The Linear Coherent Light Source II (LCLS-II) is a free electron laser facility currently in its final construction stage at Stanford Linear Accelerator Center. The project includes two variable-gap, hybrid-permanent-magnet undulator lines: A soft x-ray undulator line with 21 undulator segments optimized for a photon energy range from 0.2 keV to 1.3 keV and a hard x-ray undulator line with 32 undulator segments designed for a photon energy range from 1.0 keV to 25.0 keV. This paper focuses on the development of the hard x-ray undulator line which utilizes uniquely-developed, verticallypolarizing undulators. To fully compensate the magnetic force throughout the entire gap range these devices incorporate non-linear spring systems which permit the construction of relatively compact undulators. However, significant magnetic field repeatability challenges have been encountered during prototyping of this novel design. The paper describes some of the innovative design improvements that were implemented which lead to reaching the LCLS-II required performance. These final design solutions can also be advantageous improving the operation of any future undulator design.

The new free electron laser facility Linear Coherent Light Source II (LCLS-II) under construction at SLAC National Accelerator Laboratory will use planar variable gap undulators of hybrid type for the production of free electron laser (FEL) radiation. The LCLS-II will include two FELs with two separate rows of undulators to generate soft and hard x-rays. The soft x-rays will be produced by undulators with 39 mm period length (SXR) and the hard x-rays will be produced by undulators with 26 mm period length (HXR). Both the SXR and the HXR undulators are 3.4 m long and they use a common support structure and frame. In total 21 SXR and 32 HXR undulators will be produced by Lawrence Berkeley National Laboratory in collaboration with SLAC National Accelerator Laboratory. A full-scale prototype with 32 mm period length, called HXU, has been assembled at Lawrence Berkeley National Laboratory (LBNL). The present status of the design, prototyping, and pre-series production of the SXR and HXR undulators are presented in this paper together with the first results from measurements on the full scale HXU prototype.

Author(s): Steier, C; Anders, A; Byrd, J; Chow, K; Duarte, R; Jung, J; Luo, T; Nishimura, H; Oliver, T; Osborn, J; Padmore, H; Pappas, C; Robin, D; Sannibale, F; De Santis, S; Schlueter, R; Sun, C; Swenson, C; Venturini, M; Waldron, W; Wallen, E; Wan, W; Yang, Y | Abstract: Improvements in brightness and coherent flux of about two orders of magnitude over operational storage ring based light sources are possible using multi bend achromat lattice designs [1]. These improvements can be implemented as upgrades of existing facilities, like the proposed upgrade of the Advanced Light Source, making use of the existing infrastructure, thereby reducing cost and time needed to reach full scientific productivity on a large number of beamlines. An RaD program was started at LBNL to further develop the technologies necessary for diffraction-limited storage rings. It involves many areas, and focuses on the specific needs of soft x-ray facilities [2]: NEG coating of small chambers, swap-out injection, bunch lengthening, magnets/radiation production, x-ray optics, and beam physics design optimization. Hardware prototypes have been built and concepts and equipment was tested in beam tests on the existing ALS.

Copyright © 2016 CC-BY-3.0 and by the respective authors. Improvements in brightness and coherent flux of about two orders of magnitude over operational storage ring based light sources are possible using multi bend achromat lattice designs [1]. These improvements can be implemented as upgrades of existing facilities, like the proposed upgrade of the Advanced Light Source, making use of the existing infrastructure, thereby reducing cost and time needed to reach full scientific productivity on a large number of beamlines. An R & D program was started at LBNL to further develop the technologies necessary for diffraction-limited storage rings. It involves many areas, and focuses on the specific needs of soft x-ray facilities [2]: NEG coating of small chambers, swap-out injection, bunch lengthening, magnets/radiation production, x-ray optics, and beam physics design optimization. Hardware prototypes have been built and concepts and equipment was tested in beam tests on the existing ALS.

The Advanced Light Source (ALS) at Berkeley Lab remains one of the brightest sources for soft x-rays worldwide. A multiyear upgrade of the ALS is underway, which includes new and replacement x-ray beamlines, a replacement of many of the original insertion devices and many upgrades to the accelerator. The accelerator upgrade that affects the ALS performance most directly is the ALS brightness upgrade [1], which reduces the horizontal emittance from 6.3 to 2.0 nm (2.5 nm effective). Magnets for this upgrade were installed in late 2012 and early 2013 followed by user operation with the reduced emittance.

Superconducting undulators provide higher magmatic field to increase the brilliance and photon energy of synchrotron light sources. To quantify the amount of beam-based heat load of storage rings and optimize the design of cryogenic system, Lawrence Berkeley National Laboratory (LBNL) proposed a cryogenic calorimeter to perform the working condition of superconducting undulators. The calorimeter has been developed by Shanghai Institute of Applied Physics (SINAP) and installed on storage ring of Shanghai Synchrotron Radiation Facility (SSRF). Also, online experiments started in September of 2012. This paper describes the cryogenic system and beam-based heat load measurement system. Also, some measurement results are given in the paper.

