The interaction of climate and the soil surface during drying periods can lead to the formation of desiccation cracks. Desiccation cracks can alter soil water flux and induce large volumetric deformations, leading to geotechnical problems. For these reasons, the characteristics of desiccation cracks in clayey soils have been widely studied under laboratory conditions, varying different soil properties, boundary conditions, and geometrical configurations. However, the geometrical configurations of the experimental setups and the horizontal size of the soil sample have not been considered. In this paper, the horizontal size of soil samples was varied to assess the effect of horizontal scale on crack characteristics and propagation (degree of cracking, horizontal strains, and fractal dimension). Particle Image Velocimetry was used to obtain the strain data, and the fractal dimensions were determined using the Box Counting method. The results showed a significant influence of the horizontal size of the sample on the magnitude of strains in this research. The fractal dimension was not constant with sample diameter because of the high heterogeneity in crack geometry, which is influenced by sample size. However, a unique relationship was found between fractal dimension and cracking degree.
In different studies on the impact of fuel blends on the performance and polluting emissions of an internal combustion engine, it is necessary to identify some physical and chemical properties that allow understanding of the behavior of the results; however, obtaining such properties requires the use of special equipment that may incur additional costs. In this document, from some experimental tests, it has been possible to obtain the behavior of physical and chemical properties (density, boiling temperature, cetane index, kinematic viscosity, heat values, and adiabatic flame temperature) for different commercial diesel and palm oil Biodiesel blends. Additionally, the data obtained were statistically treated to obtain fit equations that predict the behavior of most of the properties studied for blend percentage values different from those tested.
This study presents a systematic review of control methods for electromagnetic force compensation (EMFC) weighing cells, a technology extensively employed in high-accuracy weighing instruments across various industrial and scientific sectors. The research was conducted following a structured methodology applied to recognized scientific databases, covering publications from the past decade. The analysis identifies trends and recurring approaches in control design aimed at ensuring stability, accuracy, and high dynamic performance. The results indicate that achieving higher levels of accuracy requires more robust control methods, where the performance of the electronic subsystem comprising the optical sensor, data acquisition system, and digital controller has a decisive impact compared to mechanical improvements. It is concluded that, in the simulated and experimental evaluations reported in the literature, no study has conducted a complete calibration of the EMFC load cell weighing instrument or validated it in an industrial environment. This gap highlights the need for future research to include validations under real operating conditions and to carry out follow-up assessments that enable evaluation of the instruments metrological drift over a specified time period.
The p & aacute;ramo, referred to as a variety of tundra ecosystems, are considered one of the most essential biomes in South America, as they are primary sources of fresh water for many countries. However, p & aacute;ramos are increasingly threatened by agricultural expansion, livestock grazing, mining activities that cause deforestation and pollution, urbanization and infrastructure development that fragment and destroy habitats, and climate change, disrupting the delicate balance of these ecosystems. While many approaches have been proposed to monitor forest, grassland, mountain, and other ecosystems, p & aacute;ramo monitoring remains overlooked in the literature. In this work, we propose an end-to-end framework for monitoring p & aacute;ramo ecosystems in Colombia by leveraging deep neural networks and cloud-based technologies. We develop a U-Net convolutional neural network architecture trained on data set specifically tailored to p & aacute;ramo ecosystems, created through manual annotation of high-resolution satellite imagery from Google Earth Pro. The model captures spatial features of p & aacute;ramo vegetation to enable pixel-level semantic segmentation across different time periods. We demonstrate that the model achieves 90% accuracy in p & aacute;ramo versus non-p & aacute;ramo classification on a manually annotated test data set. Additionally, we deploy the model in a cloud-based service, enabling scalable and reproducible p & aacute;ramo monitoring that can be replicated on any platform. This comprehensive framework-encompassing data set creation, model development, and production deployment-provides a generalizable approach for developing and deploying ecosystem surveillance models in operational monitoring systems.
Intermediate cities of the Global South concentrate a growing share of the urban population but lack the financial and institutional capacity to renew their urban collective public transport (UCPT) systems according to smart-city references conceived in the Global North. This article presents the design, implementation and validation of an intelligent system for UCPT based on the technological retrofitting of existing elements (seats, buses, bus-stops and pedestrian crossings), developed within a research macro-project with a case study in Tunja, Colombia. The system derives its requirements from a citizen-centred multidimensional evaluation model of sustainable and smart mobility and is structured in the three layers of an IoT architecture: four low-cost perception modules (i-Seat, i-Bus, i-Bus-Stop and i-Crossing/Traffic-Light), a hybrid Edge–Cloud telematic system with LoRaWAN as the main technology and LTE/4G as backup, and the MueveT platform, which integrates telemetry, estimated time of arrival, detection of presumed infringements, device monitoring and service quality indicators. Validation was carried out with prototypes installed in a private vehicle that emulated UCPT journeys and with a usability evaluation completed by project researchers as a proof of concept. On a 3.72 km route, the mobile node recorded packet error rates of 38.7% with DR1 and 40.4% with DR2, the latter with half the time on air; on a 6.53 km route with four gateways, the fixed bus-stop node recorded no LoRaWAN losses, and the LTE link delivered the samples with a median latency of 272 ms to the platform. A digital twin fed with these records projected deliveries above 85% for 25 buses per gateway, and the platform achieved user experience ratings between 4.25 and 5.00. A comparative analysis with similar developments shows that the main contribution lies in the explicit traceability between the evaluation model, the captured data and the functions, providing a basis for daily operation and evidence for the maturity level of urban mobility.