Upon pollination, two sperm cells are transported inside the growing pollen tube toward the apex. One sperm cell fertilizes the egg cell to form the zygote, while the other fuses with the two polar nuclei to form the triploid endosperm. In Arabidopsis thaliana, the transport of the two sperm cells is characterized by sequential forward and backward movements with intermediate pauses. Until now, it is under debate which components of the plant cytoskeleton govern this mechanism. The sperm cells are interconnected and linked to the vegetative nucleus via a cytoplasmic projection, thus forming the male germ unit. This led to the common hypothesis that the vegetative nucleus is actively transported via myosin motors along actin cables while pulling along the sperm cells as passive cargo. In this study, however, we show that upon occasional germ unit disassembly, the sperm cells are transported independently and still follow the same bidirectional movement pattern. Moreover, we found that the net movement of sperm cells results from a combination of both longer and faster runs toward the pollen tube apex. We propose that the observed saltatory movement can be explained by the function of kinesins with calponin homology domain (KCH). This subgroup of the kinesin-14 family actively links actin filaments and microtubules. Based on KCH's specific properties derived from in vitro experiments, we built a tug-of-war model that could reproduce the characteristic sperm cell movement in pollen tubes.

The formation and maintenance of the mitotic spindle during cell division requires several microtubule-interacting motor proteins. Members of the kinesin-5 family play an essential role in the bipolar organization of the spindle. These highly conserved, homotetrameric proteins cross-link anti-parallel microtubules and slide them apart to elongate the spindle during the equal separation of chromosomes. Whereas vertebrate kinesin-5 proteins are well studied, knowledge about the biochemical properties and the function of plant kinesin-5 proteins is still limited. Here, we characterized the properties of AtKRP125b, one of four kinesin-5 proteins in Arabidopsis thaliana. In in vitro motility assays, AtKRP125b displayed the archetypal characteristics of a kinesin-5 protein, a low velocity of about 20 nm·s−1, and a plus end-directed, processive movement. Moreover, AtKRP125b was able to cross-link microtubules and to slide them apart, as required for developing and maintaining the mitotic spindle. In line with such a function, GFP-AtKRP125b fusion proteins were predominantly detected in the nucleus when expressed in Arabidopsis thaliana leaf protoplasts or Nicotiana benthamiana epidermis cells and analyzed by confocal microscopy. However, we also detected GFP signals in the cytoplasm, suggesting additional functions. By generating and analyzing AtKRP125b promoter-reporter lines, we showed that the AtKRP125b promoter was active in the vascular tissue of roots, lateral roots, cotyledons, and true leaves. Remarkably, we could not detect promoter activity in meristematic tissues. Taken together, our biochemical data support a role of AtKRP125b in mitosis, but it may also have additional functions outside the nucleus and during interphase.

Cytoskeletal motors transform chemical energy into mechanical work to drive essential cellular functions. Optical trapping experiments have provided crucial insights into the operation of these molecular machines under load. However, the throughput of such force spectroscopy experiments is typically limited to one measurement at a time. Here, we describe an alternative, highly-parallel, microfluidics-based method that allows for rapid collection of force-dependent motility parameters of cytoskeletal motors. We applied tunable hydrodynamic forces to stepping kinesin-1 motors via DNA-tethered beads and utilized a large field-of-view to simultaneously track the velocities, run lengths and interaction times of hundreds of individual kinesin-1 molecules under varying resisting and assisting loads. Importantly, the 16-μm long DNA tethers between the motors and the beads significantly reduced the vertical component of the applied force pulling the motors away from the microtubule. Our approach is readily applicable to other molecular systems and constitutes a new methodology for parallelized single-molecule force studies on cytoskeletal motors.

Phototaxis, which is the ability to move towards or away from a light source autonomously, is a common mechanism of unicellular algae. It evolved multiple times independently in different plant lineages. As of yet, algal phototaxis has been linked mainly to the presence of cilia, the only known locomotive organelle in unicellular algae. Red algae (Rhodophyta), however, lack cilia in all stages of their life cycle. Remarkably, multiple unicellular red algae like the extremophile Cyanidioschyzon merolae (C. merolae) can move towards light. Remarkably, it has remained unclear how C. merolae achieves movement, and the presence of a completely new mechanism has been suggested. Here we show that the basis of this movement are novel retractable projections, termed tentacles due to their distinct morphology. These tentacles could be reproducibly induced within 20 min by increasing the salt concentration of the culture medium. Electron microscopy revealed filamentous structures inside the tentacles that we identified to be actin filaments. This is surprising as C. merolae’s single actin gene was previously published to not be expressed. Based on our findings, we propose a model for C. merolae’s actin-driven but myosin-independent motility. To our knowledge, the described tentacles represent a novel motility mechanism.

