The semi-hydrogenation of alkynes is crucial in the chemical industry, yet developing catalysts with both high activity and selectivity remains challenging. In this work, we introduced a self-supported method to fabricate a palladium-based nanocatalyst by in-situ reduction of Pd(II) on copper-based coordination polymers (Cu(I)-PNS) without external reducing agents. The resulting Pd/Cu(I)-PNS catalyst demonstrated exceptional efficiency and 94.8 % selectivity for styrene in the semi-hydrogenation of phenylacetylene, with no over-hydrogenation. Our findings highlight that the metal-organic interface enhances the catalyst's selectivity by weakening styrene adsorption due to electronic modification. Additionally, the catalyst exhibited superior stability and activity, showing potential for various alkynes. This approach offers a direct and efficient strategy for creating highly selective palladium-based nanocatalysts for industrial applications.

The catalytic performance of a catalyst is significantly influenced by its ability to activate hydrogen. Constructing frustrated Lewis pairs (FLPs) with the capacity for hydrogen dissociation on non-reducible supports remains a formidable challenge. Herein, we employed a straightforward method to synthesize a layered AlOOH featuring abundant OH defects suitable for constructing solid surface frustrated Lewis pair (ssFLP). The results indicated that the AlOOH-80 (synthesized at 80 degrees C) possessed an appropriate crystalline structure conducive to generating numerous OH defects, which facilitated the formation of ssFLP. This was further evidenced by the minimal water adsorption in the AlOOH-80, inversely correlated with the quantity of defects in the catalyst. As expected, the Pd loaded onto AlOOH (Pd/AlOOH-80) exhibited excellent catalytic activity in hydrogenation reactions, attributed to abundant defects available for constructing ssFLP. Remarkably, the Pd/AlOOH-80 catalyst, with larger-sized Pd nanoparticles, displayed notably superior activity compared to commercial Pd/Al2O3 and Pd/C, both featuring smaller-sized Pd nanoparticles. Evidently, under the influence of ssFLP, the size effect of Pd nanoparticles did not dominate, highlighting the pivotal role of ssFLP in enhancing catalytic performance. This catalyst also exhibited exceptionally high stability, indicating its potential for industrial applications. The superior catalytic performance of Pd nanocatalysts in AlOOH-80 is attributed to solid surface frustrated Lewis pairs (ssFLP), which enhance hydrogen gas dissociation, improve Pd nanocatalyst hydrogenation, and result in high catalytic activity of Pd/AlOOH-80.

The interfacial sites of metal-support interface have been considered to be limited to the atomic region of metal/support perimeter, despite their high importance in catalysis. By using single-crystal surface and nanocrystal as model catalysts, we now demonstrate that the overgrowth of atomic-thick Cu 2 O on metal readily creates a two-dimensional (2D) microporous interface with Pd to enhance the hydrogenation catalysis. With the hydrogenation confined within the 2D Cu 2 O/Pd interface, the catalyst exhibits outstanding activity and selectivity in the semi-hydrogenation of alkynes. Alloying Cu(0) with Pd under the overlayer is the major contributor to the enhanced activity due to the electronic modulation to weaken the H adsorption. Moreover, the boundary or defective sites on the Cu 2 O overlayer can be passivated by terminal alkynes, reinforcing the chemical stability of Cu 2 O and thus the catalytic stability toward hydrogenation. The deep understanding allows us to extend the interfacial sites far beyond the metal/support perimeter and provide new vectors for catalyst optimization through 2D interface interaction.

Size effect plays a crucial role in catalytic hydrogenation. The highly dispersed ultrasmall clusters with a limited number of metal atoms are one candidate of the next generation catalysts that bridge the single-atom metal catalysts and metal nanoparticles. However, for the unfavorable electronic property and their interaction with the substrates, they usually exhibit sluggish activity. Taking advantage of the small size, their catalytic property would be mediated by surface binding species. The combination of metal cluster coordination chemistry brings new opportunity. CO poisoning is notorious for Pt group metal catalysts as the strong adsorption of CO would block the active centers. In this work, we will demonstrate that CO could serve as a promoter for the catalytic hydrogenation when ultrasmall Pd clusters are employed. By means of DFT calculations, we show that Pdn n=2‐147 clusters display sluggish activity for hydrogenation due to the too strong binding of hydrogen atom and reaction intermediates thereon, whereas introducing CO would reduce the binding energies of vicinal sites, thus enhancing the hydrogenation reaction. Experimentally, supported Pd2CO catalysts are fabricated by depositing preestablished [Pd2(μ-CO)2Cl4]2- clusters on oxides and demonstrated as an outstanding catalyst for the hydrogenation of styrene. The promoting effect of CO is further verified experimentally by removing and reintroducing a proper amount of CO on the Pd cluster catalysts.

