Understanding how spiral structures influence the chemical evolution of the Galactic disc remains a key issue in Galactic archaeology. Recent advances in two-dimensional chemical evolution modeling allow us to account for the impact of multiple spiral arm patterns, each characterized by different pattern speeds, on the redistribution of elements throughout the Galaxy. In this work, we explore the influence of multi-pattern spiral arms on the radial abundance gradients of heavy elements in the Galactic disc. We focus on a scenario in which, during the most recent stage of evolution, corotation spans the entire disc. Our results indicate that the observed dispersion in the abundance gradients of O, Fe, Eu, and Ba, as traced by Cepheids, can be successfully reproduced if all galactocentric radii have effectively acted as corotation regions over the past 1–3 Gyr. We also note that such an extended phase has previously been identified as necessary to explain the azimuthal abundance variations reported in Gaia DR3 and Gaia-ESO survey data along local and inner spiral arms.

Surveys of Galactic halo stars have revealed numerous streams and substructures tracing stellar populations accreted by the Milky Way. Among these, Gaia-Sausage-Enceladus (GSE) and Sequoia are the most prominent, both associated with dwarf galaxies accreted about 10 Gyr ago. We aim to measure beryllium abundances in nine stars associated with Thamnos, a substructure possibly linked to Sequoia, following the discovery of a Be-rich star BPM3066 by Monaco et al (2025). We used Gaia photometry and parallaxes to compute ATLAS9 model atmospheres. Synthetic spectra were generated with Turbospectrum and used with MyGIsFOS in single-model mode to analyze UVES high resolution spectra. Four new stars exhibit a significant beryllium overabundance. Moreover, the two known Be-rich stars, HD 106038 and HD 132475, are also found consistent with Thamnos membership. Thus, all currently known Be-rich stars appear associated with the Thamnos-2 structure. The Be enhancement is accompanied by elevated Si abundances, and we detect a correlation between Be and neutron-capture elements. No comparable Be-rich population is known elsewhere in the Galaxy, pointing to a rare enrichment event. The measured A(Be)/A(Li) excess ratio bears the imprint of spallation reactions, pointing to a highly energetic event in which fast CNO nuclei fragmented upon collision with the surrounding medium. The silicon overabundance is also consistent with a hypernova origin. Such an event may have rapidly enriched the surrounding gas to [Fe/H] about -1.5 explaining the relatively high metallicities of stars formed from this material despite their old ages (about 13 Gyr).

Neutron capture reactions provide essential nuclear physics input for modeling the synthesis of heavy elements in stars. The growing precision of stellar spectroscopy and isotopic measurements in presolar SiC grains now demands cross sections with improved accuracy over the full energy range, and access to unstable nuclei relevant to slow (s-) process branchings and the intermediate (i-) process. This article reviews recent progress in direct neutron capture measurements, focusing on time-of-flight (TOF) experiments at CERN n_TOF and complementary activation techniques. Substantial advances have been achieved for stable s-only and bottleneck isotopes, significantly improving constraints on s-process models. In parallel, the combination of high instantaneous neutron fluxes and advanced detector systems has facilitated first-time neutron capture measurements on several radioactive branching-point nuclei. Feasibility studies, however, reveal current limitations related to sample availability, background conditions, and restricted energy coverage. In this context, the complementarity between TOF and activation emerges as a central strategy. Future developments, including high-flux facilities and novel inverse kinematics experiments in ion storage rings, are expected to extend the boundaries of neutron capture measurements, overcoming current limitations and helping unlock new frontiers in our understanding of stellar nucleosynthesis.

The neutron capture cross section of 64Ni is an important parameter in nuclear astrophysics that is needed to accurately simulate stellar nucleosynthesis and validate stellar models. 64Ni is among the seeds of the s-process and its capture cross section has been found to have an important effect on the predicted abundances of many nuclei synthesized in Asymptotic Giant Branch (AGB) and massive stars. Despite its relevance, the measurements of the 64Ni(n,γ) available in the literature are scarce and discrepant. For this reason, a new accurate time-of-flight measurement has been performed at the n_TOF facility at CERN, taking advantage of its high instantaneous neutron flux, and using a highly enriched 64Ni sample. The first preliminary results show important discrepancies with respect to the cross sections recommended in the most recent releases of the evaluated nuclear data libraries. In particular, a large resonance reported at 9.52 keV is not observed. As a consequence, a significant reduction in the Maxwellian-Averaged Cross Section (MACS) obtained from evaluated data libraries in the 5–25 keV thermal energy region is expected.

