Spinal implants have been successfully used to treat various spine conditions. However, concerns remain regarding the release of ions and particles that can cause adverse host responses. Moreover, the biological response from cells of the central nervous system to implant wear particles is not well documented. This research studied the interaction of silicon nitride, cobalt oxide, or chromium oxide particles with relevant glial cells, astrocytes and microglia, to assess their effects on viability and activation using a range of relevant concentrations. Astrocyte viability was not impaired by the particles, and expression levels of the astrocyte reactivity markers GFAP and vimentin were unaffected following 24 h of exposure. Moreover, the particles did not alter microglial phagocytic activity, or stimulate the release of the inflammatory cytokines TNF-alpha and IL-6. Together, these results suggest that the release of such particles from a spinal implant would not induce an inflammatory response in surrounding glial cells. Interestingly, high concentrations of SiN particles reduced microglial cell viability, potentially due to their tendency to form large agglomerates and/or their high dissolution rate. The present work highlights the importance of studying the potential effects of SiN particles on glial cells and encourages further investigations to fully understand the safety aspects of the use of SiN in spinal implants.

With antibiotic resistance being a major global concern, there is a huge need of new treatment options to fight bacterial infections. In this study, we highlight the antibacterial and host-protective roles of a novel synthetic antimicrobial peptide in uropathogenic Escherichia coli–infected uroepithelial cells. This peptide, designed from a fragment of human cathelicidin LL-37 and named LD4-PP, was found to be highly potent against clinical isolates of E. coli as well as ESBL-producing and multi-drug resistant E. coli. Additionally, LD4-PP inhibited the formation of new biofilm, damaging both the bacterial surface and the bacterial genome. LD4-PP also modulated the host cell lipid vacuole, caveolin-1, and Rho GTPase B affecting bacterial survival. Furthermore, LD4-PP exerts immunomodulatory effects by modulating free radical formation, expression of antioxidants, and inflammasome-mediated cell death. Pronounced uroepithelial cell death was observed after E. coli infection which was significantly inhibited by LD4-PP without affecting the cellular toxicity. Overall, the peptide LD4-PP is shown to be a strong candidate for future clinical applications, particularly to prevent and treat urinary tract infections.

In the present work, we explored Lewis acid catalysis, via FeCl3, for the heterogeneous surface functionalization of cellulose nanofibrils (CNFs). This approach, characterized by its simplicity and efficiency, facilitates the amidation of nonactivated carboxylic acids in carboxymethylated cellulose nanofibrils (c-CNF). Following the optimization of reaction conditions, we successfully introduced amine-containing polymers, such as polyethylenimine and Jeffamine, onto nanofibers. This introduction significantly enhanced the physicochemical properties of the CNF-based materials, resulting in improved characteristics such as adhesiveness and thermal stability. Reaction mechanistic investigations suggested that endocyclic oxygen of cellulose finely stabilizes the transition state required for further functionalization. Notably, a nanocomposite, containing CNF and a branched low molecular weight polyethylenimine (CNF-PEI 800), was synthesized using the catalytic reaction. The composite CNF-PEI 800 was thoroughly characterized having in mind its potential application as coating biomaterial for medical implants. The resulting CNF-PEI 800 hydrogel exhibits adhesive properties, which complement the established antibacterial qualities of polyethylenimine. Furthermore, CNF-PEI 800 demonstrates its ability to support the proliferation and differentiation of primary human osteoblasts over a period of 7 days.

The application of urinary catheters is associated with pain and discomfort. Several topical medications are available to ease catheter insertion, including xylocaine. Here we report that xylocaine, although not classified as an antibacterial agent, has bacteriostatic properties against both Gram-positive and Gram-negative etiological agents of urinary tract infections (UTIs). Xylocaine reduces the amount of biofilm formed by ESBL- and non-ESBL-producing E. coli. In addition, xylocaine possesses slight immunomodulatory properties in uroepithelial cells, and treatment of uroepithelial cells prior to infection reduces bacterial loads in the supernatant. In conclusion, xylocaine has multifaceted positive effects when used during the insertion of urinary catheters.

ABSTRACT This is a quantitative methodological study for the validation of a research instrument. It aimed to validate the data from the TrackHealth accelerometry device. The sample consisted of 30 adult individuals of both sexes selected by convenience who met the inclusion and exclusion criteria. The physical activity monitors used for the research protocol were the ActiGraph® wGT3X-BT triaxial accelerometer and the TrackHealth accelerometer (TH). The activity protocol consisted of 4 (four) activities (walking at 4.8 and 6.4 km h1 and running at 9.7 and 12 km h1) performed in the laboratory, on an Ibramed treadmill, lasting 5 (five) minutes at each stage. A difference was found between the raw acceleration data of the two devices, however the TrackHealth device showed higher sensitivity at speeds of 4.8 and 6.4 km/h, and a high level of agreement (2.7-2.8%) at the initial speeds of the magnitude vectors. However, there is still a need for improvement in the functioning of the device, so that TrackHealth can be commercialized.

