Revascularization remains a challenge for regenerative medicine strategies. Extensive research has been done to identify key moments of the dynamic wound healing cascade where targeted therapies can elicit a proregenerative response. However, the influence of oxygenation, temperature, and their temporal variation during healing are often challenging to promote tissue regeneration. This study investigated the effects of temporally varied oxygenation and temperature conditions on angiogenesis using an in vitro model of rat-derived, intact microvascular fragments in a collagen type-I hydrogel. By generating culture conditions that are similar to the accepted wound healing time course, the angiogenic response depended critically on both the timing of stimulus initiation and the magnitude of deviation from model conditions. Dynamic stimuli activated distinct biological pathways, as evidenced by qPCR analysis, revealing mechanistic links between environmental perturbations and the angiogenic response. This work emphasizes the need for regenerative medicine strategies to consider varying environmental stimuli to improve revascularization outcomes.

Post-traumatic osteoarthritis (PTOA) frequently arises following knee injury, such as anterior cruciate ligament (ACL) rupture. Small animal models are critical for studying PTOA pathology and translating therapeutic interventions. Here our objective was to identify key structural PTOA pathologies and evaluate their associations with aberrant pain and function after a clinically relevant ACL injury in a small animal model. This work leveraged a suite of quantitative cartilage and bone analysis techniques using high-resolution contrast-enhanced microcomputed tomography to investigate the associations between pain-related behaviors and structural osteoarthritis pathogenesis throughout the knee joint in rats. We hypothesized that ACL rupture would increase pain sensitization and limb dysfunction and that this would correlate with the development of clinically relevant osteophytes and cartilage lesions at moderate (4 weeks) and severe disease stages (8 weeks). We showed that ACL rupture induced hyperalgesia and prolonged hindlimb weight-bearing dysfunction; these pain-related behaviors were strongly correlated with changes in the tibiofemoral subchondral bone plate, but not with osteophyte formation. Moreover, we show that patella bone pathology correlates strongly with pain sensitivity and limb function. Joint degeneration initially manifested in the posterior aspect of the medial tibiofemoral compartments, as indicated by full-thickness femoral cartilage lesions and tibial osteophytes at 4 weeks and corresponding tibial cartilage hypertrophy and subchondral sclerosis by 8 weeks. The established outcome parameters and association of structural pathogenesis with pain and dysfunction provide a foundation for studying fundamental PTOA disease etiology and testing therapeutic efficacy in a rodent preclinical model.

Longitudinal estimation of local strain distributions within the regenerative niche of segmental femoral fractures is important for understanding mechanobiology principles for bone healing to design more effective rehabilitation regimens and mitigate nonunion complications. Finite element (FE) modeling is the standard for investigating these biomechanical parameters, yet most existing models lack clinical relevance due to their use of generic data and computational inefficiency. This study developed a subject-specific FE workflow aimed at accurate biomechanical predictions based on subject-specific data while addressing the limitations of previous approaches. For the experimental study, near-critical-sized segmental bone defects were created in the femurs of Wistar rats and stabilized with internal fixators before rehabilitation. Subject-specific geometries of the defect were generated from in vivo micro-CT scans, which were also used to assign material coefficients. Generalized geometries of the cortical and trabecular bone and fixator were integrated to increase computational efficiency. In addition, axial strain data from strain gauges on the fixators were used to define subject-specific boundary conditions, enabling a longitudinal study of the healing process. Sensitivity analyses revealed that incorporating subject-specific boundary conditions significantly enhanced model accuracy, a factor often overlooked in conventional approaches. The workflow was used to build six defect models to approximate compressive strains within the defect and the joint contact force. Strain distributions correlated with experimentally observed mineralization and better predicted functional bone bridging (union) compared to bone volume metrics. This efficient workflow facilitates the assessment of local biomechanics during bone healing and highlights their influence on adaptive regeneration. Further, the findings support the potential application of the subject-specific modeling workflow to guide clinical decision-making and improve therapeutic outcomes for treating bone fractures.