Catalytic hydrogenation is one of the backbones of the chemical industry. Controlling the reaction behaviour of the activated hydrogen species over oxide-supported metal catalysts is essential. Aside from the expected addition to substrates, the activated hydrogen species would also destroy the active structures. Here we show that, with the assistance of alkali cations, the atomically dispersed Ru(III) on Al2O3 exhibits enhanced performance in the hydrogenation of a broad range of substrates. The alkali cations facilitate the hydrogenation mediated by heterolytic hydrogen species, which not only restrain the hydride species from migrating to interfacial oxygen, thus suppressing the reduction and aggregation of ruthenium, but also stabilize the negatively charged transition states and intermediates through enhanced Columbic attraction. Distinctively, an inverse H/D isotope effect related to H-2 splitting as the rate-determining step over the atomically dispersed ruthenium-catalysed hydrogenation is predicted and confirmed.

Metal-support interaction is one of the most important parameters in controlling the catalysis of supported metal catalysts. Silica, a widely used oxide support, has been rarely reported as an effective support to create active metal-support interfaces for promoting catalysis. In this work, by coating Cu microparticles with mesoporous SiO 2 , we discover that Cu/SiO 2 interface creates an exceptional effect to promote catalytic hydrogenation of esters. Both computational and experimental studies reveal that Cu–H δ− and SiO–H δ+ species would be formed at the Cu–O–SiO x interface upon H 2 dissociation, thus promoting the ester hydrogenation by stablizing the transition states. Based on the proposed catalytic mechanism, encapsulting copper phyllosilicate nanotubes with mesoporous silica followed by hydrogen reduction is developed as an effective method to create a practical Cu nanocatalyst with abundant Cu-O-SiO x interfaces. The catalyst exhibits the best performance in the hydrogenation of dimethyl oxalate to ethylene glycol among all reported Cu catalysts.

We demonstrated that acetylene was a unique reducing agent for aqueous synthesis of ultrasmall Pt nanoparticles (NPs) supported on carbon nanotube (CNT) with high stability. Multiple techniques including X-ray absorption fine structure (XAFS) were employed to fully characterize this Pt catalyst. The in-situ generated olefins from acetylene closely wrapped the Pt NPs, and turned into a very thin carbon shell in the subsequent calcination step. The carbon shell not only endowed the Pt NPs with extraordinary thermal stability, but also significantly improved the catalytic selectivity in hydrogenation of halogenated nitrobenzene by eliminating the dehalogenation reaction. Also, the acetylene-mediated preparation method is readily scalable due to its convenience and environmental friendliness.

Attaining high activity with high selectivity at low temperature is challenging in the selective hydrogenation of phenol to cyclohexanone due to its high activation energy (Ea, 55–70 kJ/mol). Here we report a simple and efficient strategy for phenol hydrogenation catalyzed by Pd in aqueous phase at 30 °C by introducing air to promote the catalysis. With the assistance of air, >99% conversion and >99% selectivity were achieved over Pd(111)/Al2O3 with an overall turnover frequency (TOF) of 621 h−1, ~80 times greater than that of the state-of-art Pd catalyst at 30 °C. Mechanism studies revealed that phenol was activated to generate phenoxyl radicals. The radicals were yielded from the reaction between phenol and hydroxyl radicals in the presence of hydrogen, oxygen and protic solvent on Pd. The phenoxyl pathway resulted in a low apparent Ea (8.2 kJ/mol) and thus high activity. More importantly, this strategy of activating substrate by air can be adapted to other Pd based catalysts, offering a new thinking for the rational design of cyclohexanone production in industry.

