Here, we report the synthesis of BCN-93, a meltable, functionalized, and permanently porous metal-organic polyhedron (MOP) and its subsequent transformation into amorphous or crystalline, shaped, self-standing, transparent porous films via melting and subsequent cooling. The synthesis entails the outer functionalization of a MOP with meltable polymer chains: in our model case, we functionalized a Rh(II)-based cuboctahedral MOP with poly(ethylene glycol). Finally, we demonstrate that once melted, BCN-93 can serve as a porous matrix into which other materials or molecules can be dispersed to form mixed-matrix composites. To illustrate this, we combined BCN-93 with one of various additives (either two MOF crystals, a porous cage, or a linear polymer) to generate a series of mixed-matrix films, each of which exhibited greater CO2 uptake relative to the parent film.

Most reported porous materials are either extended networks or monomeric discrete cavities; indeed, porous structures of intermediate size have scarcely been explored. Herein, we present the stepwise linkage of discrete porous metal-organic cages or polyhedra (MOPs) into oligomeric structures with a finite number of MOP units. The synthesis of these new oligomeric porous molecules entails the preparation of 1-connected (1-c) MOPs with only one available azide reactive site on their surface. The azide-terminated 1-c MOP is linked through copper(i)-catalysed azide-alkyne cycloaddition click chemistry with additional alkyne-terminated 1-c MOPs, 4-c clusters, or 24-c MOPs to yield three classes of giant oligomeric molecules: dimeric, tetrameric, or satellite-like, respectively. Importantly, all the giant molecules that we synthesised are soluble in water and permanently porous in the solid state.

The grave health and environmental consequences of water pollution demand new tools, including new sensing technologies, for the immediate detection of contaminants in situ. Herein, we report the integration of metal–organic cages or polyhedra (MOCs/MOPs) within a nanophotonic sensor for the rapid, direct, and real-time detection of small (<500 Da) pollutant molecules in water. The sensor, a bimodal waveguide silicon interferometer incorporating Rh(II)-based MOPs as specific chemical receptors, does not require sample pretreatment and enables minimal expenditure of time and reagents. We validated our sensor for the detection of two common pollutants: the industrial corrosion inhibitor 1,2,3-benzotriazole (BTA) and the systemic insecticide imidacloprid (IMD). The sensor offers a fast time-to-result response (15 min), high sensitivity, and high accuracy. The limit of detection (LOD) in tap water for BTA is 0.068 μg/mL and for IMD, 0.107 μg/mL, both of which are below the corresponding toxicity thresholds defined by the European Chemicals Agency (ECHA). By combining innovative chemical molecular receptors such as MOPs with state-of-the-art photonic sensing technologies, our research opens the path to implement competitive sensor devices for in situ environmental monitoring.

HYPOTHESIS:The use of immobilized enzyme-type biocatalysts to mimic specific processes in soil can be considered one of the most promising alternatives to overcome the difficulties behind the structural elucidation of riverine humic-derived iron-complexes. Herein, we propose that the immobilization of the functional mushroom tyrosinase, Agaricus bisporus Polyphenol Oxidase 4 (AbPPO4) on mesoporous SBA-15-type silica could contribute to the study of small aquatic humic ligands such as phenols.EXPERIMENTS:The silica support was functionalized with amino-groups in order to investigate the impact of surface charge on the tyrosinase loading efficiency as well as on the catalytic performance of adsorbed AbPPO4. The oxidation of various phenols was catalyzed by the AbPPO4-loaded bioconjugates, yielding high levels of conversion and confirming the retention of enzyme activity after immobilization. The structures of the oxidized products were elucidated by integrating chromatographic and spectroscopic techniques. We also evaluated the stability of the immobilized enzyme over a wide range of pH values, temperatures, storage-times and sequential catalytic cycles.FINDINGS:This is the first report where the latent AbPPO4 is confined within silica mesopores. The improved catalytic performance of the adsorbed AbPPO4 shows the potential use of these silica-based mesoporous biocatalysts for the preparation of a column-type bioreactor for in situ identification of soil samples.

