Two-photon polymerization (2PP) 3D printing enables top-down biomaterial synthesis with nanoscale spatial resolution for de novo design of monodisperse injectable drug delivery systems. Spatiotemporal Controlled Release Inks of Biocompatible polyEsters (SCRIBE) is a novel poly(lactic-co-glycolic acid)-triacrylate resin family with sub-micron resolution and tuneable hydrolysis that addresses the limitations of current 2PP resins. SCRIBE enables the direct printing of hollow microparticles with tuneable chemistry and complex geometries inaccessible to molding techniques, which are used to engineer controlled protein release in vitro and in vivo. SCRIBE microparticles are used to modulate antibody titers and class switching as a function of antigen release rate and extend these findings to enable a single-injection vaccine formulation with extended antibody induction kinetics. Demonstrating how the chemistry and computer-aided design of 2PP-printed microparticles can be used to tune responses to biomacromolecule release in vivo opens significant opportunities for a new generation of drug delivery vehicles.

Efficient delivery of therapeutic proteins and vaccine antigens to intracellular targets is challenging due to generally poor cell membrane permeation and endolysosomal entrapment causing degradation. Herein, these challenges are addressed by developing an oxygen-tolerant photoinitiated polymerization-induced self-assembly (Photo-PISA) process, allowing for the microliter-scale (10 µL) synthesis of protein-loaded polymersomes directly in 1536-well plates. High-resolution techniques capable of analysis at a single particle level are employed to analyze protein encapsulation and release mechanisms. Using confocal microscopy and super-resolution stochastic optical reconstruction microscopy (STORM) imaging, their ability to deliver proteins into the cytosol following endosomal escape is subsequently visualized. Lastly, the adaptability of these polymersomes is exploited to encapsulate and deliver a prototype vaccine antigen, demonstrating its ability to activate antigen-presenting cells and support antigen cross-presentation for applications in subunit vaccines and cancer immunotherapy. This combination of ultralow volume synthesis and efficient intracellular delivery holds significant promise for unlocking the high throughput screening of a broad range of otherwise cost-prohibitive or early-stage therapeutic protein and vaccine antigen candidates that can be difficult to obtain in large quantities. The versatility of this platform for rapid screening of intracellular protein delivery can result in significant advancements across the fields of nanomedicine and biomedical engineering.

Staphylococcus aureus is a leading cause of nosocomial implant-associated infections, causing significant morbidity and mortality, underscoring the need for rapid, non-invasive, and cost-effective diagnostics. Here, we optimise the synthesis of renal-clearable gold nanoclusters (AuNCs) for enhanced catalytic activity with the aim of developing a sensitive colourimetric diagnostic for bacterial infection. All-atom molecular dynamics (MD) simulations confirm the stability of glutathione-coated AuNCs and surface access for peroxidase-like activity in complex physiological environments. We subsequently develop a biosensor by encapsulating these optimised AuNCs in bacterial toxin-responsive liposomes, which is extensively studied by various single-particle techniques. Upon exposure to S. aureus toxins, the liposomes rupture, releasing AuNCs that generate a colourimetric signal after kidney-mimetic filtration. The biosensor is further validated in vitro and in vivo using a hyaluronic acid (HA) hydrogel implant infection model. Urine samples collected from mice with bacteria-infected HA hydrogel implants turn blue upon substrate addition, confirming the suitability of the sensor for non-invasive detection of implant-associated infections. This platform has significant potential as a versatile, cost-effective diagnostic tool. Implant-associated infections with Staphylococcus aureus pose serious clinical challenges. Here, the authors develop a biosensor based on toxin-responsive liposomes encapsulating gold nanoclusters, providing a non-invasive, colourimetric diagnostic tool for bacterial infection detection with urinary readout.

