Molybdenum-dependent formate dehydrogenases (Mo-FDHs) reversibly catalyze the interconversion of CO2 and formate, and therefore may be utilized for the development of innovative energy storage and CO2 utilization concepts. Mo-FDHs contain a highly conserved lysine residue in the vicinity of a catalytically active molybdenum (Mo) cofactor and an electron-transferring [4Fe-4S] cluster. In order to elucidate the function of the conserved lysine, we substituted the residue Lys44 of Escherichia coli formate dehydrogenase H (EcFDH-H) with structurally and chemically diverse amino acids. Enzyme kinetic analysis of the purified EcFDH-H variants revealed the Lys-to-Arg substitution as the only amino acid exchange that retained formate oxidation catalytic activity, amounting to 7.1% of the wild-type level. Ultraviolet-visible (UV-Vis) spectroscopic analysis indicated that >90% of the [4Fe-4S] cluster was lost in the case of EcFDH-H variants -K44E and -K44M, whereas the cluster occupancy of the K44R variant decreased by merely 4.5%. Furthermore, the K44R substitution resulted in a slight decrease in its melting temperature and a significant formate affinity decrease, apparent as a 32-fold Km value increase. Consistent with these findings, molecular dynamics simulations predicted an increase in the backbone and cofactor mobility as a result of the K44R substitution. These results are consistent with the conserved lysine being essential for stabilizing the catalytically active structures in EcFDH-H and may support engineering efforts on Mo-FDHs to design more efficient biocatalysts for CO2 reduction.

Staphylococcus aureus (S. aureus) is one of the bacterial species capable of forming multilayered biofilms on implants. Such biofilms formed on implanted medical devices often require the removal of the implant in order to avoid sepsis or, in the worst case, even the death of the patient. To address the problem of unwanted S. aureus biofilm formation, its first step, i.e., adhesion, must be understood and prevented. Thus, the development of adhesion-reducing surface coatings for implant materials is of utmost importance. In this work, we used single-cell force spectroscopy to analyze the adhesion of the biofilm-forming S. aureus strain SA113 on naive and protein-coated silicon surfaces (SiO2). In addition to the wild type, we used the SA113 ΔdltA knockout mutant to further investigate the effect of d-alanylation of lipoteichoic acids of the cell wall. In order to examine how the surface charge affects adhesion, we coated silanized SiO2 surfaces with amphiphilic class II hydrophobins. The naturally occurring hydrophobin HFBI was used as well as the HFBI variant D40Q/D43N, which is less negatively charged at physiological pH due to the exchange of two acidic aspartate residues. These two types of hydrophobin-coated surfaces resemble each other in roughness and wettability but differ only in charge. By measurement of the forces with which each S. aureus strain binds to hydrophobin-coated surfaces, we show that the adhesion of S. aureus at surfaces can be influenced by the charges exposed by the target surfaces. Therefore, in addition to hydrogen bonding, electrostatic interactions between the cell and the hydrophilic surface govern adhesion on these surfaces. Moreover, we found that for both HFBI coatings, the adhesion strength of S. aureus is reduced by nearly a factor of 30 compared to silanized SiO2 surfaces. Therefore, hydrophobin coatings are of great interest for further use in the field of biomedical surface coating.