Nanocellulose–oligoproline hydrogels, able to respond to high levels of ROS and protect cells from oxidative environments, are promising candidates for the treatment of chronic wounds and other clinical conditions associated with high levels of ROS.

This work combines the wound-healing-related properties of the host defense peptide KR-12 with wood-derived cellulose nanofibrils (CNFs) to obtain bioactive materials, foreseen as a promising solution to treat chronic wounds. Amine coupling through carbodiimide chemistry, thiol-ene click chemistry, and Cu(I)-catalyzed azide-alkyne cycloaddition were investigated as methods to covalently immobilize KR-12 derivatives onto CNFs. The effects of different coupling chemistries on the bioactivity of the KR12-CNF conjugates were evaluated by assessing their antibacterial activities against Escherichia coli and Staphylococcus aureus. Potential cytotoxic effects and the capacity of the materials to modulate the inflammatory response of lipopolysaccharide (LPS)-stimulated RAW 245.6 macrophages were also investigated. The results show that KR-12 endowed CNFs with antibacterial activity against E. coli and exhibited anti-inflammatory properties and those conjugated by thiol-ene chemistry were the most bioactive. This finding is attributed to a favorable peptide conformation and accessibility (as shown by molecular dynamics simulations), driven by the selective chemistry and length of the linker in the conjugate. The results represent an advancement in the development of CNF-based materials for chronic wound care. This study provides new insights into the effect of the conjugation chemistry on the bioactivity of immobilized host defense peptides, which we believe to be of great value for the use of host defense peptides as therapeutic agents.

Dermal infections requiring treatment are usually treated with conventional antibiotics, but the rise of bacterial resistance to first-line antibiotics warrants alternative therapeutics. Here, we report that a backbone-cyclized antimicrobial peptide, CD4-PP, designed from the human host defense peptide LL-37, has strong direct antibacterial effects on antibiotic sensitive as well as resistant-type strains and clinical isolates of common skin pathogens in the low (<2) μM range. In addition, it influences innate immunity in keratinocytes, and treatment with CD4-PP is able to clear bacterial infections in infected keratinocytes. Additionally, CD4-PP treatment significantly reduces the wound area in a lawn of keratinocytes infected with MRSA. In conclusion, CD4-PP has the potential to serve as a future drug treating wounds infected with antibiotic-resistant bacteria.

The present work explored the use of the selective laser melting (SLM) technique to develop a Zr-based bulk metallic glass (BMG) and investigate the influence of the process parameters on obtaining different levels of surface roughness. Moreover, the potential of the additively manufactured BMG Zr59.3Cu28.8Al10.4Nb1.5 (trade name AMLOY-ZR01) as an implant material was studied by evaluating the osteoblastic cell response to the alloy and its stability under simulated biological environments. The materials were characterized in terms of degree of crystallinity, surface roughness, and morphology, followed by a systematic investigation of the response of the MC3T3-E1 preosteoblastic cell line to the as-printed samples. The materials supported cell proliferation and differentiation of the preosteoblastic cells, with results comparable to the reference material Ti-6Al-4V. The surface microroughness and surface morphology (porous or groove-type laser tracks) investigated in this study did not have a significant effect on modulating the cell response. Ion release experiments showed a large increase in ion release under inflammatory conditions as compared to regular physiological conditions, which could be attributed to the increased local corrosion under inflammatory conditions. The findings in this work showed that the surface roughness of the additively manufactured BMG AMLOY-ZR01 can be tailored by controlling the laser power applied during the SLM process. The favorable cell response to the as-printed AMLOY-ZR01 represents of a significant advancement of the investigation of additively manufactured BMGs for orthopedic applications, while the results of the ion release study highlights the effect that inflammatory conditions could have on the degradation of the alloy.

