Acetoin, a versatile platform chemical and popular food additive, poses a challenge to the biosafety strain Bacillus subtilis when produced in high concentrations due to its intrinsic toxicity. Incorporating the PHB synthesis pathway into Bacillus subtilis 168 has been shown to significantly enhance the strain’s acetoin tolerance. This study aims to elucidate the molecular mechanisms underlying the response of B. subtilis 168-phaCBA to acetoin stress, employing transcriptomic and metabolomic analyses. Acetoin stress induces fatty acid degradation and disrupts amino acid synthesis. In response, B. subtilis 168-phaCBA down-regulates genes associated with flagellum assembly and bacterial chemotaxis, while up-regulating genes related to the ABC transport system encoding amino acid transport proteins. Notably, genes coding for cysteine and d-methionine transport proteins (tcyB, tcyC and metQ) and the biotin transporter protein bioY, are up-regulated, enhancing cellular tolerance. Our findings highlight that the expression of phaCBA significantly increases the ratio of long-chain unsaturated fatty acids and modulates intracellular concentrations of amino acids, including l-tryptophan, l-tyrosine, l-leucine, l-threonine, l-methionine, l-glutamic acid, l-proline, d-phenylalanine, l-arginine, and membrane fatty acids, thereby imparting acetoin tolerance. Furthermore, the supplementation with specific exogenous amino acids (l-alanine, l-proline, l-cysteine, l-arginine, l-glutamic acid, and l-isoleucine) alleviates acetoin’s detrimental effects on the bacterium. Simultaneously, the introduction of phaCBA into the acetoin-producing strain BS03 addressed the issue of insufficient intracellular cofactors in the fermentation strain, resulting in the successful production of 70.14 g/L of acetoin through fed-batch fermentation. This study enhances our understanding of Bacillus’s cellular response to acetoin-induced stress and provides valuable insights for the development of acetoin-resistant Bacillus strains.

Considerable progress has been made in recent years to the development of sustainable polymers from bio-based feedstocks. In this study, 100% bio-based nylons were prepared via an integrated chemical and biological process from lignocellulose. These novel nylons were obtained by the melt polymerization of 3-propyladipic acid derived from lignin and 1,5-pentenediamine/1,4-butanediamine derived from carbohydrate sugar. Central to the concept is a three-step noble metal free catalytic chemical funnelling sequence (Raney Ni mediated reductive catalytic fractionation - reductive funnelling - oxidative funnelling), which allowed for obtaining a single component 3-propyladipic acid from lignin with high efficiency. The structural and thermodynamic properties of the obtained nylons have been systematically investigated, and thus obtained transparent bio-based nylons exhibited higher Mw (> 32,000) and excellent thermal stability (Td5% > 265 °C). Considering their moderate Tg and good melt strength, these transparent bio-based nylons could serve as promising functional additives or temperature-responsive materials.

Abstract Background Methanol, a promising non-food fermentation substrate, has gained increasing interest as an alternative feedstock to sugars for the bio-based production of value-added chemicals. Butyribacterium methylotrophicum, one of methylotrophic-acetogenic bacterium, is a promising host to assimilate methanol coupled with CO2 fixation for the production of organic acids, such as butyric acid. Although the methanol utilization pathway has been identified in B. methylotrophicum, little knowledge was currently known about its regulatory targets, limiting the rational engineering to improve methanol utilization. Results In this study, we found that methanol assimilation of B. methylotrophicum could be significantly improved when using corn steep liquor (CSL) as the co-substrate. The further investigation revealed that high level of lysine was responsible for enhanced methanol utilization. Through the transcriptome analysis, we proposed a potential mechanism by which lysine confers improved methylotrophy via modulating NikABCDE and FhuBCD transporters, both of which are involved in the uptake of cofactors essential for enzymes of methanol assimilation. The improved methylotrophy was also confirmed by overexpressing NikABCDE or FhuBCD operon. Finally, the de novo synthetic pathway of lysine was further engineered and the methanol utilization and butyric acid production of B. methylotrophicum were improved by 63.2% and 79.7%, respectively. After an optimization of cultivation medium, 3.69 g/L of butyric acid was finally achieved from methanol with a yield of 76.3%, the highest level reported to date. Conclusion This study revealed a novel mechanism to regulate methanol assimilation by lysine in B. methylotrophicum and engineered it to improve methanol bioconversion to butyric acid, culminating in the synthesis of the highest butyric acid titer reported so far in B. methylotrophicum. What’s more, our work represents a further advancement in the engineering of methylotrophic-acetogenic bacterium to improve C1-compound utilization. Graphical Abstract

A chemo-enzymatic strategy for achieving furan-2,5-dicarboxylic acid precursors via 5-keto-d-gluconic acid as a stable intermediate.