The pulsed wire technique is an attractive option for the measurement of undulators where the measurement access is restricted due to, for example, narrow undulator gaps or cryogenic environments in the case of superconducting undulators. Using the pulsed wire technique, direct measurements of the first and second integrals of the magnetic field can be obtained. However, one of the main limitations of this technique is the error introduced by dispersive wave motion, due to the finite flexural rigidity of the wire. For the measurement of the first integral of the magnetic field, an error is also introduced by the use of a current pulse with finite pulse width. In this paper, a general solution is presented for dispersive wave motion in pulsed wire measurements. A method for the measurement of the dispersive wave speed is presented and demonstrated through experimental examples. An algorithm is derived which corrects the dispersion and finite pulse-width errors in the measurement of first magnetic field integrals and the dispersion error in the measurement of second magnetic field integrals. The effectiveness of the correction algorithms is demonstrated through experimental measurements, and the results are compared with Hall probe measurements on a short undulator.

The Advanced Light Source (ALS) at Berkeley Lab while one of the earliest 3rd generation light sources remains one of the brightest sources for soft x-rays worldwide. A multiyear upgrade of the ALS is currently under way, which includes new and replacement x-ray beamlines, a replacement of many of the original insertion devices and many upgrades to the accelerator. The accelerator upgrade that affects the ALS performance most directly is the ALS brightness upgrade, which will reduce the horizontal emittance from 6.3 to 2.2 nm (2.6 nm effective). This will result in a brightness increase by a factor of three for bendmagnet beamlines and at least a factor of two for insertion device beamlines. Magnets for this upgrade are currently in production and will be installed starting later this year.

LBNL is developing design concepts for a multi-beamline soft x-ray FEL array powered by a superconducting linear accelerator, operating with a high bunch repetition rate of approximately one MHz. The cw superconducting linear accelerator is su pplied by an injector based on a high-brightness, high-repetition-rate photocathode electron gun. Electron bunches are distributed from the linac to the array of independently configurable FEL beamlines with nominal bunch rates up to 100 kHz in each FEL, and with even pulse spacing. Individual FELs may be configured for different modes of operation, and each may produce high peak and average brightness x-rays with a flexible pulse format, and with pulse durations ranging from sub-femtoseconds to hundreds of femtoseconds. In this paper we describe conceptual design studies and optimizations. We describe recent developments in the design and performance parameters, and progress in R&D activities.

Forty-eight harmonic sextupole magnets with integrated dipole correctors and skew quadrupole coils will be introduced in the Advanced Light Source Storage Ring. These new magnets are required to allow the ALS to provide the 40 beamline users with higher photon beam brightness (factor of 2 or 3). Introducing new combined-function magnets in an existing storage ring is a challenge due to the limited space available and a balance had to be found between magnet performance and spatial constraints. Consequently four different magnet designs were required. The calculation and simulation results obtained for each design as well as the impact of the different design choices on the magnetic performance are developed in this paper.

The Advanced Light Source (ALS) is a third-generation light source in operation since 1993. This light source is providing state-of-the-art performance to more than 40 beamlines and their users, due to the upgrades that have been completed over the last few years. The storage ring upgrade project that is developed here will allow the ALS to provide the 40 beamline users with higher photon beam brightness (factor of 2 or 3) by having its storage ring lattice modified. Forty-eight harmonic sextupole magnets with integrated dipole correctors and skew quadrupole coils will be introduced, which will require a level of installation activity not seen at the ALS since its original construction in 1991. Introducing new combined-function magnets in an existing storage ring is a challenge due to the limited space available and a balance had to be found between magnet performance and spatial constraints. After an introduction reviewing the characteristics of the three design families of the 48 combined-function magnets, the magnet fabrication and installation are developed along with analyses based on the magnetic measurements and the ALS storage ring commissioning results.

The Advanced Light Source (ALS) at Berkeley Lab is one of the earliest 3rd generation light sources. Over the years substantial upgrades have been implemented to keep the facility at the forefront of soft x-ray sources. A multiyear upgrade is currently under way, which includes new and replacement x-ray beamlines, a replacement of many of the original insertion devices and many upgrades to the accelerator. The accelerator upgrade that affects the ALS performance most directly is the ALS brightness upgrade, which will reduce the horizontal emittance from 6.3 to 2.2 nm (2.6 nm effective). This will result in a brightness increase by a factor of three for bend magnet beamlines and at least a factor of two for insertion device beamlines and will keep the ALS competitive with newer sources.