Prebiotics are defined as non-digestible dietary components that promote the growth of beneficial gut microorganisms. In many cases, however, this capability is not systematically evaluated. Here, we develop a methodology for determining prebiotic-responsive bacteria using the popular dietary supplement inulin. We first identify microbes with a capacity to bind inulin using mesoporous silica nanoparticles functionalized with inulin. 16S rRNA gene amplicon sequencing of sorted cells revealed that the ability to bind inulin was widespread in the microbiota. We further evaluate which taxa are metabolically stimulated by inulin and find that diverse taxa from the phyla Firmicutes and Actinobacteria respond to inulin, and several isolates of these taxa can degrade inulin. Incubation with another prebiotic, xylooligosaccharides (XOS), in contrast, shows a more robust bifidogenic effect. Interestingly, the Coriobacteriia Eggerthella lenta and Gordonibacter urolithinfaciens are indirectly stimulated by the inulin degradation process, expanding our knowledge of inulin-responsive bacteria.

The surface chemistry of Metal-Organic Polyhedra (MOPs) is crucial to their physicochemical properties because it governs how they interact with external substances such as solvents, synthetic organic molecules, metal ions, and even biomolecules. Consequently, the advancement of synthetic methods that facilitate the incorporation of diverse functional groups onto MOP surfaces will significantly broaden the range of properties and potential applications for MOPs. This study describes the use of copper(I)-catalysed, azide-alkyne cycloaddition (CuAAC) click reactions to post-synthetically modify the surface of alkyne-functionalised cuboctahedral MOPs. To this end, a novel Rh(II)-based MOP with 24 available surface alkyne groups was synthesised. Each of the 24 alkyne groups on the surface of the "clickable" Rh-MOP can react with azide-containing molecules at room temperature, without compromising the integrity of the MOP. The wide substrate catalogue and orthogonal nature of CuAAC click chemistry was exploited to densely functionalise MOPs with diverse functional groups, including polymers, carboxylic and phosphonic acids, and even biotin moieties, which retained their recognition capabilities once anchored onto the surface of the MOP.

Increasing the chemical complexity of metal-organic cages (MOCs) or polyhedra (MOPs) demands control over the simultaneous organization of diverse organic linkers and metal ions into discrete caged structures. Herein, we show that a pre-assembled complex of the archetypical cuboctahedral MOP can be used as a template to replicate such caged structure, one having a "triblock Janus-type" configuration that is both heterometallic and heteroleptic.

An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

To facilitate the creation of novel nanocarrier systems targeting the intestinal microbiome, inulin-conjugated mesoporous silica nanoparticles (MSNs) are described herein for the first time. Surface functionalization is achieved on either hydrophilic or hydrophobic mesoporous nanoparticles using different conjugation methods. The targeting performance of the resulting materials is assessed and compared upon incubation with human stool. It appears that amide formation is the most favorable coupling method on hydrophilic MSNs to achieve the desired bioconjugate. Remarkably, high affinity of gut bacteria to the conjugated particles can be obtained, paving the way to novel targeted drug delivery systems.

Metal-organic polyhedra (MOPs) are a subclass of coordination cages that can adsorb and host species in solution and are permanently porous in solid-state. These characteristics, together with the recent development of their orthogonal surface chemistry and the assembly of more stable cages, have awakened the latent potential of MOPs to be used as building blocks for the synthesis of extended porous networks. This review article focuses on exploring the key developments that make the extension of MOPs possible, highlighting the most remarkable examples of MOP-based soft materials and crystalline extended frameworks. Finally, the article ventures to offer future perspectives on the exploitation of MOPs in fields that still remain ripe toward the use of such unorthodox molecular porous platforms.

Metal-organic frameworks (MOFs) assembled from multiple building blocks exhibit greater chemical complexity and superior functionality in practical applications. Herein, we report a new approach based on using prefabricated cavities to design isoreticular multicomponent MOFs from a known parent MOF. We demonstrate this concept with the formation of multicomponent HKUST-1 analogues, using a prefabricated cavity that comprises a cuboctahedral Rh(II) metal-organic polyhedron functionalized with 24 carboxylic acid groups. The cavities are reticulated in three dimensions via Cu(II)-paddlewheel clusters and (functionalized) 1,3,5-benzenetricarboxylate linkers to form three- and four-component HKUST-1 analogues.