ABSTRACT Enzyme engineering is a powerful tool for improving or altering the properties of biocatalysts for industrial, research, and therapeutic applications. Fast and accurate screening of variant libraries is often the bottleneck of enzyme engineering and may be overcome by growth-based screening strategies with simple processes to enable high throughput. The currently available growth-based screening strategies have been widely employed for enzymes but not yet for catalytically potent and oxygen-sensitive metalloenzymes. Here, we present a screening system that couples the activity of an oxygen-sensitive formate dehydrogenase to the growth of Escherichia coli . This system relies on the complementation of the E. coli formate hydrogenlyase (FHL) complex by Mo-dependent formate dehydrogenase H ( Ec FDH-H). Using an Ec FDH-H-deficient strain, we demonstrate that growth inhibition by acidic glucose fermentation products can be alleviated by FHL complementation. This allows the identification of catalytically active Ec FDH-H variants at a readily measurable cell density readout, reduced handling efforts, and a low risk of oxygen contamination. Furthermore, a good correlation between cell density and formate oxidation activity was established using Ec FDH-H variants with variable catalytic activities. As proof of concept, the growth assay was employed to screen a library of 1,032 Ec FDH-H variants and reduced the library size to 96 clones. During the subsequent colorimetric screening of these clones, the variant A12G exhibiting an 82.4% enhanced formate oxidation rate was identified. Since many metal-dependent formate dehydrogenases and hydrogenases form functional complexes resembling E. coli FHL, the demonstrated growth-based screening strategy may be adapted to components of such electron-transferring complexes. IMPORTANCE Oxygen-sensitive metalloenzymes are highly potent catalysts that allow the reduction of chemically inert substrates such as CO 2 and N 2 at ambient pressure and temperature and have, therefore, been considered for the sustainable production of biofuels and commodity chemicals such as ammonia, formic acid, and glycine. A proven method to optimize natural enzymes for such applications is enzyme engineering using high-throughput variant library screening. However, most screening methods are incompatible with the oxygen sensitivity of these metalloenzymes and thereby limit their relevance for the development of biosynthetic production processes. A microtiter plate-based assay was developed for the screening of metal-dependent formate dehydrogenase that links the activity of the tested enzyme variant to the growth of the anaerobically grown host cell. The presented work extends the application range of growth-based screening to metalloenzymes and is thereby expected to advance their adoption to biosynthesis applications.

This study evaluated the nutritional quality of different microbial biomass samples by assessing their protein digestibility and carbohydrate fermentability in the colon using in vitro methods. Four microbial samples were produced: one hydrogen-oxidizing bacterial strain (Nocardioides nitrophenolicus KGS-27), two strains of filamentous fungi (Rhizopus oligosporus and Paecilomyces variotii), and one yeast strain (Rhodotorula babjevae). The microorganisms were grown in bioreactors, harvested and dried before analysis. The commercial fungal product Quorn was used as a reference. The protein digestibility of the microbial samples was analysed using the INFOGEST in vitro model, followed by quantification of N-terminal amine groups. An in vitro faecal fermentation experiment was also performed to evaluate the degradation of carbohydrates in microbial biomass samples and formation of short-chain fatty acids (SCFA). The fungal biomass samples had higher protein hydrolysis (60-75 %) than the bacterial sample (12 %) and Quorn (45 %), while the yeast biomass had the highest protein digestibility (85 %). Heat-treatment of the biomass significantly reduced its protein digestibility. Total dietary fibre (DF) content of fungal biomass was 31 - 43 %(DW), mostly insoluble, whereas the bacterial biomass contained mainly soluble DF (total DF: 25.7 %, of which 23.5 % were soluble and 2.2 % insoluble). After 24 h of colonic in vitro fermentation, SCFA production from the biomass of Paecilomyces, Quorn and Rhodotorula was similar to that of wheat bran, while 17 % and 32 % less SCFA were produced from the biomass of Rhizopus and the bacterial strain, respectively. Further studies are needed to clarify the reasons for the observed differences in protein digestibility and DF fermentability, especially regarding the cell wall structures and role of post-processing.

One of the most important properties of membranes is their permeability to water and other small molecules. A targeted change in permeability allows the passage of molecules to be controlled. Vesicles made of membranes with low water permeability are preferable for drug delivery, for example, because they are more stable and maintain the drug concentration inside. This study reports on the very low water permeability of pure protein membranes composed of a bilayer of the amphiphilic protein hydrophobin HFBI. Using a droplet interface bilayer setup, we demonstrate that HFBI bilayers are essentially impermeable to water. HFBI bilayers withstand far larger osmotic pressures than lipid membranes. Only by disturbing the packing of the proteins in the HFBI bilayer is a measurable water permeability induced. To investigate possible molecular mechanisms causing the near-zero permeability, we used all-atom molecular dynamics simulations of various HFBI bilayer models. The simulations suggest that the experimental HFBI bilayer permeability is compatible neither with a lateral honeycomb structure, as found for HFBI monolayers, nor with a residual oil layer within the bilayer or with a disordered lateral packing similar to the packing in lipid bilayers. These results suggest that the low permeabilities of HFBI and lipid bilayers rely on different mechanisms. With their extremely low but adaptable permeability and high stability, HFBI membranes could be used as an osmotic pressure-insensitive barrier in situations where lipid membranes fail such as desalination membranes.