Background: Micronized dehydrated human amnion/chorion membrane (mdHACM) has reduced short term post-traumatic osteoarthritis (PTOA) progression in rats when delivered 24 h after medial meniscal transection (MMT) and is being investigated for clinical use as a disease modifying therapy. Much remains to be assessed, including its potential for longer-term therapeutic benefit and treatment effects after onset of joint degeneration.Objectives: Characterize longer-term effects of acute treatment with mdHACM and determine whether treatment administered to joints with established PTOA could slow or reverse degeneration. Hypotheses: Acute treatment effects will be sustained for 6 weeks, and delivery of mdHACM after onset of joint degeneration will attenuate structural osteoarthritic changes.Methods: Rats underwent MMT or sham surgery (left leg). mdHACM was delivered intra-articularly 24 h or 3 weeks post-surgery (n = 5–7 per group). Six weeks post-surgery, animals were euthanized and left tibiae scanned using equilibrium partitioning of an ionic contrast agent microcomputed tomography (EPIC-µCT) to structurally quantify joint degeneration. Histology was performed to examine tibial plateau cartilage.Results: Quantitative 3D µCT showed that cartilage structural metrics (thickness, X-ray attenuation, surface roughness, exposed bone area) for delayed mdHACM treatment limbs were significantly improved over saline treatment and not significantly different from shams. Subchondral bone mineral density and thickness for the delayed treatment group were significantly improved over acute treated, and subchondral bone thickness was not significantly different from sham. Marginal osteophyte degenerative changes were decreased with delayed mdHACM treatment compared to saline. Acute treatment (24 h post-surgery) did not reduce longer-term joint tissue degeneration compared to saline. Histology supported µCT findings and further revealed that while delayed treatment reduced cartilage damage, chondrocytes displayed qualitatively different morphologies and density compared to sham.Conclusion: This study provides insight into effects of intra-articular delivery timing relative to PTOA progression and the duration of therapeutic benefit of mdHACM. Results suggest that mdHACM injection into already osteoarthritic joints can improve joint health, but a single, acute mdHACM injection post-injury does not prevent long term osteoarthritis associated with meniscal instability. Further work is needed to fully characterize the durability of therapeutic benefit in stable osteoarthritic joints and the effects of repeated injections.

Bone autografts remain the gold standard for bone grafting surgeries despite having increased donor site morbidity and limited availability. Bone morphogenetic protein-loaded grafts represent another successful commercial alternative. However, the therapeutic use of recombinant growth factors has been associated with significant adverse clinical outcomes. This highlights the need to develop biomaterials that closely approximate the structure and composition of bone autografts, which are inherently osteoinductive and biologically active with embedded living cells, without the need for added supplements. Here, injectable growth factor-free bone-like tissue constructs are developed, that closely approximate the cellular, structural, and chemical composition of bone autografts. It is demonstrated that these micro-constructs are inherently osteogenic, and demonstrate the ability to stimulate mineralized tissue formation and regenerate bone in critical-sized defects in-vivo. Furthermore, the mechanisms that allow human mesenchymal stem cells (hMSCs) to be highly osteogenic in these constructs, despite the lack of osteoinductive supplements, are assessed, whereby Yes activated protein (YAP) nuclear localization and adenosine signaling appear to regulate osteogenic cell differentiation. The findings represent a step toward a new class of minimally invasive, injectable, and inherently osteoinductive scaffolds, which are regenerative by virtue of their ability to mimic the tissue cellular and extracellular microenvironment, thus showing promise for clinical applications in regenerative engineering.