Optical trapping experiments have provided crucial insight into the operation of molecular motors. However, these experiments are mostly limited to one measurement at a time. Here, we describe an alternative, highly-parallel, microfluidics-based method that allows for rapid data collection. We applied tunable hydrodynamic forces to stepping kinesin-1 motors via DNA-tethered beads and utilized a large field-of-view to simultaneously track the velocities, run lengths and interaction times of hundreds of individual kinesin-1 molecules under varying resisting and assisting loads. Importantly, the 16-μm long DNA tethers between the motors and the beads significantly reduced the vertical component of the applied force. Consequently, forces were predominantly exerted in the direction of motor movement, rather than away from the microtubule surface as unavoidable in conventional optical tweezers experiments. Our approach is readily applicable to other motors and constitutes a new methodology for parallelized single-molecule force studies.

Higher plants possess a large number of kinesins, but lack the minus-end directed dynein motors. However, the kinesin class XIV has strongly expanded, and minus-end directed motors from this class may have taken over functions of cytoplasmic dyneins. In this study, we address the functional aspects of a novel rice homologue of the Arabidopsis class-XIV kinesins ATK1 and ATK5. Since a loss-of-function rice mutant of this kinesin is not viable, the function was studied in tobacco BY-2 as heterologous system. OsDLK-GFP stably expressed in BY-2 cells decorates cortical microtubules, but also can shift into the nucleus of interphase cells. Because of this peculiar localisation, we coined the name Dual Localisation Kinesin (DLK). The nuclear import of this protein is strongly and reversibly promoted in response to cold. During mitosis, OsDLK is repartitioned between spindle and phragmoplast. Motility assays in vitro using show that OsDLK can convey mutual sliding of microtubules and moves at a velocity comparable to other class-XIV kinesins. When tobacco cells overexpressing OsDLK are synchronised, they exhibit a delayed entry into metaphase, while the later phases of mitosis are accelerated. The data are discussed in relation to additional functions of this kinesin type, beyond their transport along microtubules.

Cytoplasmic dynein, a microtubule‐based motor protein, is responsible for many cellular functions ranging from cargo transport to cell division. The various functions are carried out by a single isoform of cytoplasmic dynein, thus requiring different forms of motor regulation. A possible pathway to regulate motor function was revealed in optical trap experiments. Switching motor function from single steps to processive runs could be achieved by changing Mg2+ and ATP concentrations. Here, we confirm by single molecule total internal reflection fluorescence microscopy that a native cytoplasmic dynein dimer is able to switch to processive runs of more than 680 consecutive steps or 5.5 μm. We also identified the ratio of Mg2+‐free ATP to Mg.ATP as the regulating factor and propose a model for dynein processive stepping.

In eukaryotic cells, membranous vesicles and organelles are transported by ensembles of motor proteins. These motors, such as kinesin-1, have been well characterized in vitro as single molecules or as ensembles rigidly attached to nonbiological substrates. However, the collective transport by membrane-anchored motors, that is, motors attached to a fluid lipid bilayer, is poorly understood. Here, we investigate the influence of motors' anchorage to a lipid bilayer on the collective transport characteristics. We reconstituted "membrane-anchored" gliding motility assays using truncated kinesin-1 motors with a streptavidin-binding peptide tag that can attach to streptavidin-loaded, supported lipid bilayers. We found that the diffusing kinesin-1 motors propelled the microtubules in the presence of ATP. Notably, we found the gliding velocity of the microtubules to be strongly dependent on the number of motors and their diffusivity in the lipid bilayer. The microtubule gliding velocity increased with increasing motor density and membrane viscosity, reaching up to the stepping velocity of single motors. This finding is in contrast to conventional gliding motility assays where the density of surface-immobilized kinesin-1 motors does not influence the microtubule velocity over a wide range. We reason that the transport efficiency of membrane-anchored motors is reduced because of their slippage in the lipid bilayer, an effect that we directly observed using single-molecule fluorescence microscopy. Our results illustrate the importance of motor-cargo coupling, which potentially provides cells with an additional means of regulating the efficiency of cargo transport.