Metal-dependent formate dehydrogenases (Me-FDHs) are highly active CO2-reducing enzymes operating at low redox potentials and employ either molybdenum or tungsten to reduce the bound substrate. This makes them suitable for electrochemical applications such as fossil-free production of commodity chemicals utilizing renewable energy. Electrocatalytic CO2 reduction by cathode-immobilized Me-FDHs has been recently demonstrated and rational protein engineering can be used to optimize Me-FDHs for various carbon reduction reactions. In the present study, CO2 reduction by soluble monomeric Escherichia coli formate dehydrogenase H (EcFDH-H) was demonstrated and the function of its nucleophilic selenocysteine residue as a transient ligand of a centrally bound molybdenum atom was investigated. Kinetic analysis of the wildtype enzyme revealed maximum CO2 reduction rates of 44 ± 6 s−1 at pH 5.8 that was decreased to 19% and 0% in the case of selenocysteine substitution with the structural homologues cysteine and serine, respectively. Further selenocysteine-to-cysteine substitution effects included an increased acid tolerance as well as stronger inhibition by nitrate and azide indicating a shift of the Mo oxidation state from IV to VI. Conversely, a destabilizing effect on the oxidized Mo(VI) center could be assigned to the native selenocysteine residue that may facilitate the observed efficient CO2 reduction by rapid transition between Mo oxidation states. Taken together, the performed characterization of EcFDH-H as a catalyst for CO2 reduction and the selenocysteine substitution analysis furthers the understanding of the active-site structure of Me-FDHs and thereby supports the development of more efficient biocatalysts for CO2 reduction.

Hydrogen oxidizing autotrophic bacteria are promising hosts for conversion of CO2 into chemicals. In this work, we engineered the metabolically versatile lithoautotrophic bacterium R. opacus strain DSM 43205 for synthesis of polymer precursors. Aspartate decarboxylase (panD) or lactate dehydrogenase (ldh) were expressed for beta-alanine or L-lactic acid production, respectively. The heterotrophic cultivations on glucose produced 25 mg L−1 beta-alanine and 742 mg L−1 L-lactic acid, while autotrophic cultivations with CO2, H2, and O2 resulted in the production of 1.8 mg L−1 beta-alanine and 146 mg L−1 L-lactic acid. Beta-alanine was also produced at 345 μg L−1 from CO2 in electrobioreactors, where H2 and O2 were provided by water electrolysis. This work demonstrates that R. opacus DSM 43205 can be engineered to produce chemicals from CO2 and provides a base for its further metabolic engineering.

The production of edible microbial biomass in bioreactors is an attractive alternative to agriculture, which is a major consumer of fresh water, an emitter of greenhouse gases, and a cause of eutrophication. This study examines microbial food production by gas fermentation of two endotoxin-free Gram-positive H-2-oxidizing autotrophic bacterial strains, Nocardioides nitrophenolicus KGS-27 and Rhodococcus opacus DSM 43205. The supply of the gaseous substrates H-2 and O-2 by in situ water electrolysis was investigated as an alternative to providing them from an external source. N. nitrophenolicus KGS-27 produced <= 9.9 +/- 2.0 mg of biomass L-1 h(-1) and was not affected by in situ water electrolysis, which potentially produces growth-inhibiting reactive oxygen species. With R. opacus DSM 43205, in turn, electrolysis slowed growth considerably and resulted in a volumetric productivity of 2.6 +/- 0.8 mg of biomass L-1 h(-1), which was a quarter of what was obtained with the gases supplied externally. The macromolecular compositions of biomasses produced by the two cultivation modes using the two bacterial strains were rather similar containing approximately 33-37% protein, 28-56% carbohydrates, and 4-5% fatty acids of the cell dry weight. Relatively high protein concentrations and balanced amino acid profiles, comparable to those of casein and soy protein, were achieved with both strains.