A novel magnetic 2D/2D heterogeneous structure MXene@NiFe-LDH@Fe3O4 was prepared for immobilization of laccase. In this work, two-dimensional MXene nanosheets with abundant surface functional groups were het-erogeneously assembled with layered double hydroxide (LDH) by in situ co-precipitation method, and magnetic nanoparticle Fe3O4 with excellent biocompatibility and rapid separation of materials and substrates was intro-duced subsequently, and then silane coupling agent was coated on the surface of MXene@NiFe-LDH@Fe3O4. The functionalized MXene@NiFe-LDH@Fe3O4 was employed as a carrier to immobilize laccase from Trametes-Ver-sicolor. The enzyme loading of the nanocomposite material is as high as 167.9 mg/g. Compared with free en-zymes, the immobilized laccase showed a notable improvement in stability in a wider range of pHs (2.0-8.0), temperatures (25-60 degrees C), and organic solvent concentration (1-5 M). The reusability study suggested that after 7 cycles of repeated catalysis, the degradation efficiency could reach 55.5% for 2,4-dichlorophenol, 92.1% for bisphenol A and70.9% for pyrocatechol. The results provide a new carrier preparation strategy for the efficient immobilization of laccase.

Serotonin, as a monoamine neurotransmitter, modulates the activity of the nervous system. Due to its importance in the coordination of movement and regulation of mood, impairments in the synthesis and homeostasis of serotonin are involved in numerous disorders, including depression, Parkinson’s disease, and anxiety. Currently, serotonin is primarily obtained via natural extraction. But this method is time-consuming and low yield, as well as unstable supply of raw materials. With the development of synthetic biology, researchers have established the method of microbial synthesis of serotonin. Compared with natural extraction, microbial synthesis has the advantages of short production cycle, continuous production, not limited by season and source, and environment-friendly; hence, it has garnered considerable research attention. However, the yield of serotonin is still too low to industrialization. Therefore, this review provides the latest progress and examples that illustrate the synthesis pathways of serotonin as well as proposes strategies for increasing the production of serotonin. Key points • Two biosynthesis pathways of serotonin are introduced. • L-tryptophan hydroxylation is the rate-limiting step in serotonin biosynthesis. • Effective strategies are proposed to improve serotonin production.

In this study, co-immobilization of PLP and its dependent enzyme were investigated using a novel type of porous chitin bead (PCB). Crayfish shell was used to prepare PCB via dissolution of it to form beads, followed by the removal of CaCO3 and protein in-situ. Scanning electron microscopy, Fourier transform infrared spectroscopy, and Brunauer-Emmett-Teller method showed that the PCB had abundant porous structures with deacetylation degree of 33 % and the specific surface area of 35.87 m2/g. Then, the beads are used to co-immobilize pyridoxal 5-phosphate (PLP) and L-lysine decarboxylase fused with chitin-binding protein (SpLDC-ChBD). Laser scanning confocal microscopy revealed that the beads could co-immobilize PLP and SpLDC-ChBD successfully. In addition, a packed bed was also constructed using the PCB containing co-immobilized SpLDC-ChBD and PLP. The substrate conversion remained at 91.09 % after 48 h with 50 g/L L-lysine, which showed good continuous catalysis ability. This study provides a novel method for co-immobilization of enzyme and PLP, as well as develops a new application of waste crustacean shells.

Siglec-15, an inhibitory immune checkpoint, is an emerging target in cancer immunotherapy. Blocking the function of Siglec-15 is an excellent strategy for cancer treatment and antibody blockade has been used to target Siglec-15. However, whether Fc-mediated effector functions contribute to the therapeutic effect of antibodies remains unclear. Herein, we generated a monoclonal antibody, 1-15D1, which had a high binding affinity with Siglec-15 and strongly activated T-cell immune response in vitro. Subsequently, the Fc-mediated effector functions of 1-15D1 were explored in a Siglec-15 humanized mouse model, and further improvement in antitumor efficacy was observed in the mouse IgG2a isotype group. Thus, we demonstrate that the antitumor effects of 1-15D1 were mediated via multiple factors. In addition to the T-cell immune response, 2 novel mechanisms were explored, including the internalization of the cell surface Siglec-15 and Fc-mediated effector functions. In conclusion, our studies not only provide a potential agent for the improvement of cancer immunotherapy but also suggest that a specific role of Fc-mediated immune regulation may improve the therapeutic potency of Siglec-15 monoclonal antibody.

Industrial microbes have become the core of biological manufacturing, which utilized as the cell factory for production of plenty of chemicals, fuels and medicine. However, the challenge that the extreme stress conditions exist in production is unavoidable for cell factory. Consequently, to enhance robustness of the chassis cell lays the foundation for development of bio-manufacturing. Currently, the researches on cell tolerance covered various aspects, involving reshaping regulatory network, cell membrane modification and other stress response. In fact, the strategies employed to improve cell robustness could be summarized into two directions, irrational engineering and rational engineering. In this review, the metabolic engineering technologies on enhancement of microbe tolerance to industrial conditions are summarized. Meanwhile, the novel thoughts emerged with the development of biological instruments and synthetic biology are discussed.