Only recently, observational studies have started providing measurements for the barium isotopic ratio in metal-poor stars with unprecedented detail. This new approach can be extremely useful in tracing back the origin of neutron-capture elements, since the r- and s-process produce different amounts of barium isotopes, and their astrophysical sites of production are still largely unconstrained. We employ here a stochastic chemical evolution model of the Galactic halo to compare observations to theoretical predictions. We find that in the earliest phases of evolution, both r- and s-process sites are required, with the model and observations agreeing well for Sr, Ba and Eu, possibly requiring a slightly larger s-process production for Sr. The model can actually explain the mixture of r- and s-process material often observed in halo stars. This work shows how is it possible now to use isotopic ratios in addition to elemental ratios to obtain additional constraints useful for the Galactic Archaeology investigation.

This White Paper presents the scientific rationale and instrument concept for HRMOS (High-Resolution Multi-Object Spectrograph), a next-generation instrument proposed for the ESO Very Large Telescope within the VLT 2030 roadmap. Current and planned facilities offer either multi-object spectroscopy or ultra-high spectral resolution, but not both. HRMOS fills this gap by combining very high spectral resolution, multi-object capability, and radial-velocity stability, enabling transformative studies in Galactic and extragalactic astrophysics. The baseline design provides a resolving power of R = 80000, radial-velocity precision of 10 m s-1 (goal: 5 m s-1), simultaneous observations of 50-60 targets, and broad optical coverage down to 385 nm. These capabilities enable precise measurements of elemental abundances, isotopic ratios, line profiles, and radial velocities for large stellar samples, including crowded fields, star clusters, the Galactic bulge, and nearby dwarf galaxies. HRMOS will address key questions on the age of the oldest stellar populations through nucleocosmochronology, the formation and survival of planetary systems, the assembly history of the Milky Way and satellites, the origin of the heaviest elements, stellar evolution, and the chemical and dynamical properties of the interstellar and circumgalactic medium. It will bridge large spectroscopic surveys and the next generation of extremely large telescopes, with strong synergies with 4MOST, Gaia, TESS, PLATO, the proposed Haydn mission, and future ELT instruments. Building on VLT/FLAMES heritage, HRMOS represents a strategic investment for European astronomy in the 2030s.

The [Ba/Eu] abundance ratio is commonly adopted as a tracer of the relative contributions of the slow (s) and rapid (r) neutron-capture processes. However, at [Fe/H] < -2 dex, Ba can be produced efficiently by both processes, rendering [Ba/Eu] non-deterministic. We propose to use barium isotopic ratio from the fitting of resonance Ba line profiles affected by hyperfine splitting. This approach requires precise atomic and stellar parameters, together with advanced spectral modelling, which, so far, remained insufficiently validated. We aim to provide a robust prescription of line-profile modelling for a reliable determination of the s- and r-processes fractions of barium in ordinary and peculiar stars. We assess the performance of 1D LTE and 1D non-LTE synthesis, and 3D non-LTE abundance corrections to model Ba lines. Alongside barium abundances and its isotopic ratios, we determine Eu and other neutron-capture element abundances to validate the method in the Titans metal-poor benchmark stars. The observational results are compared with the predictions of stochastic Galactic chemical evolution models that account the inhomogeneous mixing in the early times. We find that 1D LTE and 3D non-LTE Ba abundance determinations are equivalent, whereas the 1D non-LTE approach leads to systematic underestimations. These underestimations bias isotopic fractions toward higher r-process contributions. The inferred s- and r-process fractions demonstrate that [Ba/Eu] alone is an ambiguous tracer for ordinary stars within the range -0.8 < [Ba/Eu] < 0 dex. The comparison of our set of models, both for the proto-Milky Way halo and for Gaia-Enceladus galaxy is used to put constraints on the production of Ba at low [Fe/H], especially evaluating the role of rotating massive stars. The method here developed can be applied with confidence to both ordinary stars and peculiar stars enhanced in barium.

