Active control of dark long-lived excitonic states in molecular aggregates using local electric fields is a pivotal challenge for advancing nanoscale optoelectronics and quantum device engineering. This experimental study investigates the collective excitonic states in aggregates composed of radical chromophores. With the strong optical enhancement provided by tip-enhanced photoluminescence spectroscopy, we observe fingerprints of bright and dark excitonic modes appearing due to interexciton coupling and induced changes in their spectra with the electric field locally applied within the nanocavity gap. The analysis of the Stark shifts revealed a divergent behavior of the bright states in asymmetric measurement positions of the nanocavity above the aggregates. The observed complex behavior is discussed considering the influence of the field, molecule arrangement, nanocavity coupling, and electrostatic charge inhomogeneities in the clusters. This sensitivity to the external parameters demonstrates an effective means of control over radical excitonic aggregates.
The vibrational landscape of adsorbed molecules is central to understanding surface interactions at the atomic scale, influencing phenomena from catalysis to molecular electronics. Recent advances in atomic-scale tip-enhanced Raman spectroscopy (TERS) have enabled vibrational mapping of single molecules with subnanometer spatial resolution, providing unprecedented insights into molecule-surface interactions by confining light in plasmonic picocavities. Here, we exploit TERS in a cryogenic scanning tunneling microscope junction to perform Raman hyperspectral mapping of single iron phthalocyanine (FePc) molecules in three nonequivalent adsorption configurations on Ag surfaces. We explore the changes in the vibrational modes of FePc molecules adsorbed on two distinct silver crystal terminations with differing symmetry, Ag(111) and Ag(110), revealing how subtle variations in the adsorption geometry due to substrate anisotropy can strongly influence molecular vibrations, lifting the degeneracy of individual normal modes. Our findings not only demonstrate the first use of subnanometer TERS mapping across different symmetry configurations but also provide a deeper understanding of how site-specific vibrational properties are intimately linked to local atomic environments. This capability paves the way for precisely tailoring surface interactions and controlling chemical reactions on the atomic scale.
Quantification of electrostatic potentials at the nanoscale is crucial for understanding the principles governing properties of materials across multiple length scales. Currently, one of the most successful approaches relies on the charging response of a molecular quantum dot, suspended on a tip of a scanning probe microscope and measured using dynamic force spectroscopy. We investigate the possibility of an optical detection, aiming to improve the speed and reduce the complexity of this measurement scheme. We show that the integrated tip-enhanced Raman scattering intensity strongly correlates with the charge state of the quantum dot, and use it to map the electrostatic potential of a single atom. A quantitative equivalence with the established force spectroscopy method is found. We address the underlying photophysical principle of this new method by measuring the Raman spectra as a function of excitation wavelength and the molecular quantum dot charge. We reveal that the observed Raman intensity variations are primarily driven by transitions between resonant and non-resonant Raman scattering regimes of the molecule.
We build and commission a time-of-flight photon spectrometer (TOFS) for scanning tunneling microscopy luminescence (STML). We obtain the spectrum by exploiting the wavelength dependent refractive index of a long dispersive optical fiber that converts photon arrival times into wavelength information; blue photons are delayed more than red photons. The setup uses a pulsed excitation source, either laser flashes or voltage pulses, to launch the photons from the junction into a single photon detector. The TOFS calibration can be performed and transferred to the STML setup from a separate benchtop experiment using pulsed light sources with known wavelength. We verify the TOFS during STML operation by simultaneously recording luminescence from the Ag-Ag(111) plasmon using a conventional grating spectrometer. Our experiments show that the TOFS is a straightforward and cost-effective addition to existing STML setups with good performance in the near-infrared range. The TOFS is compatible with a drop-in replacement of the single photon detector such as a superconducting nanowire single photon detector or even bolometers that may expand the useful spectral range beyond the abilities of current STML setups.
Triggered by the development of exfoliation and the identification of a wide range of extraordinary physical properties in self-standing films consisting of one or few atomic layers, two-dimensional (2D) materials such as graphene, transition metal dichalcogenides (TMDs), and other van der Waals (vdW) crystals currently constitute a wide research field protruding in multiple directions in combination with layer stacking and twisting, nanofabrication, surface-science methods, and integration into nanostructured environments. Photonics encompasses a multidisciplinary collection of those directions, where 2D materials contribute with polaritons of unique characteristics such as strong spatial confinement, large optical-field enhancement, long lifetimes, high sensitivity to external stimuli (e.g., electric and magnetic fields, heating, and strain), a broad spectral range from the far infrared to the ultraviolet, and hybridization with spin and momentum textures of electronic band structures. The explosion of photonics with 2D materials as a vibrant research area is producing breakthroughs, including the discovery and design of new materials and metasurfaces with unprecedented properties as well as applications in integrated photonics, light emission, optical sensing, and exciting prospects for applications in quantum information, and nanoscale thermal transport. This Roadmap summarizes the state of the art in the field, identifies challenges and opportunities, and discusses future goals and how to meet them through a wide collection of topical sections prepared by leading practitioners.