A general strategy, using mixed ligands, is utilized to synthesize atomically precise, intrinsically chiral nanocluster [Ag78(DPPP)6(SR)42] (Ag78) where DPPP is the achiral 1,3-bis(diphenyphosphino)propane and SR = SPhCF3. Ag78 crystallizes as racemates in a centric space group. Using chiral diphosphines BDPP = 2,4-bis(diphenylphosphino)pentane, the enantiomeric pair [Ag78(R/S-BDPP)6(SR)42] can be prepared with 100% optical purity. The chiral diphosphines gives rise to, separately, two asymmetric surface coordination motifs composed of tetrahedral R3PAg(SR)3 moieties. The flexible nature of C-C-C angles between the two phosphorus atoms restricts the relative orientation of the tetrahedral R3PAg(SR)3 moieties, thereby resulting in the enantiomeric selection of the intrinsic chiral metal core. This proof-of-concept strategy raises the prospect of enantioselectively synthesizing optically pure, atomically precise chiral noble metal nanoclusters for specific applications.

The electrochemical conversion of CO2 and H2O into syngas using renewably generated electricity is an attractive approach to simultaneously achieve chemical fixation of CO2 and storage of renewable energy. Developing cost-effective catalysts for selective electroreduction of CO2 into CO is essential to the practical applications of the approach. We report a simple synthetic strategy for the preparation of ultrathin Cu/Ni(OH)2 nanosheets as an excellent cost-effective catalyst for the electrochemical conversion of CO2 and H2O into tunable syngas under low overpotentials. These hybrid nanosheets with Cu(0)-enriched surface behave like noble metal nanocatalysts in both air stability and catalysis. Uniquely, Cu(0) within the nanosheets is stable against air oxidation for months because of the presence of formate on their surface. With the presence of atomically thick ultrastable Cu nanosheets, the hybrid Cu/Ni(OH)2 nanosheets display both excellent activity and selectivity in the electroreduction of CO2 to CO. At a low overpotential of 0.39 V, the nanosheets provide a current density of 4.3 mA/cm2 with a CO faradaic efficiency of 92%. No decay in the current is observed for more than 22 hours. The catalysts developed in this work are promising for building low-cost CO2 electrolyzers to produce CO.

Ultrathin PtCu alloy nanosheets are synthesized by a facile, one-pot, templateless hydrothermal method with the use of carbon monoxide (CO) as the capping agent. Due to their unique structure and possible synergetic effect, the ultrathin nanosheets show higher catalytic activity in hydrogen evolution and hydrogenation reactions. The developed method is also expected to generate exciting opportunities in creating ultrathin nanostructures with a wide range of alloy compositions for various catalytic applications.

Determining the structures of nanoparticles at atomic resolution is vital to understand their structure–property correlations. Large metal nanoparticles with core diameter beyond 2 nm have, to date, eluded characterization by single-crystal X-ray analysis. Here we report the chemical syntheses and structures of two giant thiolated Ag nanoparticles containing 136 and 374 Ag atoms (that is, up to 3 nm core diameter). As the largest thiolated metal nanoparticles crystallographically determined so far, these Ag nanoparticles enter the truly metallic regime with the emergence of surface plasmon resonance. As miniatures of fivefold twinned nanostructures, these structures demonstrate a subtle distortion within fivefold twinned nanostructures of face-centred cubic metals. The Ag nanoparticles reported in this work serve as excellent models to understand the detailed structure distortion within twinned metal nanostructures and also how silver nanoparticles can span from the molecular to the metallic regime.

Demonstrated herein are the preparation and crystallographic characterization of the family of fcc silver nanoclusters from Nichol's cube to Rubik's cube and beyond via ligand-control (thiolates and phosphines in this case). The basic building block is our previously reported fcc cluster [Ag14(SPhF2)12(PPh3)8] (1). The metal frameworks of [Ag38(SPhF2)26(PR'3)8] (22) and [Ag63(SPhF2)36(PR'3)8]+ (23), where HSPhF2 = 3,4-difluorothiophenol and R' = alkyl/aryl, are composed of 2 × 2 = 4 and 2 × 2 × 2 = 8 metal cubes of 1, respectively. All serial clusters share similar surface structural features. The thiolate ligands cap the six faces and the 12 edges of the cube (or half cube) while the phosphine ligands are terminally bonded to its eight corners. On the basis of the analysis of the crystal structures of 1, 22, and 23, we predict the next "cube of cubes" to be Ag172(SR)72(PR'3)8] (33), in the evolution of growth of this cluster sequence.