Seadragons are a remarkable lineage of teleost fishes in the family Syngnathidae, renowned for having evolved male pregnancy. Comprising three known species, seadragons are widely recognized and admired for their fantastical body forms and coloration, and their specific habitat requirements have made them flagship representatives for marine conservation and natural history interests. Until recently, a gap has been the lack of significant genomic resources for seadragons. We have produced gene-annotated, chromosome-scale genome models for the leafy and weedy seadragon to advance investigations of evolutionary innovation and elaboration of morphological traits in seadragons as well as their pipefish and seahorse relatives. We identified several interesting features specific to seadragon genomes, including divergent noncoding regions near a developmental gene important for integumentary outgrowth, a high genome-wide density of repetitive DNA, and recent expansions of transposable elements and a vesicular trafficking gene family. Surprisingly, comparative analyses leveraging the seadragon genomes and additional syngnathid and outgroup genomes revealed striking, syngnathid-specific losses in the family of fibroblast growth factors (FGFs), which likely involve reorganization of highly conserved gene regulatory networks in ways that have not previously been documented in natural populations. The resources presented here serve as important tools for future evolutionary studies of developmental processes in syngnathids and hold value for conservation of the extravagant seadragons and their relatives.

Despite the innate ability for bone to remodel and repair, its regeneration has a limit. In these cases of critically sized bone defects (CSBD), the bone deficit must be repaired using reconstructive techniques that support immediate load bearing and encourage bone bridging across the defect. High-strength porous titanium implants offer a solution for treatment of CSBD in which the scaffold can support physiological loads, provide a matrix to guide ingrowth, and carry graft materials and/or biologics. Fabrication of titanium meta-materials via additive manufacturing (AM) has unlocked the potential to modulate mechanical and biological performance to achieve a combination of properties previously unachievable. Meta-material scaffolds with topology based on triply periodic minimal surfaces (TPMS) have gained increasing interest for use in biomedical applications due to their bioinspired nature. Despite enthusiasm for TPMS-based titanium scaffolds due to their high strength to stiffness ratio, high permeability, and curvature similar to trabecular bone, there is little preclinical evidence to support their in vivo response in bone. The present study sought to evaluate the performance of gyroid-sheet titanium scaffolds produced via AM to repair a critically size femoral cortical bone defect in rats. Empty gyroid-sheet scaffolds were shown to repair segmental defects with up to 38% of torsional strength and 54% torsional stiffness of the intact femur (control) at 12-weeks. Gyroid-sheet scaffolds carrying recombinant bone morphogenic protein-2 demonstrated bridging bone growth across the length of the defect, with torsional strength and stiffness superior to that of the intact controls.

Successful bone healing in severe trauma depends on early revascularization to restore oxygen, nutrient, growth factor, and progenitor cell supply to the injury. Therapeutic angiogenesis strategies have there-fore been investigated to promote revascularization following severe bone injuries; however, results have been inconsistent. This is the first study investigating the effects of dual angiogenic growth factors (VEGF and PDGF) with low-dose bone morphogenetic protein-2 (BMP-2; 2.5 mu g) on bone healing in a clinically challenging composite bone-muscle injury model. Our hydrogel-based delivery systems demonstrated a more than 90% protein entrapment efficiency and a controlled simultaneous release of three growth factors over 28 days. Co-stimulation of microvascular fragment constructs with VEGF and PDGF promoted vascular network formation in vitro compared to VEGF or PDGF alone. In an in vivo model of segmental bone and volumetric muscle loss injury, combined VEGF (5 mu g) and PDGF (7.5 mu g or 15 mu g) delivery with a low dose of BMP-2 significantly enhanced regeneration of vascularized bone compared to BMP-2 treatment alone. Notably, the regenerated bone mechanics reached similar to 60% of intact bone, a value that was previously only achieved by delivery of high-dose BMP-2 (10 mu g) in this injury model. Overall, sustained delivery of VEGF, PDFG, and BMP-2 is a promising strategy to promote functional vascularized bone tissue regeneration following severe composite musculoskeletal injury. Although this study is conducted in a clinically relevant composite injury model in rats using a simultaneous release strategy, future studies are necessary to test the regenerative potential of spatiotemporally controlled delivery of triple growth factors on bone healing using large animal models. Statement of significance Volumetric muscle loss combined with delayed union or non-union bone defect causes deleterious effects on bone regeneration even with the supplementation of bone morphogenetic protein-2 (BMP-2). In this study, the controlled delivery of dual angiogenic growth factors (vascular endothelial growth factor [VEGF] + Platelet-derived growth factor [PDGF]) increases vascular growth in vitro . Co-delivering VEGF + PDGF significantly increase the bone formation efficacy of low-dose BMP-2 and improves the mechanics of regenerated bone in a challenging composite bone-muscle injury model. (C) 2021 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

