How easy is it to sneak up on a robot? We examine whether we can detect people using only the incidental sounds they produce as they move, even when they try to be quiet. We collect a robotic dataset of high-quality 4-channel audio paired with 360 degree RGB data of people moving in different indoor settings. We train models that predict if there is a moving person nearby and their location using only audio. We implement our method on a robot, allowing it to track a single person moving quietly with only passive audio sensing. For demonstration videos, see our project page: https://sites.google.com/view/unkidnappable-robot

Touch plays a fundamental role in manipulation for humans; however, machine perception of contact and pressure typically requires invasive sensors. Recent research has shown that deep models can estimate hand pressure based on a single RGB image. However, evaluations have been limited to controlled settings since collecting diverse data with ground-truth pressure measurements is difficult. We present a novel approach that enables diverse data to be captured with only an RGB camera and a cooperative participant. Our key insight is that people can be prompted to apply pressure in a certain way, and this prompt can serve as a weak label to supervise models to perform well under varied conditions. We collect a novel dataset with 51 participants making fingertip contact with diverse objects. Our network, PressureVision++, outperforms human annotators and prior work. We also demonstrate an application of PressureVision++ to mixed reality where pressure estimation allows everyday surfaces to be used as arbitrary touch-sensitive interfaces. Code, data, and models are available online.(1)

Sensing contact pressure applied by a gripper can benefit autonomous and teleoperated robotic manipulation, but adding tactile sensors to a gripper's surface can be difficult or impractical. If a gripper visibly deforms, contact pressure can be visually estimated using images from an external camera that observes the gripper. While researchers have demonstrated this capability in controlled laboratory settings, prior work has not addressed challenges associated with visual pressure estimation in the wild, where lighting, surfaces, and other factors vary widely. We present a deep learning model and associated methods that enable visual pressure estimation under widely varying conditions. Our model, Visual Pressure Estimation for Robots (ViPER), takes an image from an eye-in-hand camera as input and outputs an image representing the pressure applied by a soft gripper. Our key insight is that force/torque sensing can be used as a weak label to efficiently collect training data in settings where pressure measurements would be difficult to ob-tain. When trained on this weakly labeled data combined with fully labeled data that includes pressure measurements, ViPER outperforms prior methods, enables precision manipulation in cluttered settings, and provides accurate estimates for unseen conditions relevant to in-home use.

Robotic manipulation can benefit from wrist-mounted force/torque (F/T) sensors, but conventional F/T sensors can be expensive, difficult to install, and damaged by high loads. We present Visual Force/Torque Sensing (VFTS), a method that visually estimates the 6-axis F/T measurement that would be reported by a conventional F/T sensor. In contrast to approaches that sense loads using internal cameras placed behind soft exterior surfaces, our approach uses an external camera with a fisheye lens that observes a soft gripper. VFTS includes a deep learning model that takes a single RGB image as input and outputs a 6-axis F/T estimate. We trained the model with sensor data collected while teleoperating a robot (Stretch RE1 from Hello Robot Inc.) to perform manipulation tasks. VFTS outperformed F/T estimates based on motor currents, generalized to a novel home environment, and supported three autonomous tasks relevant to healthcare: grasping a blanket, pulling a blanket over a manikin, and cleaning a manikin's limbs. VFTS also performed well with a manually operated pneumatic gripper. Overall, our results suggest that an external camera observing a soft gripper can perform useful visual force/torque sensing for a variety of manipulation tasks.

Soft robotic grippers facilitate contact-rich manipulation, including robust grasping of varied objects. Yet the beneficial compliance of a soft gripper also results in significant deformation that can make precision manipulation challenging. We present visual pressure estimation & control (VPEC), a method that infers pressure applied by a soft gripper using an RGB image from an external camera. We provide results for visual pressure inference when a pneumatic gripper and a tendon-actuated gripper make contact with a flat surface. We also show that VPEC enables precision manipulation via closed-loop control of inferred pressure images. In our evaluation, a mobile manipulator (Stretch RE1 from Hello Robot) uses visual servoing to make contact at a desired pressure; follow a spatial pressure trajectory; and grasp small low-profile objects, including a microSD card, a penny, and a pill. Overall, our results show that visual estimates of applied pressure can enable a soft gripper to perform precision manipulation.