The increasing antibiotic resistance among uropathogenic bacteria warrants alternative therapeutic strategies. We demonstrate the potential of the synthetic peptide CD4-PP, designed by dimerization and backbone cyclization of the shortest antimicrobial region of human cathelicidin, LL-37. CD4-PP is active against clinical and type strains of common uropathogens Escherichia coli, Klebsiella pneumoniae, and Pseudomonas aeruginosa at concentrations substantially below cellular cytotoxic levels and induced membrane deformation and leakage in E. coli and P. aeruginosa. Furthermore, CD4-PP treatment prevented the formation of new biofilm and dissolved mature biofilm created by E. coli and P. aeruginosa and targeted curli amyloid in E. coli biofilms. In addition, CD4-PP also induced production of LL-37 by uroepithelial cells and increased the expression of tight junction proteins claudin-14 and occludin. During uroepithelial cell infection, CD4-PP significantly reduced uropathogen survival when treatment was given at the start of infection. Low micromolar of CD4-PP treatment initiated after 2 h was successful with all tested species, except P. aeruginosa where CD4-PP was unable to reduce survival, which could be attributed by early biofilm formation. Finally, we demonstrated that urinary catheter pieces coated with saline fluid supplemented with CD4-PP reduced the attachment of E. coli, giving it a potential clinical application.

There is currently a huge need for new, improved therapeutic approaches for the treatment of chronic wounds. One promising strategy is to develop wound dressings capable of modulating the chronic wound environment (e.g., by controlling the high levels of reactive oxygen species (ROS) and proteases). Here, we selected the thiol-containing amino acid cysteine to endow wood-derived cellulose nanofibrils (CNF) with bioactivity toward the modulation of ROS levels and protease activity. Cysteine was covalently incorporated into CNF and the functionalized material, herein referred as cys-CNF, was characterized in terms of chemical structure, degree of substitution, radical scavenging capacity, and inhibition of protease activity. The stability of the thiol groups was evaluated over time, and an in vitro cytotoxicity study with human dermal fibroblasts was performed to evaluate the safety profile of cys-CNF. Results showed that cys-CNF was able to efficiently control the activity of the metalloprotease collagenase and to inhibit the free radical DPPH (1,1-Diphenyl-2-picrylhydrazyl radical), activities that were correlated with the presence of free thiol groups on the nanofibers. The stability study showed that the reactivity of the thiol groups challenged the bioactivity over time. Nevertheless, preparing the material as an aerogel and storing it in an inert atmosphere were shown to be valid approaches to increase the stability of the thiol groups in cys-CNF. No signs of toxicity were observed on the dermal fibroblasts when exposed to cys-CNF (concentration range 0.1–0.5 mg/mL). The present work highlights cys-CNF as a promising novel material for the development of bioactive wound dressings for the treatment of chronic wounds.

Wood-derived nanofibrillated cellulose (NFC) has emerged as a sustainable material with a wide range of applications and increasing presence in the market. Surface charges are introduced during the preparation of NFC to facilitate the defibrillation process, which may also alter the toxicological properties of NFC. In the present study, we examined the in vitro toxicity of NFCs with five surface chemistries: nonfunctionalized, carboxymethylated, phosphorylated, sulfoethylated, and hydroxypropyltrimethylammonium-substituted. The NFC samples were characterized for surface functional group density, surface charge, and fiber morphology. Fibril aggregates predominated in the nonfunctionalized NFC, while individual nanofibrils were observed in the functionalized NFCs. Differences in surface group density among the functionalized NFCs were reflected in the fiber thickness of these samples. In human bronchial epithelial (BEAS-2B) cells, all NFCs showed low cytotoxicity (CellTiter-GloVR luminescent cell viability assay) which never exceeded 10% at any exposure time. None of the NFCs induced genotoxic effects, as evaluated by the alkaline comet assay and the cytokinesis-block micronucleus assay. The nonfunctionalized and carboxymethylated NFCs were able to increase intracellular reactive oxygen species (ROS) formation (chloromethyl derivative of 2′,7′-dichlorodihydrofluorescein diacetate assay). However, ROS induction did not result in increased DNA or chromosome damage.

Wood-derived nanofibrillated cellulose (NFC) has long been recognized as a valuable nanomaterial for food-related applications. However, the safety of NFC cannot be predicted just from the chemical nature of cellulose, and there is a need to establish the effect of the nanofibers on the gastrointestinal tract, to reassure the safe use of NFC in food-related products. The present work selected the intestinal cells Caco-2 and the gut bacteria Escherichia coli and Lactobacillus reuteri to evaluate the in vitro biological response to NFC. NFC materials with different surface modifications (carboxymethylation, hydroxypropyltrimethylammonium substitution, phosphorylation and sulfoethylation) and unmodified NFC were investigated. The materials were characterized in terms of surface functional group content, fiber morphology, zeta potential and degree of crystallinity. The Caco-2 cell response to the materials was evaluated by assessing metabolic activity and cell membrane integrity. The effects of the NFC materials on the model bacteria were evaluated by measuring bacterial growth (optical density at 600 nm) and by determining colony forming units counts after NFC exposure. Results showed no sign of cytotoxicity in Caco-2 cells exposed to the NFC materials, and NFC surface functionalization did not impact the cell response. Interestingly, a bacteriostatic effect on E. coli was observed while the materials did not affect the growth of L. reuteri. The present findings are foreseen to contribute to increase the knowledge about the potential oral toxicity of NFC and, in turn, add to the development of safe NFC-based food products.