ABSTRACTThe dog is the most commonly used large animal model for the study of osteoarthritis. Optimizing methods for assessing cartilage health would prove useful in reducing the number of dogs needed for a valid study of osteoarthritis and cartilage repair. Twelve beagles had critical‐sized osteochondral defects created in the medial femoral condyle of both knees. Eight dogs had T1ρ and T2 magnetic resonance imaging (MRI) performed approximately 6 months after defect creation. Following MRI evaluations, all 12 dogs were humanely euthanatized and cartilage samples were obtained from the medial and lateral femoral condyles, medial and lateral tibial plateaus, trochlear groove, and patella for proteoglycan and collagen quantification. Equilibrium partitioning of an ionic contrast (EPIC)‐µCT was then performed followed by the histologic assessment of the knees. Correlations between T1ρ, T2, EPIC‐µCT and proteoglycan, collagen, and histology scores were assessed using a multivariate analysis accounting for correlations from samples within the same knee and in the same dog. Pearson's correlation coefficients were calculated to assess the strength of significant relationships. Correlations between µCT values and biochemical or histologic assessment were weak to moderately strong (0.09–0.41; p < 0.0001–0.66). There was a weak correlation between the T2 values and cartilage proteoglycan (−0.32; p = 0.04). The correlation between T1ρ values and cartilage proteoglycan were moderately strong (−0.38; p < 0.05) while the strongest correlation was between the T1ρ values and histological assessment of cartilage with a correlation coefficient of 0.58 (p < 0.0001). These data suggest that T1ρ shows promise for possible utility in the translational study of cartilage health and warrants further development in this species. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 38:368‐377, 2020

STUDY DESIGN:An in vivo study examining the functional osseointegration of smooth, rough, and porous surface topographies presenting polyether-ether-ketone (PEEK) or titanium surface chemistry.OBJECTIVE:To investigate the effects of surface topography and surface chemistry on implant osseointegration.SUMMARY OF BACKGROUND DATA:Interbody fusion devices have been used for decades to facilitate fusion across the disc space, yet debate continues over their optimal surface topography and chemistry. Though both factors influence osseointegration, the relative effects of each are not fully understood.METHODS:Smooth, rough, and porous implants presenting either a PEEK or titanium surface chemistry were implanted into the proximal tibial metaphyses of 36 skeletally mature male Sprague Dawley rats. At 8 weeks, animals were euthanized and bone-implant interfaces were subjected to micro-computed tomography analysis (n = 12), histology (n = 4), and biomechanical pullout testing (n = 8) to assess functional osseointegration and implant fixation.RESULTS:Micro-computed tomography analysis demonstrated that bone ingrowth was 38.9 ± 2.8% for porous PEEK and 30.7 ± 3.3% for porous titanium (P = 0.07). No differences in fixation strength were detected between porous PEEK and porous titanium despite titanium surfaces exhibiting an overall increase in bone-implant contact compared with PEEK (P < 0.01). Porous surfaces exhibited increased fixation strength compared with smooth and rough surfaces regardless of surface chemistry (P < 0.05). Across all groups both surface topography and chemistry had a significant overall effect on fixation strength (P < 0.05), but topography accounted for 65.3% of the total variance (ω = 0.65), whereas surface chemistry accounted for 5.9% (ω = 0.06).CONCLUSIONS:The effect of surface topography (specifically porosity) dominated the effect of surface chemistry in this study and could lead to further improvements in orthopedic device design. The poor osseointegration of existing smooth PEEK implants may be linked more to their smooth surface topography rather than their material composition.LEVEL OF EVIDENCE:N/A.