Recent advances in enzymatic electrosynthesis of desired chemicals in biological-inorganic hybrid systems has generated interest because it can use renewable energy inputs and employs highly specific catalysts that are active at ambient conditions. However, the development of such innovative processes is currently limited by a deficient understanding of the molecular mechanisms involved in electrode-based electron transfer and biocatalysis. Mechanistic studies of non-electrosynthetic electron transferring proteins have provided a fundamental understanding of the processes that take place during enzymatic electrosynthesis. Thus, they may help explain how redox proteins stringently control the reduction potential of the transferred electron and efficiently transfer it to a specific electron acceptor. The redox sites at which electron donor oxidation and electron acceptor reduction take place are typically located in distant regions of the redox protein complex and are electrically connected by an array of closely spaced cofactors. These groups function as electron relay centers and are shielded from the surrounding environment by the electrically insulating apoporotein. In this matrix, electrons travel via electron tunneling, i.e. hopping between neighboring cofactors, over impressive distances of upto several nanometers and, as in the case of the Shewanella oneidensis Mtr electron conduit, traverse the bacterial cell wall to extracellular electron acceptors such as solid ferrihydrite. Here, the biochemical strategies of protein-based electron transfer are presented in order to provide a basis for future studies on the basis of which a more comprehensive understanding of the structural biology of enzymatic electrosynthesis may be attained.

This study evaluates the techno-economic feasibility of five solar-powered concepts for the production of autotrophic microorganisms for food and feed production; the main focus is on three concepts based on hydrogen-oxidizing bacteria (HOB), which are further compared to two microalgae-related concepts. Two locations with markedly different solar conditions are considered (Finland and Morocco), in which Morocco was found to be the most economically competitive for the cultivation of microalgae in open ponds and closed systems (1.4 and 1.9 € kg–1, respectively). Biomass production by combined water electrolysis and HOB cultivation results in higher costs for all three considered concepts. Among these, the lowest production cost of 5.3 € kg–1 is associated with grid-assisted electricity use in Finland, while the highest production cost of >9.1 € kg–1 is determined for concepts using solely photovoltaics and/or photoelectrochemical technology for on-site electricity production and solar-energy conversion to H2 by water electrolysis. All assessed concepts are capital intensive. Furthermore, a sensitivity analysis suggests that the production costs of HOB biomass can be lowered down to 2.1 € kg–1 by optimization of the process parameters among which volumetric productivity, electricity strategy, and electricity costs have the highest cost-saving potentials. The study reveals that continuously available electricity and H2 supply are essential for the development of a viable HOB concept due to the capital intensity of the needed technologies. In addition, volumetric productivity is the key parameter that needs to be optimized to increase the economic competitiveness of HOB production.

Hydrogen-oxidizing bacteria (HOB) have been shown to be promising micro-organisms for the reduction of carbon dioxide to a wide range of value-added products in bioelectrochemical systems with in situ water electrolysis of the cultivation medium, also known as a hybrid biological-inorganic systems (HBI). However, scaling up of this process requires overcoming the inherent constraints of the low energy efficiency partly associated with the pH-neutral electrolyte with low conductivity. Most of the research in the field is concentrated on the bacterial cultivation, whereas the analysis and evaluation of the electrode material performance have received little attention in the literature so far. Therefore, in the present work, in situ electrolysis of a pH-neutral medium for HOB cultivation was performed with different combinations of electrode materials. Besides conventional electrode types, electrodes with coatings made of earth-abundant cobalt and a nickel-iron alloy, known for their catalytic activity for the kinetically sluggish oxygen evolution reaction (OER), were prepared and tested as potential substitutes for catalysts made of precious metals. The cultivation of HOB with in situ water electrolysis has been successfully tested in a small scale electrobioreactor in order to support the experimental results. A simplified water electrolysis model was developed and applied to evaluate the current-voltage characteristics of an bioelectrochemical system prototype. Application of the developed model allows quantitative evaluation and comparison of reversible, ohmic, and activation overvoltages of different electrode sets. The modeling results were found to agree well with the experimental data. The developed model and the data gathered can be applied to further investigation, simulation, and optimization of HBI systems.

Class II hydrophobins are amphiphilic proteins produced by filamentous fungi. One of their typical features is the tendency to accumulate at the interface between an aqueous phase and a hydrophobic phase, such as the air-water interface. The kinetics of the interfacial self-assembly of wild-type hydrophobins HFBI and HFBII and some of their engineered variants at the air-water interface were measured by monitoring the accumulated mass at the interface via nondestructive ellipsometry measurements. The resulting mass vs time curves revealed unusual kinetics for a monolayer formation that did not follow a typical Langmuir-type of behavior but had a rather coverage-independent rate instead. Typically, the full surface coverage was obtained at masses corresponding to a monolayer. The formation of multilayers was not observed. Atomic force microscopy revealed formation and growth of non-fusing protein clusters at the interface. The mechanism of the adsorption was studied by varying the structure or charges of the protein or the ionic strength of the subphase, revealing that the lateral interactions between the hydrophobins play a role in their interfacial assembly. Additionally, a theoretical model was introduced to identify the underlying mechanism of the unconventional adsorption kinetics.