Chemical clocks based on [s-process elements/alpha-elements] ratios are widely used to estimate ages of Galactic stellar populations. However, the [s/alpha] vs. age relations are not universal, varying with metallicity, location in the Galactic disc, and specific s-process elements. Current Galactic chemical evolution models struggle to reproduce the observed [s/alpha] increase at young ages. We provide chemical evolution models for the Milky Way disc to identify the conditions required to reproduce the observed [s/H], [s/Fe], and [s/alpha] vs. age relations. We adopt a multi-zone chemical evolution model including state-of-the-art nucleosynthesis prescriptions for neutron-capture elements (AGB stars, rotating massive stars, neutron star mergers, magneto-driven supernovae). We explore variations in gas infall, AGB yield dependencies on progenitor stars, and rotational velocity distributions for massive stars. Results are compared with open cluster data from the Gaia-ESO survey. A three-infall scenario for disc formation captures the rise of [s/alpha] with age in the outer regions but fails in the inner ones, especially for second s-process peak elements. Ba production in the last 3 Gyr of chemical evolution would need to increase by half to match observations. S-process contributions from low-mass AGB stars improve predictions but require increases not supported by nucleosynthesis calculations, even with potential i-process contribution. Variations in the metallicity dependence of AGB yields show inconsistent effects across elements. Distributions of massive star rotational velocities fail to improve results due to balanced effects on elements. We confirm that there is no single relationship [s/alpha] vs. age, but that it varies along the MW disc. Current prescriptions for neutron-capture element yields cannot fully capture the complexity of evolution, particularly in the inner disc.

Chemical clocks, based on age-sensitive stellar abundance ratios, offer a powerful and scalable approach to reconstruct the formation history of the Milky Way. This white paper outlines how wide-field, high-resolution spectroscopy can transform chemical clocks into precise and broadly applicable stellar age estimators when combined with astrometry and asteroseismology. We summarize the current limitations, including calibration across Galactic environments and the impact of internal stellar evolution, and define the observational requirements needed to overcome them. The Wide-field Spectroscopic Telescope (WST), with its large field of view, high multiplex, and broad wavelength coverage at high spectral resolution, is uniquely suited to deliver the homogeneous datasets required to map the age structure of the Galaxy at unprecedented scale. Such a capability will enable decisive progress in Galactic archaeology and stellar evolution studies.

A new experimental area, the NEAR station, has recently been built at the CERN n TOF facility, at a short distance from the spallation target (1.5 m). The new area, characterized by a neutron beam of very high flux, has been designed with the purpose of performing activation measurements of interest for astrophysics and various applications. The beam is transported from the spallation target to the NEAR station through a hole in the shielding wall of the target, inside which a collimator is inserted. The new area is complemented with a γ-ray spectroscopy laboratory, the GEAR station, equipped with a high efficiency HPGe detector, for the measurement of the activity resulting from irradiation of a sample in the NEAR station. The use of a moderator/filter assembly is envisaged, in order to produce a neutron beam of Maxwellian shape at different thermal energies, necessary for the measurement of Maxwellian Averaged Cross Sections of astrophysical interest. A new fast-cycling activation technique is also being investigated, for measurements of reactions leading to isotopes of very short half life.