A down‐sized high‐pressure torsion device is developed to be used in an INSTRON deformation machine available at the High Energy Materials Science beamline at PETRA III. This setup allows to obtain synchrotron diffraction patterns in situ during severe plastic straining. Two different materials are studied: in pure Ni, the dislocation density and coherently scattering domain size are analyzed; in NiTi shape memory alloy, amorphization and a reverse martensitic phase transformation are investigated. The in situ experiments facilitate the characterization of the microstructural evolution of these materials depending on uniaxial loading, hydrostatic pressure, and torsional strain.

When a material comes in contact with serum or plasma, proteins will immediately adsorb to its surface. The extent of serum protein adsorption as well as the composition of the protein corona is thought to be decisive for the biological fate. The understanding of the mechanism underlying the concurrent adsorption of multiple proteins and the exact ways by which the adsorbed proteins interact with the biological setting, is still rudimentary. For both cases, a correct estimate of the composition of the protein corona is the key for an improved understanding. The protein corona composition is typically analyzed indirectly through analysis of the supernatant after protein desorption. However, in most cases the particles are not analyzed afterward in order to ensure that all proteins indeed have desorbed. Here, the results related to the analysis of the amounts of proteins in the corona are reported, focusing on the desorbed as well as the fraction of proteins that do not desorb. Irreversible protein adsorption can be observed in some cases. The results show that, in addition of the analysis of the supernatant, analysis of the particles is of critical importance to fully characterize the protein corona formed on nanoparticles.

Self-assembly processes guide disordered molecules or particles into long-range organized structures due to specific supramolecular interactions among the building entities. Herein, we report a unique evaporation-induced self-assembly (EISA) strategy for four different silica nanoparticle systems obtained through peptide functionalization of the particle surface. First, covalent peptide-silica coupling was investigated in detail, starting with the grafting of a single amino acid (L-serine) and expanded to specific small peptides (up to four amino acids) and transferred to different particle types (MCM-48-type MSNs, solid nanoparticles, and newly developed virus-like nanoparticles). These materials were investigated regarding their ability to undergo EISA, which was shown to be independent of particle type and amount of peptide anchored to their surface. This EISA-based approach provides new possibilities for the design of future advanced drug delivery systems, engineered hierarchical sorbents, and nanocatalyst assemblies.

Hollow mesoporous silica particles (HMSPs) have recently drawn much attention as nanocatalysts, owing to their benefits and potential for greener chemical processes. Here, improved synthesis of HMSPs exhibiting a shell with a 3-D pore structure is proposed to overcome previous synthetic issues, such as reproducibility, particle size distribution, precise tailoring of size/shell thickness, low yield, etc. Additionally, precisely controlled and selective functionalization with amine groups is achieved owing to careful protection and sequential extraction protocols. To overcome time-consuming and complex multistep extraction procedures, different methods were optimized towards the most efficient protocol. The obtained materials are characterized in terms of structure, porosity and functions, and the confined catalytic activity was tested in a Knoevenagel reaction. The nanocatalysts were compared before and after the core template was removed to confirm that the only catalytic species are free amines located on the inner external surface of the shell (i. e., the surface exposed towards the hollow core).

The typical method for minimizing serum protein adsorption in biological settings and prolonging blood circulation time of nanoparticles, is to anchor hydrophilic polymers (e.g., poly(ethylene glycol), PEG) on the particle surface, which is most often done by covalent attachment (PEGylation). Herein, different PEGylation methods were realised and compared to functionalize mesoporous silica nanoparticles (MSNs). First, reactive groups were installed using post-grafting procedures with different functional silanes. Further, PEGs carrying a functional group and having different chain lengths and termini, were used. The grafting efficacy as well as the structural and physicochemical characteristics of the resulting particles were determined. Finally, the serum protein adsorption behaviour of these functionalized particles was investigated using thermogravimetric analysis. The type of selected coupling method was shown to strongly influence the grafting efficiency as well as the resulting protein adsorption. The results highlight the importance of the right choice of the linking chemistry when aiming at surface functionalization of nanoparticles.