Studying the excited states of doublets is challenging for their typically multiconfigurational character. We employ light-scanning-tunneling microscopy (light-STM) to investigate photon-induced currents on a single open-shell PTCDA anion molecule placed into a plasmonic nanocavity between a tip and a substrate, irradiated by laser. Submolecular mapping reveals a zero-bias bidirectional photocurrent strongly varying with the lateral position of the tip apex above the molecule. We elucidate the mechanism in terms of a theoretical model in which a multiconfigurational doublet state is excited and decays back to the anion ground state through sequential electron transfers with the tip and the substrate. The correspondence of the experimental and theoretical contrast proves the correlated character of the excited state which can be described as a superposition of two dominating electronic configurations. By applying bipolar voltage on the junction with the molecule, we switch the dominant recombination pathway from one of the configurations to the other, effectively disentangling the multiconfigurational state individual components through visualization of their Dyson orbitals, as corroborated by theoretical modelling.
Molecular radicals are efficient electroluminescent emitters due to the spin multiplicity of their electronic states. The excited states often exhibit a complex composition with multiple significant electronic configurations, which are essential for their optoelectronic properties but difficult to probe directly. Here we use light-scanning tunneling microscopy to investigate such an excited state by visualizing the response of a single radical molecule to a laser excitation. We observe characteristic atomic-scale spatial photocurrent patterns that can be tuned by applied bias voltage. We interpret these patterns as resulting from decay of an excited doublet state through sequential electron transfers with the tip and the substrate. The relative contributions of two dominating electronic configurations involved in this excited state are tuned by the applied voltage. This approach thus allows for disentangling the components of multiconfigurational excited states in single molecules.
Tip-enhanced Raman spectroscopy (TERS) under ultrahigh vacuum and cryogenic conditions enables exploration of the relations between the adsorption geometry, electronic state, and vibrational fingerprints of individual molecules. TERS capability of reflecting spin states in open-shell molecular configurations is yet unexplored. Here, we use the tip of a scanning probe microscope to lift a perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA) molecule from a metal surface to bring it into an open-shell spin one-half anionic state. We reveal a correlation between the appearance of a Kondo resonance in differential conductance spectroscopy and concurrent characteristic changes captured by the TERS measurements. Through a detailed investigation of various adsorbed and tip-contacted PTCDA scenarios, we infer that the Raman scattering on suspended PTCDA is resonant with a higher excited state. Theoretical simulation of the vibrational spectra enables a precise assignment of the individual TERS peaks to high-symmetry Ag modes, including the fingerprints of the observed spin state. These findings highlight the potential of TERS in capturing complex interactions between charge, spin, and photophysical properties in nanoscale molecular systems and suggest a pathway for designing single-molecule spin-optical devices.
Spontaneous fluorescence rates of single-molecule emitters are typically on the order of nanoseconds. However, coupling them with plasmonic nanostructures can substantially increase their fluorescence yields. The confinement between a tip and sample in a scanning tunneling microscope creates a tunable nanocavity, an ideal platform for exploring the yields and excitation decay rates of single-molecule emitters, depending on their coupling strength to the nanocavity. With such a setup, we determine the excitation lifetimes from the direct time-resolved measurements of phthalocyanine fluorescence decays, decoupled from the metal substrates by ultrathin NaCl layers. We find that when the tip is approached to single molecules, their lifetimes are reduced to the picosecond range due to the effect of coupling with the tip-sample nanocavity. On the other hand, ensembles of the adsorbed molecules measured without the nanocavity manifest nanosecond-range lifetimes. This approach overcomes the drawbacks associated with the estimation of lifetimes for single molecules from their respective emission line widths.
Precise control of multiple spin states on the atomic scale presents a promising avenue for designing and realizing magnetic switches. Despite substantial progress in recent decades, the challenge of achieving control over multiconfigurational reversible switches in low-dimensional nanostructures persists. Our work demonstrates multiple, fully reversible plasmon-driven spin-crossover switches in a single π-d metal-organic chain suspended between two electrodes. The plasmonic nanocavity stimulated by external visible light allows for reversible spin crossover between low- and high-spin states of different cobalt centers within the chain. We show that the distinct spin configurations remain stable for minutes under cryogenic conditions and can be nonperturbatively detected by conductance measurements. This multiconfigurational plasmon-driven spin-crossover demonstration extends the available toolset for designing optoelectrical molecular devices based on SCO compounds.
