator spontaneous emission has been measured at the end of the line.

Plasma accelerators present one of the most suitable candidates for the development of more compact particle acceleration technologies, yet they still lag behind radiofrequency (RF)-based devices when it comes to beam quality, control, stability and power efficiency. The Horizon 2020-funded project EuPRAXIA ("European Plasma Research Accelerator with eXcellence In Applications") aims to overcome the first three of these hurdles by developing a conceptual design for a first international user facility based on plasma acceleration. In this paper we report on the main features, simulation studies and potential applications of this future research infrastructure.

The Horizon 2020 project EuPRAXIA (European Plasma Research Accelerator with eXcellence In Applications) is producing a conceptual design report for a highly compact and cost-effective European facility with multi-GeV electron beams accelerated using plasmas. EuPRAXIA will be set up as a distributed Open Innovation platform with two construction sites, one with a focus on beam-driven plasma acceleration (PWFA) and another site with a focus on laser-driven plasma acceleration (LWFA). User areas at both sites will provide access to free-electron laser pilot experiments, positron generation and acceleration, compact radiation sources, and test beams for high-energy physics detector development. Support centres in four different countries will complement the pan-European implementation of this infrastructure.

The EuPRAXIA project aims at designing the world's first accelerator based on advanced plasma-wakefield techniques to deliver 5 GeV electron beams that simultaneously have high charge, low emittance and low energy spread, which are required for applications by future user communities. Meeting this challenging objective will only be possible through dedicated effort. Many injection/acceleration schemes and techniques have been explored by means of thorough simulations in more than ten European research institutes. This enables selection of the most appropriate methods for solving each particular problem. The specific challenge of generating, extracting and transporting high charge beams, while maintaining the high quality needed for user applications, are being tackled using innovative approaches. This article highlights preliminary results obtained by the EuPRAXIA collaboration, which also exhibit the required laser and plasma parameters.

Undulator based synchrotron light sources and Free Electron Lasers (FELs) are valuable modern probes of matter with high temporal and spatial resolution. Laser Plasma Accelerators (LPAs), delivering GeV electron beams in few centimeters, are good candidates for future compact light sources. However the barriers set by the large energy spread, divergence and shot-to-shot fluctuations require a specific transport line, to shape the electron beam phase space for achieving ultrashort undulator synchrotron radiation suitable for users and even for achieving FEL amplification. Proof-of-principle LPA based undulator emission, with strong electron focusing or transport, does not yet exhibit the full specific radiation properties. We report on the generation of undulator radiation with an LPA beam based manipulation in a dedicated transport line with versatile properties. After evidencing the specific spatio-spectral signature, we tune the resonant wavelength within 200–300 nm by modification of the electron beam energy and the undulator field. We achieve a wavelength stability of 2.6%. We demonstrate that we can control the spatio-spectral purity and spectral brightness by reducing the energy range inside the chicane. We have also observed the second harmonic emission of the undulator.

Small gap wigglers become more and more attractive to produce high photon fluxes in the hard X-ray photon range. They use magnet blocks of high magnetization which resists much better to heating (baking, synchrotron radiation) than in the past, produce high magnetic field with numerous periods and are very compact. They also are a very good alternative to superconducting technology which requires special infrastructure, heavy maintenance and is not running cost free. SOLEIL, operating presently at 2.75 GeV has designed and built an in-vacuum wiggler of 38 periods of 50 mm producing 2.1 Tat a minimum gap of 5.5 mm to delivered photon beam between 20 keV and 50 keV. Already in operation, further improvements are presently in progress to push photons towards higher energy, in particular thanks to the operation at lower gap (4.5 mm). MAX IV and SOLEIL, in the frame of collaboration, ave built an upgraded version of the existing SOLEIL wiggler with the target to extend the spectral range at high energy (above 50 keV) but also at low energy (4 keV) with the same insertion device. The design of the existing magnetic system has been modified to reach 2.4 T at a minimum gap of 4.2 mm and includes taper operation to avoid undulator structure in the radiated spectrum at low energy.