Fe-based solid materials are studied here as self-heating catalysts that can convert CO2 into CO via a reverse water-gas shift (RWGS), a key reaction for carbon utilization. We describe the scalable synthesis of Fe nanoparticles capable to be inductively heated to 500-800 degrees C while catalytically active in RWGS. For iron species to develop a dual function as heaters and catalysts, the formation of nonferromagnetic Fe phases under reaction conditions must be avoided. Such phases lead to rapid cooldown of the reactor and the deactivation of the catalyst. Here, the stabilization of the self-heating RWGS catalysts was achieved by adjusting the nanoparticle properties via mesoporous supports, the addition of Co as a promoter, and redox pretreatments. Through extensive operando and in situ characterization, we show the dynamics of self-heating catalytic nanoparticles under reactive atmospheres, as those verified during RWGS reaction and pave the way for other applications in energy-intensive catalytic processes.
Nanoparticles supported on the surface of porous carrier materials are the dominant form of heterogeneous catalysts today. Yet, they suffer from a common deactivation mechanism: the loss of active surface area under industrial use conditions. Deactivation often stems from the sintering of nanoparticles, a mass-transport process whose mechanism and operating length-scale are a topic of controversy. Investigating this process is challenging, requiring not only a behavioral characterization of thousands of individual particles within the spatial confines of a hierarchically structured support but also a characterization of their ensemble behavior and local support interactions. Here, we introduce in situ ptychographic X-ray computed nanotomography as a tool to facilitate this characterization, allowing a local examination of catalysts in their use-geometry under operational-relevant conditions. Applied to methane oxidation over a palladium-on-silica supported catalyst, we reveal two concurrently operating deactivation drivers, short-range ripening and long-range particle migration, each with different temperature and atmosphere dependencies. The latter enables particles to traverse hundreds of nanometers through the support. These observations expand the current understanding of sintering behavior in supported catalysts and demonstrate PXCT's capability to resolve restructuring processes within complex porous materials.
The integration of high-quality SrTiO 3 thin films on silicon substrates is crucial for various applications.
Nanostructured SiOx (0 ≤ x ≤ 2) materials are key for boosting energy density in next-generation Li-ion battery anodes, with the magnesiothermic reduction reaction (MgTR) emerging as a scalable pathway for their production from nanoporous SiO2. In MgTR, SiO2 reacts with Mg at moderate temperatures to form Si and MgO, enabling the preservation of nanostructured features. However, the widespread application of MgTR is hindered by the strong influence of reaction parameters on process dynamics, which leads to the uncontrolled formation of multiple byproducts that not only reduce the Si yield but also require the use of hazardous hydrofluoric acid (HF) for their removal, hampering the synthesis of SiO x due to HF's reactivity with SiO2. Hence, a comprehensive understanding of MgTR dynamics and its interplay with reaction parameters constitutes an essential prerequisite toward the effective synthesis of advanced Si and SiO x nanostructures. In this work, a systematic approach combining a set of independent time-resolved in situ synchrotron X-ray diffraction studies was employed to provide for the first time a comprehensive understanding of MgTR dynamics under varied reaction conditions, including varied SiO2 source (amorphous vs crystalline), different SiO2-to-Mg ratios, and different heating ramps. This approach allowed to unveil a complete picture of MgTR and to identify key conditions to prevent byproduct formation. This advancement marks a critical step toward the large-scale zero-carbon footprint synthesis of Si-based anodes for Li-ion batteries, serving as general guidelines for the controlled synthesis of high-purity Si and SiO x advanced materials.
Mercury pollution poses severe risks to environmental and public health due to its high toxicity and persistence. The use of physical adsorbents for heavy metal cation uptake is a straightforward solution for many applications, but a better fundamental understanding of the mechanism is crucial for rational improvement. We have investigated the adsorption of mercury ions on reduced graphene oxide (rGO) in real time by coupling continuous flow setups with in situ analytical techniques: X-ray absorption spectroscopy (XAS) and electrochemical quartz crystal microbalance with dissipation monitoring (EQCM-D). The microfluidic setup provided a practical and efficient platform for mimicking realistic conditions, requiring minimal sample volumes and enabling continuous flow analysis, while the in situ XAS brought detailed atomic and electronic structural information, allowing for following changes in mercury ion coordination as adsorption proceeded. Similarly, EQCM-D followed the mass changes and viscoelastic properties of the rGO layer under dynamic flow conditions upon adsorption. The approach distinguished chemisorbed from physisorbed mercury cations, revealing a yet undescribed transition between the two forms. This enables a better understanding of the adsorption mechanisms and highlights the benefits of coupling microfluidic systems with advanced in situ techniques.