1,5-Pentanediamine hydrochloride (PDAH) was an important raw material for the preparation of bio-based pentamethylene diisocyanate (PDI). PDI has shown excellent properties in the application of adhesives and thermosetting polyurethane. In this study, PDAH was recovered from 1,5-pentanediamine (PDA) fermentation broth using a cation exchange resin and purified by crystallization. D152 was selected as the most suitable resin for purifying PDAH. The effects of solution pH, initial temperature, concentration of PDA, and adsorption time were studied by the static adsorption method. The equilibrium adsorption data were well fitted to Langmiur, Freundlich, and Temkin-Pyzhev adsorption isotherms. The adsorption free energy, enthalpy, and entropy were calculated. The experimental data were well described by the pseudo first-order kinetics model. The dynamic experiment in the fixed bed column showed that under optimal conditions, the adsorption capacity reached 96.45 mg g(-1), and the recovery proportion of the effective section reached 80.16%. In addition, the crystallization of the PDAH solution obtained by elution proved that the crystal product quality of resin eluting solution was highest. Thus, our research will contribute to the industrial scale-up of the separation of PDAH.

Based on environmental concerns and the worldwide energy crisis, CO2 photoreduction into value-added chemicals has attracted considerable attention. However, insufficient reducing forces remain a key challenge. A nanophotocatalyst, constructed by synchronously embedding formate dehydrogenase and CdS into a zeolitic imidazolate framework, promotes CO2 photoreduction by relying on photo and chemical reducing forces. Hydrogen peroxide (H2O2) can replace water (H2O) to provide protons and electrons for CO2 photoreduction. Compared with adding reduced nicotinamide adenine dinucleotide (NADH) only, the yield of formic acid and the maximum catalytic rate increased by 2.78 and 2.55 times with adding NADH and H2O2 together as a reducing force. Protons and electrons from photolyzed H2O2 as a chemical reducing force and CdS as a photo reducing force together promote the cofactor regeneration, which in turn enhances CO2 photoreduction. This work is expected to guide a simple green method for promoting CO2 photoreduction to prepare value-added chemicals and solar fuels.

Okara, a renewable biomass resource, is a promising fermentative raw material for the bio-production of value-added chemicals due to its abundance and low-costs. we developed a process for the enzymatic hydrolysis of okara, and then engineered Bacillus subtilis to utilize mixed sugars to produce acetoin in okara hydrolysis without the addition of a supplemental nitrogen source. Okara was initially hydrolyzed with cellulase, β-glucosidase, and pectinase to obtain okara hydrolysate containing mixed sugars (32.78 ± 0.23 g/L glucose, 1.43 ± 0.064 g/L arabinose, 7.74 ± 0.11 g/L galactose) and amino acids. In this study, Bacillus subtilis 168 was used as the acetoin-producing strain, and the key genes bdhA and acoA of the acetoin catabolism pathway were knocked out to improve the fermentation yield of acetoin. In order to utilize the galactose in the hydrolysate, the recombinant strain BS03 ( Bacillus subtilis 168∆ bdhA ∆ acoA ) was used to overexpress the arabinose transporter-encoding gene ( araE ) drive heterologous expression of the Leloir pathway gene ( galKTE ). The corn dry powder concentration was optimized to 29 g/L in the reducing sugar okara hydrolysate. The results show that the recombinant bacterium BS03 could still synthesize 11.79 g/L acetoin without using corn dry powder as a nitrogen source. Finally, using okara enzymatic hydrolysate as the carbon and nitrogen source, 11.11 g/L and 29.7 g/L acetoin were obtained by batch fermentation and fed-batch fermentation, respectively, which was further converted to 5.33 g/L and 13.37 g/L tetramethylpyrazine (TTMP) by reaction with an ammonium salt.

Aminofurans are widely used in drug synthesis as aromaticity comparison modules of aniline. However, unsubstituted aminofuran compounds are difficult to be prepared. Herein, a process for the selective conversion of N-acetyl-D-glucosamine (NAG) to unsubstituted 3-acetamidofuran (3AF) was presented.The yield of 3AF from NAG catalyzed by a ternary Ba(OH)2-H3BO3-NaCl catalytic system in NMP at 180 °C for 20 min can reach 73.9%. Mechanistic studies revealed that the pathway to 3AF starts with a base-promoted retro-aldol condensation of the ring-opened NAG, affording the key intermediate N-acetylerythrosamine. Judicious selection of the catalyst system conditions enables the selective conversion of NAG biomass to 3AF or 3-acetamido-5-acetylfuran (3A5AF).