Molecule-based functional devices may take advantage of surface-mediated spin state bistability. Whereas different spin states in conventional spin crossover complexes are only accessible at temperatures well below room temperature, and the lifetimes of the high-spin state are relatively short, a different behavior exhibited by prototypical nickel phthalocyanine is shown here. Direct interaction of the organometallic complex with a copper metal electrode mediates the coexistence of a high spin and a low spin state within the 2D molecular array. The spin state bistability is extremely non-volatile, since no external stimuli are required to preserve it. It originates from the surface-induced axial displacement of the functional nickel cores, which generates two stable local minima. Spin state unlocking and the full conversion to the low spin state are only possible by a high temperature stimulus. This spin state transition is accompanied by distinct changes in the molecular electronic structure that might facilitate the state readout at room temperature, as evidenced by valence spectroscopy. The non-volatility of the high spin state up to elevated temperatures and the controllable spin bistability render the system extremely intriguing for applications in molecule-based information storage devices.
Single-molecule tip-enhanced Raman spectroscopy (TERS) under ultra-high vacuum (UHV) and cryogenic conditions enables exploration of the relations between the adsorption geometry, electronic state, and vibrational fingerprints of individual molecules. TERS capability of reflecting spin states in open-shell molecular configurations is yet unexplored. Here we use the tip of a scanning probe microscope to lift a perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA) molecule from a metal surface to bring it into an open-shell spin one-half anionic state. We reveal a correlation between the appearance of a Kondo resonance in the differential conductance spectroscopy and concurrent characteristic changes captured by the TERS measurements. Through a detailed investigation of various adsorbed and tip-contacted PTCDA scenarios, we infer that the Raman scattering on the suspended PTCDA is resonant with a higher excited state. Theoretical simulation of the vibrational spectra enables a precise assignment of the individual TERS peaks to high-symmetry Ag modes, including the fingerprints of the observed spin state. These findings highlight the potential of TERS in capturing complex interactions between charge, spin, and photophysical properties in nanoscale molecular systems, and suggest a pathway for designing spin-optical devices using organic molecules.
Abstract Hematite is a common iron oxide found in nature, and the α‐Fe2O3(0001) plane is prevalent on the nanomaterial utilized in photo‐ and electrocatalytic applications. The atomic‐scale structure of the surface remains controversial despite decades of study, partly because it depends on sample history as well as the preparation conditions. Here, a comprehensive study is performed using an arsenal of surface techniques (non‐contact atomic force microscopy, scanning tunneling microscopy, low‐energy electron diffraction, and X‐ray photoemission spectroscopy) complemented by analyses of the near surface region by high‐resolution transmission electron microscopy and electron energy loss spectroscopy. The results show that the so‐called “bi‐phase” termination forms even under highly oxidizing conditions; a (1 × 1) surface is only observed in the presence of impurities. Furthermore, it is shown that the biphase is actually a continuous layer distorted due to a mismatch with the subsurface layers, and thus not the proposed mixture of FeO(111) and α‐Fe2O3(0001) phases. Overall, the results show how combining surface and cross‐sectional imaging provides a full view that can be essential for understanding the role of the near‐surface region on oxide surface properties.
Hematite α-Fe_2O_3(0001) is the most-investigated iron oxide model system in photo and electrocatalytic research. The rich chemistry of Fe and O allows for many bulk and surface transformations, but their control is challenging. This has led to controversies regarding the structure of the topmost layers. This comprehensive study combines surface methods (nc-AFM, STM, LEED, and XPS) complemented by structural and chemical analysis of the near-surface bulk (HRTEM and EELS). The results show that a compact 2D layer constitutes the topmost surface of α-Fe_2O_3(0001); it is locally corrugated due to the mismatch with the bulk. Assessing the influence of naturally-occurring impurities shows that these can force the formation of surface phases that are not stable on pure samples. Impurities can also cause the formation of ill-defined inclusions in the subsurface and modify the oxidation phase diagram of hematite. The results provide a significant step forward in determining the hematite surface structure that is crucial for accurately modeling catalytic reactions. Combining surface and cross-sectional imaging provided the full view that is essential for understanding the evolution of the near-surface region of oxide surfaces under oxidative conditions.
