Highly sensitive airborne virus monitoring is critical for preventing and containing epidemics. However, the detection of airborne viruses at ultra-low concentrations remains challenging due to the lack of ultra-sensitive methods and easy-to-deployment equipment. Here, we present an integrated microfluidic cartridge that can accurately detect SARS-COV-2, Influenza A, B, and respiratory syncytial virus with a sensitivity of 10 copies/mL. When integrated with a high-flow aerosol sampler, our microdevice can achieve a sub-single-copy spatial resolution of 0.83 copies/m3 for airborne virus surveillance with an air flow rate of 400 L/min and a sampling time of 30 minutes. We then designed a series of virus-in-aerosols monitoring systems (RIAMs), including versions of a multi-site sampling RIAMs (M-RIAMs), a stationary real-time RIAMs (S-RIAMs), and a roaming real-time RIAMs (R-RIAMs) for different application scenarios. Using M-RIAMs, we performed a comprehensive evaluation of 210 environmental samples from COVID-19 patient wards, including 30 aerosol samples. The highest positive detection rate of aerosol samples (60%) proved the aerosol-based SARS-CoV-2 monitoring represents an effective method for spatial risk assessment. The detection of 78 aerosol samples in real-world settings via S-RIAMs confirmed its reliability for ultra-sensitive and continuous airborne virus monitoring. Therefore, RIAMs shows the potential as an effective solution for mitigating the risk of airborne virus transmission. Effective surveillance of respiratory virus particles in air requires highly sensitive tools that can produce timely and accurate results. Here, the authors develop a device for detection of four respiratory viruses in air with high spatial viral resolution and test it in different settings.

As drug-induced hepatotoxicity represents one of the most common causes of drug failure, three-dimensional (3D) in vitro liver platforms represent a fantastic toolbox to predict drug toxicity and thus reduce in vivo animal studies and lessen drug attrition rates. The aim of this study is to establish a functional porcine hepatocyte culture using a biofunctionalized 3D inverted colloidal crystal (ICC) hydrogel platform. The performances of non-adhesive bare poly(ethylene glycol)diacrylate (PEGDA) ICCs and PEGDA ICCs coated with either collagen type I or fibronectin have been investigated. Porcine hepatocytes viability, morphology, hepatic-specific functions and patterns of gene expression have been evaluated over a period of two weeks in culture to test diclofenac, a well-known hepatotoxic drug. Interestingly, cells in the fibronectin-functionalized scaffold exhibit different aggregation patterns and maintain better liver-specific function than those in bare ICCs and in collagen functionalized scaffold. We concluded that the 3D cell culture environment and the presence of extracellular matrix (ECM) proteins, especially fibronectin, facilitate hepatocyte viability and maintenance of the liver-specific phenotype in vitro, and enable us to predict hepatotoxicity.

Deferoxamine (DFO) to treat iron overload (IO) has been limited by toxicity issues and short circulation times and it would be desirable to prolong circulation to improve non-transferrin bound iron (NTBI) chelation. In addition, DFO is currently unable to efficiently target the large pool of iron in the liver and spleen. Nanogel-Deferoxamine conjugates (NG-DFO) can prove useful as a model to investigate the pharmacokinetic (PK) properties and biodistribution (BD) behavior of iron-chelating macromolecules and their overall effect on serum ferritin levels. NG-DFO reduced the cytotoxicity of DFO and significantly reduced cellular ferritin levels in IO macrophages in vitro. PK/BD studies in normal rats revealed that NG-DFO displayed prolonged circulation and preferential accumulation into the liver and spleen. IO mice treated with NG1-DFO presented significantly lower levels of serum ferritin compared to DFO. Total renal and fecal elimination data point to the need to balance prolonged circulation with controlled degradation to accelerate clearance of iron-chelating macromolecules.

In this study, we constructed a microporous hydrogel scaffold with hexagonally packed interconnected cavities and extracellular matrix (ECM)-functionalized interior surface, and systematically investigated the hepatic differentiation of human adipose-derived mesenchymal stem cells (hAD-MSCs) under the influence of three key factors: three-dimensional (3D) geometry, ECM presence, and coculture with hepatocyte-derived cell line. Results confirmed that (i) hepatic differentiation of hAD-MSC is more efficient in a 3D microporous scaffold than in 2D monolayer culture; (ii) the presence of both ECM components (fibronectin and collagen-I) in the scaffold is superior to collagen-I only, highlighting the importance of fibronectin; and (iii) coculture with Huh-7.5 hepatocyte-derived cells promoted liver-specific functions of the hAD-MSC-derived hepatocytes. The optimized differentiation process only took 21 days to complete, a time length that is shorter or at least comparable to previous reports, and more importantly, yielded an albumin production more than 10-fold higher than conventional 2D culture. Our approach of optimizing hAD-MSC hepatic differentiation could provide a potential solution to the challenges such as hepatocyte transplantation or the establishment of human physiologically relevant liver models in vitro.