Challenging neutron-capture cross-section measurements of small cross sections and samples with a very limited number of atoms require high-flux time-of-flight facilities. In turn, such facilities need innovative detection setups that are fast, have low sensitivity to neutrons, can quickly recover from the so-called γ-flash, and offer the highest possible detection sensitivity. In this paper, we present several steps toward such advanced systems. Specifically, we describe the performance of a high-sensitivity experimental setup at CERN n_TOF EAR2. It consists of nine sTED detector modules in a compact cylindrical configuration, two conventional used large-volume C6D6 detectors, and one LaCl3(Ce) detector. The performance of these detection systems is compared using 93Nb(n, γ) data. We also developed a detailed Geant4 Monte Carlo model of the experimental EAR2 setup, which allows for a better understanding of the detector features, including their efficiency determination. This Monte Carlo model has been used for further optimization, thus leading to a new conceptual design of a γ detector array, STAR, based on a deuterated-stilbene crystal array. Finally, the suitability of deuterated-stilbene crystals for the future STAR array is investigaged experimentally utilizing a small stilbene-d12 prototype. The results suggest a similar or superior performance of STAR with respect to other setups based on liquid-scintillators, and allow for additional features such as neutron-gamma discrimination and a higher level of customization capability.

Context. The chemical evolution of fluorine is still a matter of debate in Galactic archaeology, especially at low metallicities, where it is particularly challenging to obtain the corresponding chemical abundances from observations. Aims. We present here the first detailed theoretical study of the chemical evolution of fluorine at low metallicities using a stochastic chemical evolution model for the Galactic halo, in light of the most recent data for fluorine, which include observations at lower metallicities down to [Fe/H]∼ −4 dex, more than a factor of 10 lower than previous detections. Methods. We employed a state-of-the-art stochastic chemical evolution model to follow the evolution in the Galactic halo, which has been shown to reproduce the main observables in this Galactic component and the abundance patterns of CNO and neutron-capture elements, and we implemented nucleosynthesis prescriptions for fluorine, focusing on the chemical evolution of this element. Results. By comparing recent observations with model predictions, we confirm the importance of rotating massive stars at low metallicities to explain both the [F/Fe] versus [Fe/H] and [F/O] versus [O/H] diagrams. In particular, we show that we can reach a high [F/Fe] of ∼2 dex at an [Fe/H] of approximately −4 dex, in agreement with recent observations at the lowest metallicities. Conclusions. With a stochastic chemical evolution model for the Galactic halo, we confirm the importance of rotating massive stars as fluorine producers, as suggested in previous studies that used chemical evolution models for the Galactic disc. We also expect an important production of F at high redshifts, in agreement with recent detections of super-solar N by JWST. Further data for fluorine at low metallicities, and also at high redshifts, are needed to put further constraints on the chemical evolution of fluorine and for comparison with our theoretical predictions.

One of the critical aspects for the accurate determination of neutron capture cross sections when combining time-of-flight and total energy detector techniques is the characterization and control of systematic uncertainties associated to the measuring devices. In this work we explore the most conspicuous effects associated to harsh count rate conditions: dead-time and pile-up effects. Both effects, when not properly treated, can lead to large systematic uncertainties and bias in the determination of neutron cross sections. In the majority of neutron capture measurements carried out at the CERN n_TOF facility, the detectors of choice are the C6D6 liquid-based either in form of large-volume cells or recently commissioned sTED detector array, consisting of much smaller-volume modules. To account for the aforementioned effects, we introduce a Monte Carlo model for these detectors mimicking harsh count rate conditions similar to those happening at the CERN n_TOF 20 m fligth path vertical measuring station. The model parameters are extracted by comparison with the experimental data taken at the same facility during 2022 experimental campaign. We propose a novel methodology to consider both, dead-time and pile-up effects simultaneously for these fast detectors and check the applicability to experimental data from 197Au(n, γ), including the saturated 4.9 eV resonance which is an important component of normalization for neutron cross section measurements.