One-dimensional metal-organic chains often possess a complex magnetic structure susceptible to modification by alteration of their chemical composition. The possibility to tune their magnetic properties provides an interesting playground to explore quasi-particle interactions in low-dimensional systems. Despite the great effort invested so far, a detailed understanding of the interactions governing the electronic and magnetic properties of the low-dimensional systems is still incomplete. One of the reasons is the limited ability to characterize their magnetic properties at the atomic scale. Here, we provide a comprehensive study of the magnetic properties of metal-organic one-dimensional (1D) coordination polymers consisting of 2,5-diamino-1,4-benzoquinonediimine ligands coordinated with Co or Cr atoms synthesized under ultrahigh-vacuum conditions on a Au(111) surface. A combination of integral X-ray spectroscopy with local-probe inelastic electron tunneling spectroscopy corroborated by multiplet analysis, density functional theory, and inelastic electron tunneling simulations enables us to obtain essential information about their magnetic structures, including the spin magnitude and orientation at the magnetic atoms, as well as the magnetic anisotropy.
Interplay between motion of nuclei and excitations has an important role in molecular photophysics of natural and artificial structures. Here we provide a detailed analysis of coupling between quantized librational modes (librons) and charged excited states (trions) on single phthalocyanine dyes adsorbed on a surface. By means of tip-induced electroluminescence performed with a scanning probe microscope, we identify libronic signatures in spectra of chirally adsorbed phthalocyanines and find that these signatures are absent from spectra of symmetrically adsorbed species. We create a model of the libronic coupling based on the Franck-Condon principle to simulate the spectral features. Experimentally measured librational spectra match very well the theoretically calculated librational eigenenergies and peak intensities (Franck-Condon factors). Moreover, the comparison reveals an unexpected depopulation channel for the zero libron of the excited state that can be effectively controlled by tuning the size of the nanocavity. Our results showcase the possibility of characterizing the dynamics of molecules by their low-energy molecular modes using µeV-resolved tip-enhanced spectroscopy.
Scanning tunneling and atomic force microscopies (STM/nc-AFM) are rapidly progressing to offer unprecedented spatial resolution of a diverse array of chemical species. In particular, they are employed to characterize on-surface chemical reactions by directly examining precursors and products. Chiral effects and self-assembled structures can also be investigated. This open source, modular, python based scheme automates the categorization of a variety of molecules present in medium sized (10×10 to 100×100 nm) scanned probe images.
Constant amplitude bias modulation over a broad range of microwave frequencies is a prerequisite for application in high-resolution spectroscopic techniques in a tunnel junction, e.g., electron spin resonance spectroscopy or optically detected paramagnetic resonance. Here, we present an optical method for determining the frequency-dependent magnitude of the transfer function of a dedicated high-frequency line integrated with a scanning probe microscope. The method relies on determining the energy cutoff of the plasmonic electroluminescence spectrum, which is linked to the energies of the electrons inelastically tunneling across the junction. We develop an easy-to-implement procedure for effective compensation of an radio frequency line and determination of the transfer function magnitude in the GHz range. We compare our method with conventional fully electronic calibration and find a perfect agreement.
Unlike intrinsically conductive organic polymers, which are central to organic electronics/photovoltaics, metallopolymers contain multiple redox‐active centers allowing extra control of their intriguing properties. Ferrocene polymers are particularly attractive in this regard, but research of the iconic poly(1,1′‐ferrocenylene), a main‐chain ferrocene polymer with the most densely bound redox‐active iron centers, has practically stopped because it is an insoluble and rather inhomogeneous material. Herein, its synthesis on the Ag(111) surface is reported, based on the Ullmann coupling of 1′,1″′‐diiodo‐1,1″‐biferrocene. Conformationally flexible single‐chain nanowires up to 50 nm in length, thus overcoming the limits of conventional solution polymerization, are characterized by scanning probe microscopy techniques achieving atomic resolution. Single‐chain electrical conductivity measurements are performed in the longitudinal directions revealing apparent metal‐to‐semiconductor transition (depending on the number of ferrocene units lifted from the surface). A simple transport model is established to rationalize this observation.
In hydrogen-bonded systems, nuclear quantum effects such as zero-point motion and tunneling can significantly affect their material properties through underlying physical and chemical processes. Presently, direct observation of the influence of nuclear quantum effects on the strength of hydrogen bonds with resulting structural and electronic implications remains elusive, leaving opportunities for deeper understanding to harness their fascinating properties. We studied hydrogen-bonded one-dimensional quinonediimine molecular networks which may adopt two isomeric electronic configurations via proton transfer. Herein, we demonstrate that concerted proton transfer promotes a delocalization of π-electrons along the molecular chain, which enhances the cohesive energy between molecular units, increasing the mechanical stability of the chain and giving rise to distinctive electronic in-gap states localized at the ends. These findings demonstrate the identification of a class of isomeric hydrogen-bonded molecular systems where nuclear quantum effects play a dominant role in establishing their chemical and physical properties. This identification is a step toward the control of mechanical and electronic properties of low-dimensional molecular materials via concerted proton tunneling.