Osteoarthritis (OA) is a widespread disease that continues to lack approved and efficacious treatments that modify disease progression. Micronized dehydrated human amnion/chorion membrane (mu-dHACM) has been shown to be effective in reducing OA progression, but many of the engineering design parameters have not been explored. The objectives of this study were to characterize the particle size distributions of two mu-dHACM formulations and to investigate the influence of these distributions on the in vivo therapeutic efficacy of mu-dHACM. Male Lewis rats underwent medial meniscus transection (MMT) or sham surgery, and intra-articular injections of saline, mu-dHACM, or reduced particle size mu-dHACM (RPS mu-dHACM) were administered at 24 hours postsurgery (n = 9 per treatment group). After 3 weeks, the animals were euthanized, and left legs harvested for equilibrium partitioning of an ionic contrast agent microcomputed tomography and histological analysis. mu-dHACM and RPS mu-dHACM particles were fluorescently tagged and particle clearance was tracked in vivo for up to 42 days postsurgery. Protein elution from both formulations was quantified in vitro. Treatment with mu-HACM, but not RPS mu-dHACM, reduced lesion volume in the MMT model 3 weeks postsurgery. In contrast, RPS mu-dHACM increased cartilage surface roughness and osteophyte cartilage thickness and volume compared to saline treatment. There was no difference of in vivo fluorescently tagged particle clearance between the two mu-dHACM sizes. RPS mu-dHACM showed significantly greater protein elution in vitro over 21 days. Overall, delivery of RPS mu-dHACM did result in an increase of in vivo joint degeneration and in vitro protein elution compared to mu-dHACM, but did not result in differences in joint clearance in vivo. These results suggest that particle size and factor elution may be tailorable factors that are important to optimize for particulate amniotic membrane treatment to be an effective therapy for OA. Impact Statement Osteoarthritis (OA) is a widespread disease that continues to lack treatments that modify the progression of the disease. Micronized dehydrated human amnion/chorion membrane (mu-dHACM) has been shown to be effective in reducing OA progression, but many of the engineering design parameters have not been explored. This work investigates the effects of particle size profile of the mu-dHACM particles and lays out the methods used in these studies. The results of this work will guide engineers in designing mu-dHACM treatments specifically and disease-modifying OA therapeutics generally, and it demonstrates the utility of novel therapeutic evaluation methods such as contrast-enhanced microcomputed tomography.

The objective of this study was to characterize early osteoarthritis (OA) development in cartilage and bone tissues in the rat medial meniscus transection (MMT) model using non-destructive equilibrium partitioning of an ionic contrast agent micro-computed tomography (EPIC-μCT) imaging. Cartilage fibrillation, one of the first physiological developments in OA, was quantified in the rat tibial plateau as three-dimensional (3D) cartilage surface roughness using a custom surface-rendering algorithm.Male Lewis rats underwent MMT or sham-operation in the left leg. At one- and three-weeks post-surgery, the animals (n=7-8 per group) were euthanized and the left legs were scanned using EPIC-μCT imaging to quantify cartilage and bone parameters. In addition, a custom algorithm was developed to measure the roughness of 3D surfaces. This algorithm was validated and used to quantify cartilage surface roughness changes as a function of time post-surgery.MMT surgery resulted in significantly greater cartilage damage and subchondral bone sclerosis with the damage increasing in both severity and area from one-to three-weeks post-surgery. Analysis of rendered 3D surfaces could accurately distinguish early changes in joints developing OA, detecting significant increases of 45% and 124% in surface roughness at one- and three-weeks post-surgery respectively.Disease progression in the MMT model progresses sequentially through changes in the cartilage articular surface, extracellular matrix composition, and then osteophyte mineralization and subchondral bone sclerosis. Cartilage surface roughness is a quantitative, early indicator of degenerative joint disease in small animal OA models and can potentially be used to evaluate therapeutic strategies.