Lipid nanoparticle (LNP) formulation plays a vital role in RNA vaccine delivery. However, further optimisation of self-amplifying RNA (saRNA) vaccine formulation could help enhance seroconversion rates in humans and improve storage stability. Altering either the ionisable or helper lipid can alter the characteristics and performance of formulated saRNA through the interplay of the phospholipid's packing parameter and the geometrical shape within the LNP membrane. In this study, we compared the impact of three helper lipids (DSPC, DOPC, or DOPE) used with two different ionisable lipids (MC3 and C12-200) on stability, transfection efficiency and the inflammation and immunogenicity of saRNA. While helper lipid identity altered saRNA expression across four cell lines in vitro, this was not predictive of an ex vivo or in vivo response. The helper lipid used influenced LNP storage where DSPC provided the best stability profile over four weeks at 2-8 °C. Importantly, helper lipid impact on LNP storage stability was the best predictor of expression in human skin explants, where C12-200 in combination with DSPC provided the most durable expression. C12-200 LNPs also improved protein expression (firefly luciferase) and humoral responses to a SARS-CoV-2 spike saRNA vaccine compared to MC3 LNPs, where the effect of helper lipids was less apparent. Nevertheless, the performance of C12-200 in combination with DSPC appears optimal for saRNA when balancing preferred storage stability requirements against in vivo and ex vivo potency. These data suggest that helper lipid influences the stability and functionality of ionisable lipid nanoparticle-formulated saRNA.

Microrobots can provide spatiotemporally well-controlled cargo delivery that can improve therapeutic efficiency compared to conventional drug delivery strategies. Robust microfabrication methods to expand the variety of materials or cargoes that can be incorporated into microrobots can greatly broaden the scope of their functions. However, current surface coating or direct blending techniques used for cargo loading result in inefficient loading and poor cargo protection during transportation, which leads to cargo waste, degradation and non-specific release. Herein, a versatile platform to fabricate fillable microrobots using microfluidic loading and dip sealing (MLDS) is presented. MLDS enables the encapsulation of different types of cargoes within hollow microrobots and protection of cargo integrity. The technique is supported by high-resolution 3D printing with an integrated microfluidic loading system, which realizes a highly precise loading process and improves cargo loading capacity. A corresponding dip sealing strategy is developed to encase and protect the loaded cargo whilst maintaining the geometric and structural integrity of the loaded microrobots. This dip sealing technique is suitable for different materials, including thermal and light-responsive materials. The MLDS platform provides new opportunities for microrobotic systems in targeted drug delivery, environmental sensing, and chemically powered micromotor applications.

SARS-CoV-2 has been the cause of a global pandemic since 2019 and remains a medical urgency. siRNA-based therapies are a promising strategy to fight viral infections. By targeting a specific region of the viral genome, siRNAs can efficiently downregulate viral replication and suppress viral infection. However, to achieve the desired therapeutic activity, siRNA requires a suitable delivery system. The VIPER (virus-inspired polymer for endosomal release) block copolymer has been reported as promising delivery system for both plasmid DNA and siRNA in the past years. It is composed of a hydrophilic block for condensation of nucleic acids as well as a hydrophobic, pH-sensitive block that, at acidic pH, exposes the membrane lytic peptide melittin, which enhances endosomal escape. In this study, we aimed at developing a formulation for pulmonary administration of siRNA to suppress SARS-CoV-2 replication in lung epithelial cells. After characterizing siRNA/VIPER polyplexes, the activity and safety profile were confirmed in a lung epithelial cell line. To further investigate the activity of the polyplexes in a more sophisticated cell culture system, an air-liquid interface (ALI) culture was established. siRNA/VIPER polyplexes reached the cell monolayer and penetrated through the mucus layer secreted by the cells. Additionally, the activity against wild-type SARS-CoV-2 in the ALI model was confirmed by qRT-PCR. To investigate translatability of our findings, the activity against SARS-CoV-2 was tested ex vivo in human lung explants. Here, siRNA/VIPER polyplexes efficiently inhibited SARS-CoV-2 replication. Finally, we verified the delivery of siRNA/VIPER polyplexes to lung epithelial cells in vivo, which represent the main cellular target of viral infection in the lung. In conclusion, siRNA/VIPER polyplexes efficiently delivered siRNA to lung epithelial cells and mediated robust downregulation of viral replication both in vitro and ex vivo without toxic or immunogenic side effects in vivo, demonstrating the potential of local siRNA delivery as a promising antiviral therapy in the lung.