Obstacles on the surface of microtubules can lead to defective cargo transport, proposed to play a role in neurological diseases such as Alzheimer's. However, little is known about how motor proteins, which follow individual microtubule protofilaments (such as kinesin-1), deal with obstacles on the molecular level. Here, we used rigor-binding mutants of kinesin-1 as roadblocks to permanently obstruct individual microtubule binding sites and studied the movement of individual kinesin-1 motors by single-molecule fluorescence and dark-field scattering microscopy in vitro. In the presence of roadblocks, kinesin-1 often stopped for ∼ 0.4 s before either detaching or continuing to move, whereby the latter circumvention events occurred in >30% after a stopping event. Consequently, and in agreement with numerical simulations, the mean velocity, mean run length, and mean dwell time of the kinesin-1 motors decreased upon increasing the roadblock density. Tracking individual kinesin-1 motors labeled by 40 nm gold particles with 6 nm spatial and 1 ms temporal precision revealed that ∼ 70% of the circumvention events were associated with significant transverse shifts perpendicular to the axis of the microtubule. These side-shifts, which occurred with equal likelihood to the left and right, were accompanied by a range of longitudinal shifts suggesting that roadblock circumvention involves the unbinding and rebinding of the motors. Thus, processive motors, which commonly follow individual protofilaments in the absence of obstacles, appear to possess intrinsic circumvention mechanisms. These mechanisms were potentially optimized by evolution for the motor's specific intracellular tasks and environments.

Microtubules and actin filaments function coordinately in many cellular processes(1-3). Although much of this coordination is mediated by proteins that statically bridge the two cytoskeletal networks(4-6), kinesin-14 motors with an actin binding calponin homology domain (KCHs) have been discovered as putatively dynamic crosslinkers in plants(7,8). OsKCH1, a KCH from rice, interacts with both microtubules and actin filaments in vivo and in vitro(9). However, it has remained unclear whether this interaction is dynamic or if actin binding reduces or even abolishes the motor's motility on microtubules(10,11). Here, we directly show in vitro that OsKCH1 is a non-processive, minus-end-directed motor that transports actin filaments along microtubules. Interestingly, we observe two distinct transport velocities dependent on the relative orientation of the actin filaments with respect to the microtubules. In addition, torsional compliance measurements on individual molecules reveal low flexibility in OsKCH1. We suggest that the orientation-dependent transport velocities emerge from OsKCH1's low torsional compliance combined with an inherently oriented binding to the actin filament. Together, our results imply a central role of OsKCH1 in the polar orientation of actin filaments along microtubules, and thus a contribution to the organization of the cytoskeletal architecture.

Coupling of ATP hydrolysis to structural changes in the motor domain is fundamental to the driving of motile functions by myosins. Current understanding of this chemomechanical coupling is primarily based on ensemble average measurements in solution and muscle fibers. Although important, the averaging could potentially mask essential details of the chemomechanical coupling, particularly for mixed populations of molecules. Here, we demonstrate the potential of studying individual myosin molecules, one by one, for unique insights into established systems and to dissect mixed populations of molecules where separation can be particularly challenging. We measured ATP turnover by individual myosin molecules, monitoring appearance and disappearance of fluorescent spots upon binding/dissociation of a fluorescent nucleotide to/from the active site of myosin. Surprisingly, for all myosins tested, we found two populations of fluorescence lifetimes for individual myosin molecules, suggesting that termination of fluorescence occurred by two different paths, unexpected from standard kinetic schemes of myosin ATPase. In addition, molecules of the same myosin isoform showed substantial intermolecular variability in fluorescence lifetimes. From kinetic modeling of our two fluorescence lifetime populations and earlier solution data, we propose two conformers of the active site of myosin, one that allows the complete ATPase cycle and one that dissociates ATP uncleaved. Statistical analysis and Monte Carlo simulations showed that the intermolecular variability in our studies is essentially due to the stochastic behavior of enzyme kinetics and the limited number of ATP binding events detectable from an individual myosin molecule with little room for static variation among individual molecules, previously described for other enzymes.