It is well known that a three-dimensional (3D) culture environment and the presence of extracellular matrix (ECM) proteins facilitate hepatocyte viability and maintenance of the liver-specific phenotype in vitro . However, it is not clear whether specific ECM components such as collagen or fibronectin differentially regulate such processes, especially in 3D scaffolds. In this study, a series of ECM-functionalized inverted colloidal crystal (ICC) microporous scaffolds were fabricated and their influence on Huh-7.5 cell proliferation, morphology, hepatic-specific functions, and patterns of gene expression were compared. Both collagen and fibronectin promoted albumin production and liver-specific gene expression of Huh-7.5 cells, compared with the bare ICC scaffold. Interestingly, cells in the fibronectin-functionalized scaffold exhibited different aggregation patterns to those in the collagen-functionalized scaffold, a variation that could be related to the distinct mRNA expression levels of cell adhesion-related genes. Based on these results, we can conclude that different ECM proteins, such as fibronectin and collagen, indeed play distinct roles in the phenotypic regulation of cells cultured in a 3D environment.

With mounting evidence that nanomaterials can trigger adverse innate immune responses such as complement activation, there is increasing attention to the development of strategies that mask the complement-activating properties of nanomaterials. The current gold standard to reduce complement activation of nanomaterials is the covalent attachment of polymer coatings on nanomaterial surfaces, even though this strategy provides only moderate protection against complement activation. Akin to protein coronas that form on nanomaterial surfaces in physiological fluids, noncovalent strategies based on protein adsorption would offer a simplified, biomimetic approach to mitigate complement activation. Herein, we demonstrate that precoating graphene-based nanomaterials with purified, natural proteins enables regulatory control of nanomaterial-triggered complement activation. When the graphene-based nanomaterials were coated with complement factor H, nearly complete protection (>90% reduction) against complement activation (a "stealth effect") was achieved. By contrast, coating the nanomaterials with a passivating layer of bovine or human serum albumins achieved moderate protection (∼40% reduction), whereas immunoglobulin G amplified complement activation by several-fold. Taken together, our results demonstrate that surface-bound factor H, as well as serum albumins, can prevent graphene oxide-triggered complement activation, thereby offering a facile approach to inhibit complement activation completely down to naturally occurring levels.

Iron overload can increase cellular oxidative stress levels due to formation of reactive oxygen species (ROS); untreated, it can be extremely destructive to organs and fatal to patients. Since elevated oxidative stress levels are inherent to the condition in such patients, oxidation-induced degradable nanogels for iron chelation were rationally designed by simultaneously polymerizing oxidation-sensitive host-guest crosslinkers between β-cyclodextrin (β-CD) and ferrocene (Fc) and iron chelating moieties composed of deferoxamine (DFO) into the final gel scaffold in reverse emulsion reaction chambers. UV-Vis absorption and atomic absorption spectroscopy (AAS) was used to verify iron chelating capability of nanogels. These materials can degrade into smaller chelating fragments at rates proportional to the level of oxidative stress present. Conjugating DFO reduces the cytotoxicity of the chelator in the macrophage cells. Importantly, the nanogel can effectively reduce cellular ferritin expression in iron overloaded cells and regulate intracellular iron levels at the same time, which is important for maintaining a homeostatic level of this critical metal in cells.

The formation of spherical aggregates during the growth of cell population has long been observed under various conditions. We observed the formation of such aggregates during proliferation of Huh-7.5 cells, a human hepatocarcinoma cell line, in a microfabricated low-adhesion microwell system (SpheroFilm; formed of mass-producible silicone elastomer) on the length scales up to 500 μm. The cell proliferation was also tracked with immunofluorescence staining of F-actin and cell proliferation marker Ki-67. Meanwhile, our complementary 3D Monte Carlo simulations, taking cell diffusion and division, cell-cell and cell-scaffold adhesion, and gravity into account, illustrate the role of these factors in the formation of spheroids. Taken together, our experimental and simulation results provide an integrative view of the process of spheroid formation for Huh-7.5 cells.

Although Cu complexes have been investigated as anticancer agents, there has been no description of Cu itself as a cancer killing agent. A stealth liposomal Cu formulation (LpCu) was studied in vitro and in vivo. LpCu was evaluated in prostate cancer origin PC-3 cells by a metabolic cytotoxicity assay, by monitoring ROS, and by flow cytometry. LpCu efficacy was evaluated in vivo using intratumoral and intravenous injections into mice bearing PC-3 xenograft tumors. Toxicology was assessed by performing hematological and blood biochemistry assays, and tissue histology and Cu distribution was investigated by elemental analysis. LpCu and free Cu salts displayed similar levels of cell metabolic toxicity and ROS. Flow cytometry indicated that the mechanisms of cell death were both apoptosis and necrosis. Animals injected i.t. with 3.5 mg/kg or i.v. with 3.5 and 7.0 mg/kg LpCu exhibited significant tumor growth inhibition. Kidney and eye were the main organs affected by Cu-mediated toxicities, but spleen and liver were the major organs of Cu deposition. LpCu was effective at reducing tumor burden in the xenograft prostate cancer model. There was histological evidence of Cu toxicity in kidneys and eyes of animals treated at the maximum tolerated dose of LpCu 7.0 mg/kg.

