RNAs are involved in many functional roles in the cell, and this functional diversity is predicated on RNAs adopting requisite three-dimensional architectures. Preparing such "natively folded" RNAs with a homogeneous population is sometimes problematic for structural or enzymatic studies. Yet, standard methods for RNA preparations denature the RNA and create a heterogeneous population of conformers. Therefore, preparation of "natively folded" RNAs without going through the process of denaturing and refolding is important to obtain maximal biological function. Here, we present a simple strategy using "click" chemistry to couple biotin to a "caged" photocleavable (PC) guanosine monophosphate (GMP) in high yield. This biotin-PC-GMP is readily accepted by T7 RNA polymerase to transcribe "natively folded" RNAs ranging in size from 27 to 493 nucleotides. This facile strategy allows efficient biotinylation of RNA and provides a traceless means to remove the biotin after the purification. Such preparation of natively folded RNAs should benefit biophysical and therapeutic applications.

C-di-GMP has emerged as a ubiquitous second messenger, which regulates the transition between sessile and motile lifestyles and virulence factor expression in many pathogenic bacteria using both RNA riboswitches and protein effectors. We recently showed that two additional class I c-di-GMP riboswitch aptamers (Ct-E88 and Cb-17B) bind c-di-GMP with nanomolar affinity, and that Ct-E88 RNA binds 2'-F-c-di-GMP 422 times less tightly than class I Vc2 RNA. Based on sequence comparison, it was concluded that the global folds of Ct-E88 and Vc2 RNAs were similar and that differences in ligand binding were probably due to differences in binding site architectures. Herein, we utilized EMSA, aptamer sensing spinach modules, SAXS and 1D NMR titration to study the conformational transitions of Ct-E88. We conclude that whereas the global folds of the bound states of Vc2 and Ct-E88 RNAs are similar, the unbound states are different and this could explain differences in ligand affinities between these class I c-di-GMP riboswitches.

For an organism to survive, it must be able to sense its environment and regulate physiological processes accordingly. Understanding how bacteria integrate signals from various environmental factors and quorum sensing autoinducers to regulate the metabolism of various nucleotide second messengers c-di-GMP, c-di-AMP, cGMP, cAMP and ppGpp, which control several key processes required for adaptation is key for efforts to develop agents to curb bacterial infections. In this review, we provide an update of nucleotide signaling in bacteria and show how these signals intersect or integrate to regulate the bacterial phenotype. The intracellular concentrations of nucleotide second messengers in bacteria are regulated by synthases and phosphodiesterases and a significant number of these metabolism enzymes had been biochemically characterized but it is only in the last few years that the effector proteins and RNA riboswitches, which regulate bacterial physiology upon binding to nucleotides, have been identified and characterized by biochemical and structural methods. C-di-GMP, in particular, has attracted immense interest because it is found in many bacteria and regulate both biofilm formation and virulence factors production. In this review, we discuss how the activities of various c-di-GMP effector proteins and riboswitches are modulated upon c-di-GMP binding. Using V. cholerae, E. coli and B. subtilis as models, we discuss how both environmental factors and quorum sensing autoinducers regulate the metabolism and/or processing of nucleotide second messengers. The chemical syntheses of the various nucleotide second messengers and the use of analogs thereof as antibiofilm or immune modulators are also discussed.

C-di-GMP is a second messenger in bacteria and partly regulates bacterial physiology by binding to class I and II riboswitches. Four class I c-di-GMP riboswitch aptamer candidates, Ct-E88, Cb-17B, Cb-E43 and Cd-630 RNAs, selected from a GEMM RNA sequence motif in the Rfam database, were expressed and experimentally verified to bind to c-di-GMP. The two newly characterized c-di-GMP riboswitches, Ct-E88 and Cb-E43, bound c-di-GMP with nanomolar Kd whereas the affinities of Cb-17B and Cd-630 for c-di-GMP were at least a 100-fold weaker. Interestingly, whereas the three riboswitches (Vc2, Et-E88 and Cb-E43) bound c-di-GMP with similar Kd values, 2'-modified analogs of c-di-GMP differentially bound to these three class I aptamers. For example, 2'-F-c-di-GMP bound Vc2 with a Kd value of 102 nM whereas the Kd value of 2'-F-c-di-GMP-Ct-E88 is 43 μM (422× higher than that for Vc2 RNA), revealing that there are differences in the binding sites of functional class I c-di-GMP riboswitches.

Characterization of the structure and dynamics of nucleic acids by NMR benefits significantly from position specifically labeled nucleotides. Here an E. coli strain deficient in the transketolase gene (tktA) and grown on glucose that is labeled at different carbon sites is shown to facilitate cost-effective and large scale production of useful nucleotides. These nucleotides are site specifically labeled in C1′ and C5′ with minimal scrambling within the ribose ring. To demonstrate the utility of this labeling approach, the new site-specific labeled and the uniformly labeled nucleotides were used to synthesize a 36-nt RNA containing the catalytically essential domain 5 (D5) of the brown algae group II intron self-splicing ribozyme. The D5 RNA was used in binding and relaxation studies probed by NMR spectroscopy. Key nucleotides in the D5 RNA that are implicated in binding Mg2+ ions are well resolved. As a result, spectra obtained using selectively labeled nucleotides have higher signal-to-noise ratio compared to those obtained using uniformly labeled nucleotides. Thus, compared to the uniformly 13C/15N-labeled nucleotides, these specifically labeled nucleotides eliminate the extensive 13C–13C coupling within the nitrogenous base and ribose ring, give rise to less crowded and more resolved NMR spectra, and accurate relaxation rates without the need for constant-time or band-selective decoupled NMR experiments. These position selective labeled nucleotides should, therefore, find wide use in NMR analysis of biologically interesting RNA molecules.