Poly(para-phenylene) (PPP) is a novel aromatic polymer with higher strength and stiffness than polyetheretherketone (PEEK), the gold standard material for polymeric load-bearing orthopaedic implants. The amorphous structure of PPP makes it relatively straightforward to manufacture different architectures, while maintaining mechanical properties. PPP is promising as a potential orthopaedic material; however, the biocompatibility and osseointegration have not been well investigated. The objective of this study was to evaluate biological and mechanical behavior of PPP, with or without porosity, in comparison to PEEK. We examined four specific constructs: 1) solid PPP, 2) solid PEEK, 3) porous PPP and 4) porous PEEK. Pre-osteoblasts (MC3T3) exhibited similar cell proliferation among the materials. Osteogenic potential was significantly increased in the porous PPP scaffold as assessed by ALP activity and calcium mineralization. In vivo osseointegration was assessed by implanting the cylindrical materials into a defect in the metaphysis region of rat tibiae. Significantly more mineral ingrowth was observed in both porous scaffolds compared to the solid scaffolds, and porous PPP had a further increase compared to porous PEEK. Additionally, porous PPP implants showed bone formation throughout the porous structure when observed via histology. A computational simulation of mechanical push-out strength showed approximately 50% higher interfacial strength in the porous PPP implants compared to the porous PEEK implants and similar stress dissipation. These data demonstrate the potential utility of PPP for orthopaedic applications and show improved osseointegration when compared to the currently available polymeric material. (C) 2018 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Polyether-ether-ketone (PEEK) is one of the most common materials used for load-bearing orthopaedic devices due to its radiolucency and favorable mechanical properties. However, current smooth-surfaced PEEK implants can lead to fibrous encapsulation and poor osseointegration. This study compared the in vitro and in vivo bone response to two smooth PEEK alternatives: porous PEEK and plasma-sprayed titanium coatings on PEEK. MC3T3 cells were grown on smooth PEEK, porous PEEK, and Ti-coated PEEK for 14 days and assayed for calcium content, osteocalcin, VEGF and ALP activity. Osseointegration was investigated by implanting cylindrical implants into the proximal tibiae of male Sprague Dawley rats for 8 weeks. Bone-implant interfaces were evaluated using μCT, histology and pullout testing. Cells on porous PEEK surfaces produced more calcium, osteocalcin, and VEGF than smooth PEEK and Ti-coated PEEK groups. Bone ingrowth into porous PEEK surfaces was comparable to previously reported porous materials and correlated well between μCT and histology analysis. Porous PEEK implants exhibited greater pullout force, stiffness and energy-to-failure compared to smooth PEEK and Ti-coated PEEK, despite Ti-coated PEEK exhibiting a high degree of bone-implant contact. These results are attributed to increased mechanical interlocking of bone with the porous PEEK implant surface. Overall, porous PEEK was associated with improved osteogenic differentiation in vitro and greater implant fixation in vivo compared to smooth PEEK and Ti-coated PEEK. These results suggest that not all PEEK implants inherently generate a fibrous response and that topography has a central role in determining implant osseointegration.

Metallic reconstruction plates used for fracture stabilization typically require intraoperative contouring for patient-specific anatomical fit. Despite this, characterization of plate mechanical properties after contouring has previously been limited.

A common design constraint in functional tissue engineering is that scaffolds intended for use in load-bearing sites possess similar mechanical properties to the replaced tissue. Here, we tested the hypothesis that in vivo loading would enhance bone morphogenetic protein-2 (BMP-2)-mediated bone regeneration in the presence of a load-bearing PLDL scaffold, whose pores and central core were filled with BMP-2-releasing alginate hydrogel. First, we evaluated the effects of in vivo mechanical loading on bone regeneration in the structural scaffolds. Second, we compared scaffold-mediated bone regeneration, independent of mechanical loading, with alginate hydrogel constructs, without the structural scaffold, that have been shown previously to facilitate in vivo mechanical stimulation of bone formation. Contrary to our hypothesis, mechanical loading had no effect on bone formation, distribution, or biomechanical properties in structural scaffolds. Independent of loading, the structural scaffolds reduced bone formation compared to non-structural alginate, particularly in regions in which the scaffold was concentrated, resulting in impaired functional regeneration. This is attributable to a combination of stress shielding by the scaffold and inhibition of cellular infiltration and tissue ingrowth. Collectively, these data question the necessity of scaffold similarity to mature tissue at the time of implantation and emphasize development of an environment conducive to cellular activation of matrix production and ultimate functional regeneration.