Endosomolytic vaccine nanocarriers can potentiate cellular immune responses by enhancing cross‐presentation. A cationic polymer–lytic peptide conjugate (VIPER) that greatly improves endosomal escape and intracellular activity of nucleic acid cargoes is recently developed; furthermore, it is hypothesized that VIPER's unique mechanism of endosomal disruption can increase cytoplasmic delivery of other biomacromolecules (e.g., peptides). Herein, VIPER is formulated as a polyplex subunit vaccine composed of conjugated peptide antigens and electrostatically complexed poly(I:C) nucleic acid adjuvant and is evaluated to determine whether the presence of the lytic peptide melittin conjugated to the pH‐responsive micelle core improves vaccination outcomes. Although VIPER delivers peptide antigens intracellularly, disrupts endosomes in antigen‐presenting cells (APCs) in vitro, and generates strong antigen‐specific cytotoxic T cell responses in vivo, significantly enhanced cross‐presentation is only observed in conjunction with VIPER‐induced local cell death. While these results demonstrate that VIPER is a useful platform technology for the study of vaccine delivery, full elucidation of how endosomal disruption by VIPER improves vaccination outcomes will require decoupling of endosomolysis from cytotoxicity, as well as precise targeting of VIPER vaccine formulations to APC populations in vivo.

Peptide-based cancer vaccines offer production and safety advantages but have had limited clinical success due to their intrinsic instability, rapid clearance, and low cellular uptake. Nanoparticle-based delivery vehicles can improve the in vivo stability and cellular uptake of peptide antigens. Here, a well-defined, self-assembling mannosylated polymer is developed for anticancer peptide antigen delivery. The amphiphilic polymer is prepared by reversible addition-fragmentation chain transfer (RAFT) polymerization, and the peptide antigens are conjugated to the pH-sensitive hydrophobic block through the reversible disulfide linkage for selective release after cell entry. The polymer-peptide conjugates self-assemble into sub-100 nm micelles at physiological pH and dissociate at endosomal pH. The mannosylated micellar corona increases the accumulation of vaccine cargoes in the draining inguinal lymph nodes and facilitates nanoparticle uptake by professional antigen presenting cells. In vivo studies demonstrate that the mannosylated micelle formulation improves dendritic cell activation and enhances antigen-specific T cell responses, resulting in higher antitumor immunity in tumor-bearing mice compared to free peptide antigen. The mannosylated polymer is therefore a simple and promising platform for the delivery of peptide cancer vaccines.

The generation of anti-PEG antibodies in response to PEGylated proteins, peptides, and carriers significantly limits their clinical applicability. IgM antibodies mediate the clearance of these therapeutics upon repeat injection, resulting in toxicity and hindered therapeutic efficacy. We observed this phenomenon in our polymer platform, virus-inspired polymer for endosomal release (VIPER), which employs pH-sensitive triggered display of a lytic peptide, melittin, to facilitate endosomal escape. While the polymer-peptide conjugate was well tolerated after a single injection, we observed unexpected mortality upon repeat injection. Thus, the goal of this work was to enhance the safety and tolerability of VIPER for frequent dosing. Based on previous reports on anti-PEG antibodies and the adjuvant activity of melittin, we characterized the antibody response to polymer, peptide, and polymer-peptide conjugates after repeat-dosing and measured high IgM titers that bound PEG. By substituting the L-amino acid peptide for its D-amino acid enantiomer, we significantly attenuated the anti-PEG antibody generation and toxicity, permitting repeat-injections. We attempted to rescue mice from L-melittin induced toxicity by prophylactic injection of platelet activating factor (PAF) antagonist CV-6209, but observed minimal effect, suggesting that PAF is not the primary mediator of the observed hypersensitivity response. Overall, we demonstrated that the D-amino acid polymer-peptide conjugates, unlike L-amino acid polymer-peptide conjugates, exhibit good tolerability in vivo, even upon repeat administration, and do not elicit the generation of anti-PEG antibodies.