C-di-GMP regulates important processes involved in biofilm formation and virulence factors production in several bacteria. Herein we report a simple fluorescent strategy that allows for the detection of c-di-GMP (as low as 320 nM) using a Vc2 class I riboswitch domain as the sensing region and spinach as the fluorescent reporting module.

C-di-GMP has emerged as a signalling molecule that regulates a variety of processes in several bacteria; therefore there is interest in the development of biotinylated analogs for the identification of binding partners. No detailed study has been done to evaluate if biotinylated analogs of c-di-GMP are capable of binding to c-di-GMP receptors. Herein, we evaluate the binding of commercially available 2'-biotinylated c-di-GMP and phosphorothioate 2'-biotinylated c-di-GMP, prepared via a facile solid-phase synthesis, to several c-di-GMP receptors. Docking, using Autodock vina software, as well as experimental studies of these analogs, with c-di-GMP class I and II riboswitches and binding proteins, reveal that some, but not all, c-di-GMP receptors can tolerate the 2'-modification of c-di-GMP with biotin.

Obtaining homogeneous population of natively folded RNAs is a crippling problem encountered when preparing RNAs for structural or enzymatic studies. Most of the traditional methods that are employed to prepare large quantities of RNAs involve procedures that partially denature the RNA. Here, we present a simple strategy using 'click' chemistry to couple biotin to a 'caged' photocleavable (PC) guanosine monophosphate (GMP) in high yield. This biotin-PC GMP, accepted by T7 RNA polymerase, has been used to transcribe RNAs ranging in size from 27 to 527 nt. Furthermore we show, using an in-gel fluorescence assay, that natively prepared 160 and 175 kDa minimal group II intron ribozymes have enhanced catalytic activity over the same RNAs, purified via denaturing conditions and refolded. We conclude that large complex RNAs prepared by non-denaturing means form a homogeneous population and are catalytically more active than those prepared by denaturing methods and subsequent refolding; this facile approach for native RNA preparation should benefit synthesis of RNAs for biophysical and therapeutic applications.

Recently, there has been an explosion of research activities in the cyclic dinucleotides field. Cyclic dinucleotides, such as c-di-GMP and c-di-AMP, have been shown to regulate bacterial virulence and biofilm formation. c-di-GMP can exist in different aggregate forms, and it has been demonstrated that the polymorphism of c-di-GMP is influenced by the nature of cation that is present in solution. In previous work, polymorphism of c-di-GMP could only be demonstrated at hundreds of micromolar concentrations of the dinucleotide, and it has been a matter of debate if polymorphism of c-di-GMP exists under in vivo conditions. In this Article, we demonstrate that c-di-GMP can form G-quadruplexes at low micromolar concentrations when aromatic molecules such as thiazole orange template the quadruplex formation. We then use this property of aromatic molecule-induced G-quadruplex formation of c-di-GMP to design a thiazole orange-based fluorescent detection of this important signaling molecule. We determine, using this thiazole orange assay on a crude bacterial cell lysate, that WspR D70E (a constitutively activated diguanylate cyclase) is functional in vivo when overexpressed in E. Coli . The intracellular concentration of c-di-GMP in an E. Coli cell that is overexpressed with WspR D70E is very high and can reach 2.92 mM.

The Differential Radial Capillary Action of Ligand Assay (DRaCALA) allows detection of protein interactions with low-molecular weight ligands based on separation of the protein–ligand complex by differential capillary action. Here, we present an application of DRaCALA to the study of nucleic acid–protein interactions using the Escherichia coli cyclic AMP receptor protein (CRP). CRP bound in DRaCALA specifically to 32P-labeled oligonucleotides containing the consensus CRP binding site, but not to oligonucleotides with point mutations known to abrogate binding. Affinity and kinetic studies using DRaCALA yielded a dissociation constant and dissociation rate similar to previously reported values. Because DRaCALA is not subject to ligand size restrictions, whole plasmids with a single CRP-binding site were used as probes, yielding similar results. DNA can also function as an easily labeled carrier molecule for a conjugated ligand. Sequestration of biotinylated nucleic acids by streptavidin allowed nucleic acids to take the place of the protein as the immobile binding partner. Therefore, any molecular interactions involving nucleic acids can be tested. We demonstrate this principle utilizing a bacterial riboswitch that binds cyclic-di-guanosine monophosphate. DRaCALA is a flexible and complementary approach to other biochemical methods for rapid and accurate measurements of affinity and kinetics at near-equilibrium conditions.