Characterization of articular cartilage morphology and composition using microcomputed tomography (microCT) techniques requires the use of contrast agents to enhance X-ray attenuation of the tissue. This chapter describes the use of an anionic iodinated contrast agent at equilibrium with articular cartilage. In this technique, negatively charged contrast agent molecules distribute themselves inversely with respect to the negatively charged proteoglycans (PGs) within the cartilage tissue (Palmer et al. Proc Natl Acad Sci U S A 103:19255-19260, 2006). This relationship allows for assessment of cartilage degradation, as areas of high X-ray attenuation have been shown to correspond to areas of depleted PGs (Palmer et al. Proc Natl Acad Sci U S A 103:19255-19260, 2006; Xie et al. Osteoarthritis Cartilage 18:65-72, 2010).

Despite its widespread clinical use in load-bearing orthopedic implants, polyether-ether-ketone (PEEK) is often associated with poor osseointegration. In this study, a surface-porous PEEK material (PEEK-SP) was created using a melt extrusion technique. The porous layer was 399.6±63.3 μm thick and possessed a mean pore size of 279.9±31.6 μm, strut spacing of 186.8±55.5 μm, porosity of 67.3±3.1% and interconnectivity of 99.9±0.1%. Monotonic tensile tests showed that PEEK-SP preserved 73.9% of the strength (71.06±2.17 MPa) and 73.4% of the elastic modulus (2.45±0.31 GPa) of as-received, injection-molded PEEK. PEEK-SP further demonstrated a fatigue strength of 60.0 MPa at one million cycles, preserving 73.4% of the fatigue resistance of injection-molded PEEK. Interfacial shear testing showed the pore layer shear strength to be 23.96±2.26 MPa. An osseointegration model in the rat revealed substantial bone formation within the pore layer at 6 and 12 weeks via microcomputed tomography and histological evaluation. Ingrown bone was more closely apposed to the pore wall and fibrous tissue growth was reduced in PEEK-SP when compared to non-porous PEEK controls. These results indicate that PEEK-SP could provide improved osseointegration while maintaining the structural integrity necessary for load-bearing orthopedic applications.

INTRODUCTION:Micronized dehydrated human amnion/chorion membrane (μ-dHACM) is derived from donated human placentae and has anti-inflammatory, low immunogenic and anti-fibrotic properties. The objective of this study was to quantitatively assess the efficacy of μ-dHACM as a disease modifying intervention in a rat model of osteoarthritis (OA). It was hypothesized that intra-articular injection of μ-dHACM would attenuate OA progression.METHODS:Lewis rats underwent medial meniscal transection (MMT) surgery to induce OA. Twenty four hours post-surgery, μ-dHACM or saline was injected intra-articularly into the rat joint. Naïve rats also received μ-dHACM injections. Microstructural changes in the tibial articular cartilage were assessed using equilibrium partitioning of an ionic contrast agent (EPIC-μCT) at 21 days post-surgery. The joint was also evaluated histologically and synovial fluid was analyzed for inflammatory markers at 3 and 21 days post-surgery.RESULTS:There was no measured baseline effect of μ-dHACM on cartilage in naïve animals. Histological staining of treated joints showed presence of μ-dHACM in the synovium along with local hypercellularity at 3 and 21 days post-surgery. In MMT animals, development of cartilage lesions at 21 days was prevented and number of partial erosions was significantly reduced by treatment with μ-dHACM. EPIC-μCT analysis quantitatively showed that μ-dHACM reduced proteoglycan loss in MMT animals.CONCLUSIONS:μ-dHACM is rapidly sequestered in the synovial membrane following intra-articular injection and attenuates cartilage degradation in a rat OA model. These data suggest that intra-articular delivery of μ-dHACM may have a therapeutic effect on OA development.