Traumatic brain injury (TBI) is largely non-preventable and often kills or permanently disables its victims. Because current treatments for TBI merely ameliorate secondary effects of the initial injury like swelling and hemorrhaging, strategies for the induction of neuronal regeneration are desperately needed. Recent discoveries regarding the TBI-responsive migratory behavior and differentiation potential of neural progenitor cells (NPCs) found in the subventricular zone (SVZ) have prompted strategies targeting gene therapies to these cells to enhance neurogenesis after TBI. We have previously shown that plasmid polyplexes can non-virally transfect SVZ NPCs when directly injected in the lateral ventricles of uninjured mice. We describe the first reported intracerebroventricular transfections mediated by polymeric gene carriers in a murine TBI model and investigate the anatomical parameters that dictate transfection through this route of administration. Using both luciferase and GFP plasmid transfections, we show that the time delay between injury and polyplex injection directly impacts the magnitude of transfection efficiency, but that overall trends in the location of transfection are not affected by injury. Confocal microscopy of quantum dot-labeled plasmid uptake in vivo reveals association between our polymers and negatively charged NG2 chondroitin sulfate proteoglycans of the SVZ extracellular matrix. We further validate that glycosaminoglycans but not sulfate groups are required for polyplex uptake and transfection in vitro. These studies demonstrate that non-viral gene delivery is impacted by proteoglycan interactions and suggest the need for improved polyplex targeting materials that penetrate brain extracellular matrix to increase transfection efficiency in vivo.

Cell therapy for spinal cord injuries offers the possibility of replacing lost cells after trauma to the central nervous system (CNS). In preclinical studies, synthetic hydrogels are often co-delivered to the injury site to support survival and integration of the transplanted cells. These hydrogels ideally mimic the mechanical and biochemical features of a healthy CNS extracellular matrix while also providing the possibility of localized drug delivery to promote healing. In this work, we synthesize peptide-functionalized polymers that contain both a peptide sequence for incorporation into self-assembled peptide hydrogels along with bioactive peptides that inhibit scar formation. We demonstrate that peptide hydrogels formulated with the peptide-functionalized polymers possess similar mechanical properties (soft and shear-thinning) as peptide-only hydrogels. Small angle neutron scattering analysis reveals that polymer-containing hydrogels possess larger inhomogeneous domains but small-scale features such as mesh size remain the same as peptide-only hydrogels. We further confirm that the integrated hydrogels containing bioactive peptides exhibit thrombin inhibition activity, which has previously shown to reduce scar formation in vivo. Finally, while the survival of encapsulated cells was poor, cells cultured on the hydrogels exhibited good viability. Overall, the described composite hydrogels formed from self-assembling peptides and peptide-modified polymers are promising, user-friendly materials for CNS applications in regeneration.