People often interact with their surroundings by applying pressure with their hands. While hand pressure can be measured by placing pressure sensors between the hand and the environment, doing so can alter contact mechanics, interfere with human tactile perception, require costly sensors, and scale poorly to large environments. We explore the possibility of using a conventional RGB camera to infer hand pressure, enabling machine perception of hand pressure from uninstrumented hands and surfaces. The central insight is that the application of pressure by a hand results in informative appearance changes. Hands share biomechanical properties that result in similar observable phenomena, such as soft-tissue deformation, blood distribution, hand pose, and cast shadows. We collected videos of 36 participants with diverse skin tone applying pressure to an instrumented planar surface. We then trained a deep model (PressureVisionNet) to infer a pressure image from a single RGB image. Our model infers pressure for participants outside of the training data and outperforms baselines. We also show that the output of our model depends on the appearance of the hand and cast shadows near contact regions. Overall, our results suggest the appearance of a previously unobserved human hand can be used to accurately infer applied pressure.

Contact pressure between the human body and its surroundings has important implications. For example, it plays a role in comfort, safety, posture, and health. We present a method that infers contact pressure between a human body and a mattress from a depth image. Specifically, we focus on using a depth image from a downward facing camera to infer pressure on a body at rest in bed occluded by bedding, which is directly applicable to the prevention of pressure injuries in healthcare. Our approach involves augmenting a real dataset with synthetic data generated via a soft-body physics simulation of a human body, a mattress, a pressure sensing mat, and a blanket. We introduce a novel deep network that we trained on an augmented dataset and evaluated with real data. The network contains an embedded human body mesh model and uses a white-box model of depth and pressure image generation. Our network successfully infers body pose, outperforming prior work. It also infers contact pressure across a 3D mesh model of the human body, which is a novel capability, and does so in the presence of occlusion from blankets.

Physical contact between hands and objects plays a critical role in human grasps. We show that optimizing the pose of a hand to achieve expected contact with an object can improve hand poses inferred via image-based methods. Given a hand mesh and an object mesh, a deep model trained on ground truth contact data infers desirable contact across the surfaces of the meshes. Then, ContactOpt efficiently optimizes the pose of the hand to achieve desirable contact using a differentiable contact model. Notably, our contact model encourages mesh interpenetration to approximate deformable soft tissue in the hand. In our evaluations, our methods result in grasps that better match ground truth contact, have lower kinematic error, and are significantly preferred by human participants. Code and models are available online1.

This document provides additional implementation details and qualitative results to supplement the main paper. Additional details are given about the object subsets used while training networks on ContactPose (Section 2) and HO-3D (Section 3). Training settings for the DeepContact estimation network (Section 4), hyperparameters for the contact optimization procedure (Section 5), and more details on the evaluations (Section 6) are discussed. Finally, we provide more qualitative examples of the full pipeline running (Section 7).

The ubiquitous availability of wearable sensing devices has rendered large scale collection of movement data a straightforward endeavor. Yet, annotation of these data remains a challenge and as such, publicly available datasets for human activity recognition (HAR) are typically limited in size as well as in variability, which constrains HAR model training and effectiveness. We introduce masked reconstruction as a viable self-supervised pre-training objective for human activity recognition and explore its effectiveness in comparison to state-of-the-art unsupervised learning techniques. In scenarios with small labeled datasets, the pre-training results in improvements over end-to-end learning on two of the four benchmark datasets. This is promising because the pre-training objective can be integrated "as is" into state-of-the-art recognition pipelines to effectively facilitate improved model robustness, and thus, ultimately, leading to better recognition performance.

We investigated the application of haptic feedback control and deep reinforcement learning (DRL) to robot-assisted dressing. Our method uses DRL to simultaneously train human and robot control policies as separate neural networks using physics simulations. In addition, we modeled variations in human impairments relevant to dressing, including unilateral muscle weakness, involuntary arm motion, and limited range of motion. Our approach resulted in control policies that successfully collaborate in a variety of simulated dressing tasks involving a hospital gown and a T-shirt. In addition, our approach resulted in policies trained in simulation that enabled a real PR2 robot to dress the arm of a humanoid robot with a hospital gown. We found that training policies for specific impairments dramatically improved performance; that controller execution speed could be scaled after training to reduce the robot's speed without steep reductions in performance; that curriculum learning could be used to lower applied forces; and that multi-modal sensing, including a simulated capacitive sensor, improved performance.

The prototype fuel cell electric vehicle (FCEV) Maxwell currently holds the Guinness World Record for "Most Fuel-Efficient Vehicle" at 6,196 km/l (14,573 MPGe). The vehicle draws less than 21W of electrical power at 25 km/h. This work outlines the powertrain architecture and presents the vehicle's sources of electrical and mechanical losses, quantified through rigorous experimentation. The individual components are modelled and combined into a total model of performance representing all energy flow in the vehicle. The total model is found to have excellent predictive power with only 4.3% error compared to measured on-track performance.