Electrochemical partial reforming of organics provides an alternative strategy to produce valuable organic compounds while generating H2 under mild conditions. In this work, highly selective electrochemical reforming of ethanol into ethyl acetate is successfully achieved by using ultrathin Co3O4 nanosheets with exposed (111) facets as an anode catalyst. Those nanosheets were synthesized by a one-pot, templateless hydrothermal method with the use of ammonia. NH3 was demonstrated critical to the overall formation of ultrathin Co3O4 nanosheets. With abundant active sites on Co3O4 (111), the as-synthesized ultrathin Co3O4 nanosheets exhibited enhanced electrocatalytic activities toward water and ethanol oxidations in alkaline media. More importantly, over the Co3O4 nanosheets, the electrooxidation from ethanol to ethyl acetate was so selective that no other oxidation products were yielded. With such a high selectivity, an electrolyzer cell using Co3O4 nanosheets as the anode electrocatalyst and Ni-Mo nanopowders as the cathode electrocatalyst has been successfully built for ethanol reforming. The electrolyzer cell was readily driven by a 1.5 V battery to achieve the effective production of both H2 and ethyl acetate. After the bulk electrolysis, about 95% of ethanol was electrochemically reformed into ethyl acetate. This work opens up new opportunities in designing a material system for building unique devices to generate both hydrogen and high-value organics at room temperature by utilizing electric energy from renewable sources.

Tuning the electronic structure of heterogeneous metal catalysts has emerged as an effective strategy to optimize their catalytic activities. By preparing ethylenediamine-coated ultrathin platinum nanowires as a model catalyst, here we demonstrate an interfacial electronic effect induced by simple organic modifications to control the selectivity of metal nanocatalysts during catalytic hydrogenation. This we apply to produce thermodynamically unfavourable but industrially important compounds, with ultrathin platinum nanowires exhibiting an unexpectedly high selectivity for the production of N-hydroxylanilines, through the partial hydrogenation of nitroaromatics. Mechanistic studies reveal that the electron donation from ethylenediamine makes the surface of platinum nanowires highly electron rich. During catalysis, such an interfacial electronic effect makes the catalytic surface favour the adsorption of electron-deficient reactants over electron-rich substrates (that is, N-hydroxylanilines), thus preventing full hydrogenation. More importantly, this interfacial electronic effect, achieved through simple organic modifications, may now be used for the optimization of commercial platinum catalysts.

An intermetallic nanocluster containing 44 metal atoms, Au24Ag20(2-SPy)4(PhC≡C)20Cl2, was successfully synthesized and structurally characterized by single-crystal analysis and density funtional theory computations. The 44 metal atoms in the cluster are arranged as a concentric three-shell Au12@Ag20@Au12 Keplerate structure having a high symmetry. For the first time, the co-presence of three different types of anionic ligands (i.e., phenylalkynyl, 2-pyridylthiolate, and chloride) was revealed on the surface of metal nanoclusters. Similar to thiolates, alkynyls bind linearly to surface Au atoms using their σ-bonds, leading to the formation of two types of surface staple units (PhC≡C-Au-L, L = PhC≡C(-) or 2-pyridylthiolate) on the cluster. The co-presence of three different surface ligands allows the site-specific surface and functional modification of the cluster. The lability of PhC≡C(-) ligands on the cluster was demonstrated, making it possible to keep the metal core intact while removing partial surface capping. Moreover, it was found that ligand exchange on the cluster occurs easily to offer various derivatives with the same metal core but different surface functionality and thus different solubility.

An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

A novel nanoparticulate polyacetylene-supported Pd(II) catalyst (NP-Pd(II)) for use in the aqueous Suzuki-Miyaura cross coupling reaction was successfully synthesized by simply treating an aqueous solution of PdCl42– with acetylene under ambient conditions. Electron microscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy and X-ray absorption spectroscopy were employed to characterize the NP-Pd(II) structure in detail. These analyses demonstrated that the Pd atoms in the NP-Pd(II) were present as Pd(II) and were coordinated with both the Cl atoms and the C=C bonds of the polyacetylene. Both the homogeneous distribution of the Pd(II) along the polyacetylene backbone and the aggregation of the NP-Pd(II) in solution work in conjunction to make this material an ideal catalyst, combining the advantages of both homogeneous and heterogeneous catalysts.

CO confinement strategy for ultrathin Rh nanosheets: CO is introduced as a confining agent to regulate the anisotropic growth of unique 2D structure. The single-crystalline Rh nanosheets have a thickness of three to five atomic layers and tunable edge length ranging from 500 to 1300 nm. By understanding the formation mechanism, surface-clean Rh nanosheets are also prepared and display better catalytic performance that their surfactant-capped nanosheets.