Endocytosed biomacromolecule delivery systems must escape the endosomal trafficking pathway in order for their cargo to exert effects in other cellular compartments. Although endosomal release is well-recognized as one of the greatest barriers to efficacy of biologic drugs with intracellular targets, most drug carriers have relied on cationic materials that passively induce endosomal swelling and membrane rupture with low efficiency. To address the endosome release challenge, our lab has developed a diblock copolymer system for nucleic acid delivery that selectively displays a potent membrane-lytic peptide (melittin) in response to the pH drop during the endosomal maturation. To further optimize this system, we evaluated a panel of peptides with reported lytic activity in comparison to melittin. Nineteen different lytic peptides were synthesized and their membrane-lytic properties at both neutral and acidic pH characterized using a red blood cell hemolysis assay. The top five performing peptides were then conjugated to our pH-sensitive diblock copolymer via disulfide linkers and used to deliver a variety of nucleic acids to cultured mammalian cells as well as in vivo to the mouse brain. We demonstrate that the sharp pH-transition of VIPER compensates for potential advantages from pH-sensitive peptides, such that polymer-peptide conjugates with poorly selective but highly lytic peptides achieve safe and effective transfection both in vitro and in vivo. In addition, peptides that require release from polymer backbones for lysis were less effective in the VIPER system, likely due to limited endosomal reducing power of target cells. Finally, we show that certain peptides are potentiated in lytic ability by polymer conjugation and that these peptide-polymer constructs are most effective in vivo.

Progressive loss of glomerular podocytes during kidney disease leads to irreversible kidney failure, and is exacerbated by the fact that podocytes are terminally differentiated epithelial cells and unable to proliferate. Regeneration of lost podocytes must therefore derive from nonpodocyte sources. Human urine-derived renal progenitor cells (uRPCs) are attractive podocyte progenitors for cell therapy applications due to their availability from patient urine and ability to migrate to injured glomeruli and differentiate into de novo podocytes after intravenous administration. Because gene delivery has emerged as an important strategy to augment the functionality and survival of cell therapies prior to injection, in this work we optimized nonviral gene delivery conditions (cell density, DNA dose, % FBS, and transfection material composition) to primary uRPCs. Using the cationic polymer-peptide conjugate VIPER for gene delivery and the Sleeping Beauty transposon/transposase constructs for gene integration, we optimized transfection parameters to achieve efficient transgene expression (up to 55% transfected cells) and stable transgene expression (>65% integration efficiency) lasting up to 10 days. With these methods, we transfected uRPCs to overexpress CXCR4, an important chemokine receptor that mediates uRPC migration to the kidneys after intravenous injection, and demonstrate that CXCR4-uRPCs exhibit enhanced migration compared to mock-transfected cells.

While biologic drugs such as proteins, peptides, or nucleic acids have shown promise in the treatment of neurodegenerative diseases, the blood-brain barrier (BBB) severely limits drug delivery to the central nervous system (CNS) after systemic administration. Consequently, drug delivery challenges preclude biological drug candidates from the clinical armamentarium. In order to target drug delivery and uptake into to the CNS, we used an in vivo phage display screen to identify peptides able to target drug-uptake by the vast array of neurons of the autonomic nervous system (ANS). Using next-generation sequencing, we identified 21 candidate targeted ANS-to-CNS uptake ligands (TACL) that enriched bacteriophage accumulation and delivered protein-cargo into the CNS after intraperitoneal (IP) administration. The series of TACL peptides were synthesized and tested for their ability to deliver a model enzyme (NeutrAvidin-horseradish peroxidase fusion) to the brain and spinal cord. Three TACL-peptides facilitated significant active enzyme delivery into the CNS, with limited accumulation in off-target organs. Peptide structure and serum stability is increased when internal cysteine residues are cyclized by perfluoroarylation with decafluorobiphenyl, which increased delivery to the CNS further. TACL-peptide was demonstrated to localize in parasympathetic ganglia neurons in addition to neuronal structures in the hindbrain and spinal cord. By targeting uptake into ANS neurons, we demonstrate the potential for TACL-peptides to bypass the blood-brain barrier and deliver a model drug into the brain and spinal cord.