Background: The Yb-176(n, gamma)Yb-177 -> 177Lu reaction is of interest in nuclear medicine as it is the preferred production route for 177Lu. This radioisotope has seen a very fast growth of usage in nuclear medicine in recent years due to its outstanding properties. New data on this reaction could provide useful information for production at new facilities. Purpose: We aim to resolve resonances in the Yb-176(n, gamma)Yb-177 reaction for the first time. Previous capture measurement provided data at thermal point and encompassed integral measurements in the range from 3 keV to 1 MeV, where three time-of-flight measurements are available, but with low resolution to resolve the resonances. Transmission measurements from the 1970s resolved and analyzed some resonances. Method: We measure the neutron capture cross section of Yb-176(n, gamma)Yb-177 by means of the time-of-flight technique at the Experimental Area 1 of the n_TOF facility at CERN using an enriched (Yb2O3)-Yb-176 sample and an array of four C6D6 liquid scintillation detectors. Results: We have resolved 164 resonances up to 21 keV, including 96 new ones. We also provide new capture experimental data from 90 eV to 3 keV, and we extend the resolved resonance region up to 21 keV. In addition, resonance decay widths, Gamma(gamma) and Gamma(n), are provided for all resonances together with resonance energies. Conclusions: The Yb-176(n, gamma) Yb-177 reaction has been measured, providing resonance parameters for the first time from a few eV to 21 keV. The analysis of the resonances has been carried out and compared with previous works and existing libraries, revealing discrepancies due to the new information on Gamma(gamma) parameters. Our results are consistent with the Gamma(n) parameters obtained in transmission measurements.

In the era of Extremely Large Telescopes, the current generation of 8-10m facilities are likely to remain competitive at ground-UV wavelengths for the foreseeable future. The Cassegrain U-Band Efficient Spectrograph (CUBES) has been designed to provide high instrumental efficiency ( > 37%) observations in the near UV (305-400 nm requirement, 300-420 nm goal) at a spectral resolving power of R > 20, 000 (with a lower-resolution, sky-limited mode of R similar to 7, 000). With the design focusing on maximizing the instrument throughput (ensuring a Signal to Noise Ratio - SNR- similar to 20 per spectral resolution element at 313 nm for U similar to 17.5 mag objects in 1h of observations), it will offer new possibilities in many fields of astrophysics: i) access to key lines of stellar spectra (e.g. lighter elements, in particular Beryllium), extragalactic studies (e.g. circumgalactic medium of distant galaxies, cosmic UV background) and follow-up of explosive transients. We present the CUBES instrument design, currently in Phase-C and approaching the final design review, summarizing the hardware architecture and interfaces between the different subsystems as well as the relevant technical requirements. We describe the optical, mechanical, electrical design of the different subsystems (from the telescope adapter and support structure, through the main opto-mechanical path, including calibration unit, detector devices and cryostat control, main control electronics), detailing peculiar instrument functions like the Active Flexure Compensation (AFC). Furthermore, we outline the AIT/V concept and the main instrument operations giving an overview of its software ecosystem. Installation at the VLT is planned for 2028/2029 and first science operations in late 2029.

Stars move away from their birthplaces over time via a process known as radial migration, which blurs chemo-kinematic relations used for reconstructing the Milky Way (MW) formation history. To understand the true time evolution of the MW, one needs to take into account the effects of this process. We show that stellar birth radii can be derived directly from the data with minimum prior assumptions on the Galactic enrichment history. This is done by first recovering the time evolution of the stellar birth metallicity gradient, $d\mathrm{[Fe/H]}(R, \tau)/dR$, through its inverse relation to the metallicity range as a function of age today, allowing us to place any star with age and metallicity measurements back to its birthplace, $R_b$. Applying our method to a large, high-precision data set of MW disk subgiant stars, we find a steepening of the birth metallicity gradient from 11 to 8 Gyr ago, which coincides with the time of the last massive merger, Gaia-Sausage-Enceladus (GSE). This transition appears to play a major role in shaping both the age-metallicity relation and the bimodality in the [$\alpha$/Fe]-[Fe/H] plane. By dissecting the disk into mono-$R_b$ populations, clumps in the low-[$\alpha$/Fe] sequence appear, which are not seen in the total sample and coincide in time with known star-formation bursts, possibly associated with the Sagittarius Dwarf Galaxy. We estimated that the Sun was born at $4.5\pm 0.4$~kpc from the Galactic center. Our $R_b$ estimates provide the missing piece needed to recover the Milky Way formation history.