Biosensors detect signals using biological sensing components such as redox enzymes and biological cells. Although cellular versatility can be beneficial for different applications, limited stability and efficiency in signal transduction at electrode surfaces represent a challenge. Recent studies have shown that the Mtr electron conduit from Shewanella oneidensis MR-1 can be produced in Escherichia coli to generate an exoelectrogenic model system with well-characterized genetic tools. However, means to specifically immobilize this organism at solid substrates as electroactive biofilms have not been tested previously. Here, we show that mannose-binding Fim pili can be produced in exoelectrogenic E.coli and can be used to selectively attach cells to a mannose-coated material. Importantly, cells expressing fim genes retained current production by the heterologous Mtr electron conduit. Our results demonstrate the versatility of the exoelectrogenic E.coli system and motivate future work that aims to produce patterned biofilms for bioelectronic devices that can respond to various biochemical signals.

Hydrophobins are a family of small-sized proteins featuring a distinct hydrophobic patch on the protein's surface, rendering them amphiphilic. This particularity allows hydrophobins to self-assemble into monolayers at any hydrophilic/hydrophobic interface. Moreover, stable pure protein bilayers can be created from two interfacial hydrophobin monolayers by contacting either their hydrophobic or their hydrophilic sides. In this study, this is achieved via a microfluidic approach, in which also the bilayers' adhesion energy can be determined. This enables us to study the origin of the adhesion of hydrophobic and hydrophilic core bilayers made from the class II hydrophobins HFBI and HFBII. Using different fluid media in this setup and introducing genetically modified variants of the HFBI molecule, the different force contributions to the adhesion of the bilayer sheets are studied. It was found that in the hydrophilic contact situation, the adhesive interaction was higher than that in the hydrophobic contact situation and could be even enhanced by reducing the contributions of electrostatic interactions. This effect indicates that the van der Waals interaction is the dominant contribution that explains the stability of the observed bilayers.

Electrosynthesis of formate is a promising technology to convert CO2 and electricity from renewable sources into a biocompatible, soluble, non-flammable, and easily storable compound. In the model methanogen Methanococcus maripaludis, uptake of cathodic electrons was shown to proceed indirectly via formation of formate or H-2 by undefined, cell-derived enzymes. Here, we identified that the multi-enzyme heterodisulfide reductase supercomplex (Hdr-SC) of M. maripaludis is capable of direct electron uptake and catalyzes rapid H-2 and formate formation in electrochemical reactors (-800 mV vs Ag/AgCl) and in Fe(0) corrosion assays. In Fe(0) corrosion assays and electrochemical reactors, purified Hdr-SC primarily catalyzed CO2 reduction to formate with a coulombic efficiency of 90% in the electrochemical cells for 5 days. Thus, this report identified the first enzyme that stably catalyzes the mediator-free electrochemical reduction of CO2 to formate, which can serve as the basis of an enzyme electrode for sustained electrochemical production of formate.

Hydrophobins are surface-active fungal proteins that adsorb to the water-air interface and self-assemble into amphiphilic, water-repelling films that have a surface elasticity that is an order of magnitude higher than other molecular films. Here we use surface-specific sum-frequency generation spectroscopy (VSFG) and site-directed mutagenesis to study the properties of class I hydrophobin (HFBI) films from Trichoderma reesei at the molecular level. We identify protein specific HFBI signals in the frequency region 1200-1700 cm-1 that have not been observed in previous VSFG studies on proteins. We find evidence that the aspartic acid residue (D30) next to the hydrophobic patch is involved in lateral intermolecular protein interactions, while the two aspartic acid residues (D40, D43) opposite to the hydrophobic patch are primarily interacting with the water solvent.

Pure protein bilayers and vesicles are formed using the native, fungal hydrophobin HFBI. Bilayers with hydrophobic (red) and hydrophilic (blue) core are produced and, depending on the type of core, vesicles in water, oily media, and even in air can be created using microfluidic jetting. Vesicles in water are even able to incorporate functional gramicidin A pores.