The nonviral delivery of exogenous nucleic acids (NA) into cells for therapeutic purposes has rapidly matured into tangible clinical impact. Synthetic polymers are particularly attractive vectors for NA delivery due to their relatively inexpensive production compared to viral alternatives and their highly tailorable chemical properties; indeed, many preclinical investigations have revealed the primary biological barriers to nonviral NA delivery by systematically varying polymeric material properties. This review focuses on applications of pH-sensitive chemistries that enable polymeric vectors to serially address multiple biological barriers to NA delivery. In particular, we focus on recent innovations with in vivo evaluation that dynamically enable colloidal stability, cellular uptake, endosomal escape, and nucleic acid release. We conclude with a summary of successes to date and projected areas for impactful future research.

To facilitate scalable profiling of single cells, we developed split-pool ligation-based transcriptome sequencing (SPLiT-seq), a single-cell RNA-seq (scRNA-seq) method that labels the cellular origin of RNA through combinatorial barcoding. SPLiT-seq is compatible with fixed cells or nuclei, allows efficient sample multiplexing, and requires no customized equipment. We used SPLiT-seq to analyze 156,049 single-nucleus transcriptomes from postnatal day 2 and 11 mouse brains and spinal cords. More than 100 cell types were identified, with gene expression patterns corresponding to cellular function, regional specificity, and stage of differentiation. Pseudotime analysis revealed transcriptional programs driving four developmental lineages, providing a snapshot of early postnatal development in the murine central nervous system. SPLiT-seq provides a path toward comprehensive single-cell transcriptomic analysis of other similarly complex multicellular systems.

The block copolymer VIPER (virus-inspired polymer for endosomal release) has been reported to be a promising novel delivery system of DNA plasmids both in vitro and in vivo. VIPER is comprised of a polycation segment for condensation of nucleic acids as well as a pH-sensitive segment that exposes the membrane lytic peptide melittin in acidic environments to facilitate endosomal escape. The objective of this study was to investigate VIPER/siRNA polyplex characteristics, and compare their in vitro and in vivo performance with commercially available transfection reagents and a control version of VIPER lacking melittin. VIPER/siRNA polyplexes were formulated and characterized at various charge ratios and shown to be efficiently internalized in cultured cells. Target mRNA knockdown was confirmed by both flow cytometry and qRT-PCR and the kinetics of knockdown was monitored by live cell spinning disk microscopy, revealing knockdown starting by 4 h post-delivery. Intratracheal instillation of VIPER particles formulated with sequence specific siRNA to the lung of mice resulted in a significantly more efficient knockdown of GAPDH compared to treatment with VIPER particles formulated with scrambled sequence siRNA. We also demonstrated using pH-sensitive labels that VIPER particles experience less acidic environments compared to control polyplexes. In summary, VIPER/siRNA polyplexes efficiently deliver siRNA in vivo resulting in robust gene silencing (>75% knockdown) within the lung.

Cationic polymer gene delivery vehicles that effectively resist premature serum degradation often have difficulty releasing their nucleic acid cargoes. In this work, we report a pH-sensitive polymer (SP), poly(oligo(ethylene glycol) monomethyl ether methacrylate)-co-poly(2-(dimethylamino)ethyl methacrylate)-block- poly(propargyl methacrylate-graft-propyl-(4-methoxy-benzylidene)-amine) (p(PMA-PMBA)-b-(p(OEGMA-DMAEMA)), for successful in vitro and in vivo gene transfer. In the physiological condition, the hydrophobization of p(OEGMA-DMAEMA) polycations by p(PMA-PMBA) significantly enhanced the stability of its polyplexes counterpart. In endosomes, the polymer undergoes an acid-triggered hydrophilic transition through the cleavage of benzoic imines, thus allowing the vector to quickly release nucleic acid cargo due to the loss of hydrophobic functionalization. Compared to a pH-insensitive polymer (IP), SP exhibited more significant luciferase plasmid delivery efficiency with HeLa cells in vitro and with in vivo intraventricular brain injections. Therefore, the polymer designed here is a good solution to address the dilemma of stability and cargo release in gene delivery, and may have broad potential applications in therapeutic agent delivery.