The interaction between microtubules and actin filaments impacts many processes during plant growth and development including cell division and expansion. Despite numerous reports of co-localization between the two filament types in the past, only recently plant kinesins with a calponin-homology domain (KCH) were identified as putative dynamic cross-linkers. OsKCH1, a KCH from rice, has been described to interact with cortical microtubules and actin filaments both in vivo and in vitro. However, it remained unsolved whether this interaction is static or dynamic. Here, we show that OsKCH1 drives the active sliding of actin filaments along microtubules in vitro. We found that the sliding velocities corresponded to the velocities of microtubules propelled along OsKCH1 immobilized on glass substrates. This suggests that the motor interacts statically with actin filaments and dynamically with microtubules. We propose that kinesins with a calponin-homology domain play an essential role in the dynamic interaction between microtubules and actin filaments in plant cells.

Isopolar arrays of aligned cytoskeletal filaments are components in a number of designs of hybrid nanodevices incorporating biomolecular motors. For example, a combination of filament arrays and motor arrays can form an actuator or a molecular engine resembling an artificial muscle. Here, isopolar arrays of microtubules are fabricated by flow alignment, and their quality is characterized by their degree of alignment. We find, in agreement with our analytical models, that the degree of alignment is ultimately limited by thermal forces, while the kinetics of the alignment process are influenced by the flow strength, the microtubule stiffness, the gliding velocity, and the tip length. Strong flows remove microtubules from the surface and reduce the filament density, suggesting that there is an optimal flow strength for the fabrication of ordered arrays.

The protein dynein 'walks' along filaments to transport various cargoes within the cell. Two studies reveal that, unlike other motor proteins, dynein's steps are not strictly coordinated.

Cytoplasmic dynein is a microtubule-based molecular motor that participates in a multitude of cell activities, from cell division to organelle transport. Unlike kinesin and myosin, where different tasks are performed by highly specialized members of these superfamilies, a single form of the dynein heavy chain is utilized for different functions. This versatility demands an extensive regulation of motor function. Using an improved application of an optical trap, we were now able to demonstrate that cytoplasmic dynein can generate a discrete power stroke as well as a processive walk in either direction; i.e., towards the plus- or towards the minus-end of a microtubule. Thus, dynein’s motor functions can be described by four basic modes of motion: processive and nonprocessive movement, and movement in the forward and reverse directions. Importantly, these four modes of movement can be controlled by two switches. One switch, based on phosphate, determines the directionality of movement. The second switch, depending on magnesium, converts cytoplasmic dynein from a nonprocessive to a processive motor. The two switches can be triggered separately or jointly by changing concentrations of phosphate and magnesium in the local environment. The control of four modes of movement by two switches has major implications for our understanding of the cellular functions and regulation of cytoplasmic dynein. Based on recent studies of dynein’s structure we are able to draw new conclusions on cytoplasmic dynein’s stepping mechanism.

motor protein can be made to walk in either direction along a filamentous track by adjusting the concentration of calcium ions in the surrounding solution.

Kinesin-1 plays a major role in anterograde transport of intracellular cargo along microtubules. Currently, there is an ongoing debate of whether α-tubulin K40 acetylation directly enhances the velocity of kinesin-1 and its affinity to the microtubule track. We compared motor motility on microtubules reconstituted from acetylated and deacetylated tubulin. For both, single- and multi-motor in vitro motility assays, we demonstrate that tubulin acetylation alone does not affect kinesin-1 velocity and run length.

Cytoplasmic dynein is not a classical duty ratio motor The mechanical cross bridge cycle of cytoplasmic dynein has often been compared with that of myosin. Cytoplasmic dynein and myosin 5 are both organelle bound motors responsible for transport of their cargo over a long distance. It has also been demonstrated that myosin 5 is a processive motor and that its processivity is regulated by the duty ratio; i.e., the ratio between bound and free state during the cross bridge cycle. As the binding of ATP leads to the dissociation of the motor filament complex a decrease of the ATP concentration results in an increased duty ratio. It was the aim of our study to investigate whether the processivity of cytoplasmic dynein is also governed by the duty ratio. With the optical trap single molecule measurements were carried out in a two bead dumbbell approach. At 100 μM ATP consecutive 8 nm steps up to stall force were observed often resulting in repeated 8nm forward and backward steps at stall force. To our surprise however, at low ATP concentrations dynein underwent only single binding events with an apparent working stroke of 8nm. These results can not be explained by a simple one site model for ATP binding where processivity is governed by the duty ratio. In contrast to myosin, dynein possesses two essential ATP binding sites. At low ATP concentrations we hypothesis that only one of the ATP binding sites is occupied, thereby resulting in a loss of processivity.