Correction to: Dietary Recommendations for Persons with Type 2 Diabetes MellitusExp Clin Endocrinol Diabetes 2024; 132(04): 182-215DOI: 10.1055/a-2166-6772
Aktualisierungshinweis Die DDG-Praxisempfehlungen werden regelmäßig zur zweiten Jahreshälfte aktualisiert. Bitte stellen Sie sicher, dass Sie jeweils die neueste Version lesen und zitieren.
The application of natural dyes on natural fiber materials enables the realization of fully bio-based textile products. Usually natural dyes are applied in combination with mordanting agents to improve color strength and fastness properties. This current paper is dedicated to a comparison of the natural fibers wool and cotton with the regenerated cellulose fiber Lyocell. For natural dyeing, extracts from logwood or madder root are used as natural dyes. As mordanting agent, water soluble salts of Fe 2+ and Cu 2+ are evaluated in comparison to the less common agent titanium dioxalate, which is a water soluble chelate complex of Ti 4+ . Applications are done as pre- or meta-mordanting procedures. In this experimental set-up, 42 different sample combinations are realized. Depending on type of dye and mordant, deep color shapes are achieved in the range of red, black to blue. By application of titanium mordant color shades are realized which are not covered by dyeing procedures using the other both mordants. Compared to the dyeing without mordant agent, the lightfastness increases clearly with the metal mordant application. This statement is especially valid for logwood dyeing which exhibits low light fastness grades of 1 or 2 without metal mordant. Depending on mordant procedure, dye/mordant combination and fabric, a light fastness in the range of grade 1–5 can be realized. Best values are determined with dye/copper mordant combinations leading to a light fastness of grade 5, which is an excellent value for natural dyes. In comparison, the determined light fastness from titanium containing applications are minor. Compared to the dyeing without mordant agent, the rubbing fastness decreases clearly with the metal mordant application. However, the application with titanium mordant is advantageous in rubbing fastness and with the combination of titanium/madder, a wet rubbing fastness grade 4 can be reached, which is an excellent result for a natural dye application. The actual study presents a broad range of dyeing recipes for natural dyes. Especially reported is the natural dyeing of Lyocell fiber materials and titanium mordant agents, which in that combination unique and up to now less considered in literature. Finally, the actual study is a helpful tool and starting point for future developments of natural dyeing of regenerated fibers as Lyocell in combination with metal mordanting agents.
The Southern Galactic Disk Survey (GDS) monitored a mosaic of 268 fields along a -wide stripe in the southern Galactic disk with simultaneous observations in and () from September 2010 to September 2019. The survey design and data characteristics, as well as first results in , were presented by Haas et al. (2012; Paper I). Hackstein et al. (2015; Paper II) extended the photometry and analysis process, and introduced the first catalogue including photometry of all 268 fields in and light curves comprising up to 272 observations per field made between September 2010 and May 2015. Here we describe our custom-made observational scheduler and conclude the GDS with light curves of up to 407 observations per field until September 2019 and light curves for a fraction of the fields. 113,449 distinct sources are identified as variables. Together with Paper II, we identified 77,592 variables that are not listed in either the International Variable Star Index (VSX) or the cross-match catalogue by Gavras et al. (2023). All emerging catalogues, comprising light curves, photometry and reduced images, are made publicly available via the German Astrophysical Virtual Observatory (GAVO).
Smart textiles for healthcare applications require reliable, wearable biosensors and robust tools for performance evaluation under realistic conditions. Conventional measurement systems for textile organic electrochemical transistors (t-OECTs) are typically stationary and unsuitable for flexible use. To overcome this limitation, a portable, Bluetooth-enabled evaluation unit was developed, capable of precise voltage application, current measurement, and wireless data transmission to custom software for real-time analysis. Benchmarking against a commercial source-measure unit (SMU) showed excellent agreement in static and dynamic operation. Using this platform, t-OECTs with different gate structures (plain weave, non-woven, ripstop) and electrolytes (alginate and iota-carrageenan) were investigated. Results show that device performance is primarily governed by gate material morphology and electrolyte composition, while electrolyte thickness has little effect under steady-state conditions. These findings highlight the importance of material selection and structural design in t-OECTs and establish the presented evaluation unit as a reliable foundation for future development of wearable and reproducible biosensing systems.