Amorphous calcium phosphate (ACP) has shown significant effects on the biomineralization and promising applications in bio-medicine. However, the limited stability and porosity of ACP material restrict its practical applications. A storage stable highly porous ACP with Brunauer–Emmett–Teller surface area of over 400 m2/g was synthesized by introducing phosphoric acid to a methanol suspension containing amorphous calcium carbonate nanoparticles. Electron microscopy revealed that the porous ACP was constructed with aggregated ACP nanoparticles with dimensions of several nanometers. Large angle X-ray scattering revealed a short-range atomic order of <20 Å in the ACP nanoparticles. The synthesized ACP demonstrated long-term stability and did not crystallize even after storage for over 14 months in air. The stability of the ACP in water and an α-MEM cell culture medium were also examined. The stability of ACP could be tuned by adjusting its chemical composition. The ACP synthesized in this work was cytocompatible and acted as drug carriers for the bisphosphonate drug alendronate (AL) in vitro. AL-loaded ACP released ~25% of the loaded AL in the first 22 days. These properties make ACP a promising candidate material for potential application in biomedical fields such as drug delivery and bone healing.

Salicylic acid (SA) has for a long time been used to treat various skin disorders due to its anti-inflammatory, bacteriostatic, and antifungal properties. In the present work, mesoporous magnesium carbonate (MMC), a promising drug carrier, was modified with 3-aminopropyl-triethoxysilane to enable loading of SA. The amine modified MMC (aMMC) was successfully loaded with 8 wt.% of SA via a solvent evaporation method. SA was later completely released from the carrier in less than 15 min. Furthermore, the cytotoxicity of the functionalized material was evaluated. aMMC was found to be non-toxic for human dermal fibroblast cells with particle concentration of up to 1000 µg/mL when exposed for 48 h. The presented results form the basis of future development of aMMC as a potential carrier for SA in dermatological applications.

Studies on sedentary behavior (SB) among university students have been published, and the knowledge about the methods adopted in surveys is important for science, and the characterization of prevalence and associated factors are essential in the context of health policies for this population group. Thus, the aim of the present study was to describe prevalence, associated factors, and the methodological characteristics used in SB research among university students. A search in the National Library of Medicine (PUBMED), Scientific Electronic Library Online (SciELO), Virtual Health Library (VHL) and SCOPUS databases was performed. This study adopted the items and recommendations of the Preferred Reporting Items for Systematic Reviews and Meta-Analyzes (PRISMA), and the articles selected were analyzed according to their methodological characteristics, as well as prevalence and factors associated with SB. Of the 1,740 articles found in databases, 23 were included in this review. The prevalence for sitting time was from 34.0% to 90.2%. The use of operational definitions and cutoff points diversified, as well as the use of various instruments to estimate SB. The lack of standardization between cutoff points for SB determination and operational definitions, such as the use of non-validated instruments, was observed. Among factors associated with higher prevalence, the most prominent were overweight and depressive symptoms. It was concluded that the prevalence of SB was high in domains not related with the time devoted to studies and biological and psychological characteristics represented attributes more associated with SB.

Transparent composite hydrogel in the form of a contact lens made from poly(vinyl alcohol) (PVA) and cellulose nanocrystals (CNCs) was subjected to in vitro biocompatibility evaluation with human corneal epithelial cells (HCE-2 cells). The cell response to direct contact with the hydrogels was investigated by placing the samples on top of confluent cell layers and evaluating cell viability, morphology, and cell layer integrity subsequent to 24 h culture and removal of the hydrogels. To further characterize the lens–cell interactions, HCE-2 cells were seeded on the hydrogels, with and without simulated tear fluid (STF) pre-conditioning, and cell viability and morphology were evaluated. Furthermore, protein adsorption on the hydrogel surface was investigated by incubating the materials with STF, followed by protein elution and quantification. The hydrogel material was found to have affinity towards protein adsorption, most probably due to the interactions between the positively charged lysozyme and the negatively charged CNCs embedded in the PVA matrix. The direct contact experiment demonstrated that the physical presence of the lenses did not affect corneal epithelial cell monolayers in terms of integrity nor cell metabolic activity. Moreover, it was found that viable corneal cells adhered to the hydrogel, showing the typical morphology of epithelial cells and that such response was not influenced by the STF pre-conditioning of the hydrogel surface. The results of the study confirm that PVA-CNC hydrogel is a promising ophthalmic biomaterial, motivating future in vitro and in vivo biocompatibility studies.