PURPOSE:The formulation of histone deacetylase inhibitors (HDACi) is challenging due to poor water solubility and rapid elimination of drugs in vivo. This study investigated the effects of complexing iron (Fe3+) to the HDACi suberoylanilide hydroxamic acid (SAHA) and LAQ824 (LAQ) prior to their encapsulation into PEGylated liposomes, and investigated whether this technique could improve drug solubility, in vitro release and in vivo pharmacokinetic (PK) properties. METHODS. The reaction stoichiometry, binding constants and solubility were measured for Fe complexes of SAHA and LAQ. The complexes were passively encapsulated into PEGylated liposomes and characterized by size distribution, zeta-potential, encapsulation efficiency (EE), and in vitro drug release studies. PC-3 cells were used to verify the in vitro anticancer activity of the formulations. In vivo pharmacokinetic properties of liposomal LAQ-Fe (L-LAQ-Fe) was evaluated in rats. RESULTS. SAHA and LAQ form complexes with Fe at 1:1 stoichiometric ratio, with a binding constant on the order of 104 M-1. Fe complexation improved the aqueous solubility and the liposomal encapsulation efficiency of SAHA and LAQ (29-35% EE, final drug concentration > 1 mM). Liposomal encapsulated complexes (L-HDACi-Fe) exhibited sustained in vitro release properties compared to L-HDACi but cytotoxicity on PC-3 cells was comparable to free drugs. The PK of L-LAQ-Fe revealed 15-fold improvement in the plasma t1/2 (12.11 h)and 211-fold improvement in the AUC∞ (105.7 µg·h/ml) compared to free LAQ (0.79 h, 0.5 µg·h/ml). Similarly, the plasma t1/2 of Fe was determined to be 11.83 h in a separate experiment using radioactive Fe-59. The majority of Fe-59 activity was found in liver and spleen of rats and correlates with liposomal uptake by the mononuclear phagocyte system. CONCLUSIONS. We have demonstrated that encapsulation of Fe complexes of HDACi into PEGylated liposomes can improve overall drug aqueous solubility, in vitro release and in vivo pharmacokinetic properties.

5,6-Difluorobenzo[c][1,2,5]thiadiazole (FBT)-based conjugated donor–acceptor (D-A) polymers with straight and branched side chains were synthesized via Stille-coupling copolymerization to study their physical, optoelectronic and photovoltaic properties. The results show that both the nature of pendant side chains and the electron acceptor strength of the acceptor moiety of D–A polymers have critical impacts on material and photovoltaic properties. Better π–π stacking of polymer backbones enabled by appropriate substituents such as fluorine atoms and branched alkyl chains leads to a reasonably high power conversion efficiency of over 6% when the polymer is utilized as a donor material with PC71BM as an active layer in bulk heterojunction solar cells.

Herein, we demonstrate for the first time the use of hydrogel-in-liposome nanoparticles (lipogels) as a promising drug delivery vehicle for the active encapsulation of the anticancer drug 17-DMAPG, a geldanamycin (GA) derivative. This model drug was chosen due to its improved aqueous solubility (4.6 mg/ml) compared to the parent GA (<0.01 mg/ml), and presence of a tertiary amine which readily protonates at low pH. For the design of lipogels, a PAA hydrogel core was formed inside liposomes through UV-initiated DEAP activation and polymerization of AA and BA. We have demonstrated here that electrostatic interactions between drug and gel are critical for active encapsulation and sustained release of 17-DMAPG. We found that optimal loading conditions could be obtained (88% loading efficiency) through control of pH, temperature and incubation time. Dramatic sustained drug release from lipogels was achieved independent of the external solution pH (ca. 54 h to 50% drug release) and confirmed that the lipid bilayer was intact in the presence of the gel core. In vitro cell culture studies revealed that at the highest concentration tested, which corresponded to approximately 0.4 mg/ml of material, lipogels did not exert cytotoxicity to cells.

The title process allows the synthesis of various α‐aryl substituted α,β‐unsaturated carbonyl compounds.

Efficient palladium-catalyzed cross-coupling reactions of alpha-diazocarbonyl compounds and arylboronic acids or aryl halides have been developed. The reaction proceeds smoothly for a range of diazo compounds, boronic acids, and halides. The coupling reaction conditions tolerate various substituents on the aromatic rings of the substrates, such as chloro, fluoro, acyl, oxo, ester, and nitro groups. This coupling reaction constitutes a novel access to alpha-aryl-substituted alpha,beta-unsaturated carbonyl compounds. Mechanistically, palladium-carbene is supposed to be the key intermediate; its formation is followed by migratory insertion of an aryl group to the carbenic carbon of the palladium-carbene complex and subsequent beta-hydride elimination. Kinetic isotope effect (KIE) data measured for intra- and intermolecular competition experiments suggest that beta-hydride elimination is not involved in the rate-determining step.

Pd(pph(3))(4)-catalyzed reaction between alpha-diazocarbonyl compounds and arylboronic acids leads to the formation of cross-coupling products in good yields.

AbstractChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable via the “References” option.