Chromatographic performance of a chiral stationary phase is significantly influenced by the employed solid support. Properties of the most commonly used support, silica particles, such as size and size distribution, and pore size are of utmost importance for both superficially porous particles and fully porous particles. In this work, we have focused on evaluation of fully porous particles from three different vendors as solid supports for a brush-type chiral stationary phase based on 9-O-tert-butylcarbamoyl quinidine. We have prepared corresponding stationary phases under identical experimental conditions and determined the parameters of the modified silica by physisorption measurements and scanning electron microscopy. Enantiorecognition properties of the chiral stationary phases have been studied using preferential sorption experiments. The same material was slurry-packed into chromatographic columns and the chromatographic properties have been evaluated in liquid chromatography. We show that preferential sorption can provide valuable information about the influence of the pore size and total pore volume on the interaction of analytes of different size with the chirally-modified silica surface. The data can be used to understand differences observed in chromatographic evaluation of the chiral stationary phases. The combination of preferential sorption and liquid chromatography separation can provide detailed information on new chiral stationary phases.

The influence of the crystallization temperature and the pressure on the crystallization kinetics, structure and compression strength of gamma-polypropylene was investigated. Samples were produced in a custom-made highpressure crystallization cell and characterized by differential scanning calorimetry (DSC), wide angle X-ray scattering (WARS) and transmission electron microscopy (TEM). It could be shown that the strength is mainly affected by the mean lamellar thickness. The strength of gamma-PP is at least 40% higher than alpha-PP at the same mean lamellar thickness. This confirms the hypothesis that the arrangement of non-parallel chains restricts the number of possible slip systems so that almost no mobile dislocations are generated. The mode of nucleation is only slightly affected by the crystallization pressure. The Avrami coefficient is n = 2.5 +/- 0.1 at the beginning of crystallization and largely independent of pressure.

Mesoporous silica nanoparticles (MSNs) are considered as promising next-generation nanocarriers for health-related applications. However, their effectiveness mostly relies on their efficient and surface-specific functionalization. In this contribution, we explored different strategies for the rational multistep synthesis of functional MCM-48-type MSNs with selectively created active inner and/or external surfaces. Functional groups were first installed using a combination of (delayed) co-condensation and post-grafting procedures. Both amine [(3-aminopropyl)triethoxysilane (APTS)] and thiol [(3-mercaptopropyl)trimethoxysilane (MPTS)] silanes were used, in various addition sequences. Following this, the different platforms were further functionalized with polyethylene glycol and/or with a pro-chelate ligand used as a magnetic resonance imaging contrast agent (diethylenetriaminepentaacetic acid chelates) and/or loaded with quercetin and/or grafted with an organic dye (rhodamine). The efficiency of the multiple grafting strategies and the effects on the MSN carrier properties are presented. Finally, the colloidal stability of the different systems was evaluated in physiological media, and preliminary tests were performed to verify their drug release capability. The use of MPTS appeared beneficial when compared to APTS in delayed co-condensation procedures to preserve both selective distribution of the functional groups, reactive functionality, and pore ordering. Our results provide in-depth insights into the efficient design of (multi)functional MSNs and especially on the crucial role played by the sequence of step-by-step functionalization methods aiming to produce multipurpose and stable bioplatforms.

In this computational study, we investigate the morphology and dynamics of nanostructures formed by the ionic liquid 1‑dodecyl‑3‑methylimidazolium chloride [C12mim]Cl dissolved in water. Recent works emphasize the positive impact of this additive on various catalytic transformations. The assembling process revealed by molecular dynamics simulation is discussed in detail. For verification, small-angle X-ray scattering diffractograms and dielectric relaxation spectra are calculated from the trajectories and compared to experimental ones. For the latter, we offer an alternative hypothesis to the contemporary interpretation based on our component analysis.