N-acetylneuraminic acid (Neu5Ac) possesses the ability to promote mental health and enhance immunity and is widely used in both medicine and food fields as a supplement. Enzymatic production of Neu5Ac using N-acetyl-D-glucosamine (GlcNAc) as substrate was significant. However, the high-cost GlcNAc limited its development. In this study, an in vitro multi-enzyme catalysis was built to produce Neu5Ac using affordable chitin as substrate. Firstly, exochitinase SmChiA from Serratia proteamaculans and N-acetylglucosaminosidase CmNAGase from Chitinolyticbacter meiyuanensis SYBC-H1 were screened and combined to produce GlcNAc, effectively. Then, the chitinase was cascaded with N-acetylglucosamine-2-epimerase (AGE) and N-neuraminic acid aldolase (NanA) to produce Neu5Ac; the optimal conditions of the multi-enzyme catalysis system were 37°C and pH 8.5, the ratio of AGE to NanA (1:4) and addition of pyruvate (70 mM), respectively. Finally, 9.2 g/L Neu5Ac could be obtained from 20 g/L chitin within 24 h along with two supplementations with pyruvate. This work will lay a good foundation for the production of Neu5Ac from cheap chitin resources.

Aminofurans are widely used in drug synthesis as aromatic modules analogous to aniline. However, unsubstituted amino-furan compounds are difficult to prepare. In this study, a process for the selective conversion of N-acetyl-D-glucosamine (NAG) into unsubstituted 3-acetamidofuran (3AF) is developed. The yield of 3AF from NAG catalyzed by a ternary Ba-(OH)(2)-H3BO3-NaCl catalytic system in N-methylpyrrolidone at 180 degrees C for 20 min can reach 73.9 %. Mechanistic studies reveal that the pathway to 3AF starts with a base-promoted retro-aldol condensation of the ring-opened NAG, affording the key intermediate N-acetylerythrosamine. Judicious selection of the catalyst system and conditions enables the selective conversion of biomass-derived NAG into 3AF or 3-acetamido-5-acetylfuran.

We report a smart ion-exchange strategy to anchor molybdenum oxide particles on charge-modulated conjugated triazine frameworks (Mo/CTF-I) for electrochemically fixing nitrogen. The strong interaction between MoOx and CTF-I is conducive to the activation of the inert N2 molecule in the electro-chemical process. As a result, 5% Mo/CTF-I exhibited an excellent faradaic efficiency of 27.3% and an NH3 yield rate of 7.23 μg h-1 mgcat.-1 at -0.405 V vs. RHE in 0.1 M KOH, surpassing most previous reports.

FDCA (2,5-furandicarboxylic acid), produced by oxidizing carbohydrate-derived HMF (5-hydroxymethylfurfural), is a valuable monomer for biopolymers. The difference in the solvent system between the dehydration reaction and oxidation reactions seriously affects the process continuity and production efficiency. Herein, we reported a cascade process for FDCA production from carbohydrates in a single acetic acid system. The fructose conversion was complete and total furan compounds yield reached nearly 90

The concomitant recycling of enzymes and co-factors is a big challenge in biocatalysis. In this study, co -immobilization of the enzyme and the co-factor pyridoxal 5 '-phosphate was achieved using chitin-based mi-crospheres as the support. Chitin/chitosan composite microspheres were prepared and then modified with polyethyleneimine. Three pyridoxal 5 '-phosphate-independent enzymes were used to demonstrate that the self-sufficient biocatalysts based on chitin/chitosan composite microspheres and polyethyleneimine modified mi-crospheres displayed good generalizability for high recycling efficiency of both enzyme and pyridoxal 5 '-phos-phate. Furthermore, the self-sufficient biocatalysts were applied in the continuous flow production of cadaverine and maintained good continuous catalysis without the exogenous addition of pyridoxal 5 '-phosphate, suggesting that this co-immobilization platform shows promise for application in industrial biocatalysis.

Methanol is becoming an attractive fermentation feedstock for large-scale bioproduction of chemicals, due to its natural abundance and mature production technology. Native methylotrophs, which can utilize methanol as the only source of carbon and energy, are ideal hosts for methanol bioconversion due to their high methanol utilization rate and have been extensively employed in the production of value-added chemicals from methanol. Here, we review the natural methanol utilization pathways in native methylotrophs, describing the available synthetic biology tools developed for engineering native methylotrophs, and discuss the strategies for improving their methanol utilization efficiency. Finally, the representative examples of engineering the native methylotrophs to produce value-added products from methanol are summarized. Furthermore, we also discuss the major challenges and possible solutions for the application of native methylotrophs in methanol-based biomanufacturing.