Context. The chemical evolution history of slow neutron-capture elements in the Milky Way is still a matter of debate, especially in the metal-poor regime ([Fe/H] < -1). Aims. Based on Gaia-ESO spectroscopic data, a recent study investigated the chemical evolution of neutron-capture elements in the regime [Fe/H] > -1. Here, we aim to complement this study down to [Fe/H] = -3, and focus on Ba, Y, and Sr, along with the abundance ratios of [Ba/Y] and [Sr/Y], which give comprehensive views on s-process nucleosynthesis channels. Methods. We measured the local thermodynamic equilibrium (LTE) and non-local thermodynamic equilibrium (NLTE) abundances of Ba, Y, and Sr in 323 Galactic metal-poor stars using high-resolution optical spectra with high signal-to-noise ratios. We used the spectral fitting code TSFitPy together with 1D model atmospheres, using previously determined LTE and NLTE atmospheric parameters. Results. We find that the NLTE effects are on the order of similar to- 0.1 to similar to 0.2 dex, depending on the element. We find that stars enhanced (deficient) in [Ba/Fe] and [Y/Fe] are also enhanced (deficient) in [Sr/Fe], suggesting a common evolution channel for these three elements. We find that the ratio between heavy and light s-process elements [Ba/Y] varies weakly with [Fe/H] even in the metal-poor regime, which is consistent with the behaviour in the metal-rich regime. The [Ba/Y] scatter at a given metallicity is larger than the abundance measurement uncertainties. Homogeneous chemical evolution models with different yield prescriptions are not able to accurately reproduce the [Ba/Y] scatter in the low-[Fe/H] regime. Adopting the stochastic chemical evolution model by Cescutti & Chiappini allows us to reproduce the observed scatter in the abundance pattern of [Ba/Y] and [Ba/Sr]. Based on our observations, we have ruled out the need for an arbitrary scaling of the r-process contribution, as previously suggested by the authors behind the construction of the model. Conclusions. We show how important it is to properly include NLTE effects when measuring chemical abundances, especially in the metal-poor regime. This work demonstrates that the choice of the Galactic chemical evolution model (stochastic versus one-zone) is key when comparing models to observations. Upcoming large-scale spectroscopic surveys such as 4MOST and WEAVE are poised to deliver high-quality data for many thousands of metal-poor stars and this work gives a typical case study of what could be achieved with such surveys in the future.

The MINCE (Measuring at Intermediate metallicity Neutron-Capture Elements) project aims to gather the abundances of neutron-capture elements but also of light elements and iron peak elements in a large sample of giant stars in this metallicity range. T The aim of this work is to study the chemical evolution of galactic sub-components recently identified (i.e. Gaia Sausage Enceladus (GSE), Sequoia). We used high signal-to-noise ratios, high-resolution spectra and standard 1D LTE spectrum synthesis to determine the detailed abundances. We could determine the abundances for up to 10 neutron-capture elements (Sr, Y, Zr, Ba, La, Ce, Pr, Nd, Sm and Eu) in 33 stars. The general trends of abundance ratios [n-capture element/Fe] versus [Fe/H] are in agreement with the results found in the literature. When our sample is divided in sub-groups depending on their kinematics, we found that the run of [Sr/Ba] vs [Ba/H] for the stars belonging to the GSE accretion event shows a tight anti-correlation. The results for the Sequoia stars, although based on a very limited sample, shows a [Sr/Ba] systematically higher than the [Sr/Ba] found in the GSE stars at a given [Ba/H] hinting at a different nucleosynthetic history. Stochastic chemical evolution models have been computed to understand the evolution of the GSE chemical composition of Sr and Ba. The first conclusions are that the GSE chemical evolution is similar to the evolution of a dwarf galaxy with galactic winds and inefficient star formation. Detailed abundances of neutron-capture elements have been measured in high-resolution, high signal-to-noise spectra of intermediate metal-poor stars, the metallicity range covered by the MINCE project. These abundances have been compared to detailed stochastic models of galactic chemical evolution.

The neutron Time-of-Flight facility (n_TOF) is an innovative facility operative since 2001 at CERN, with three experimental areas. In this paper the n_TOF facility will be described, together with the upgrade of the facility during the Long Shutdown 2 at CERN. The main features of the detectors used for capture fission cross section measurements will be presented with perspectives for the future measurements.