The contact between liquid drops and hot solid surfaces is of practical importance for industrial processes, such as thermal spraying and spray cooling. The contact and bouncing of solid spheres is also an important event encountered in ball milling, powder processing, and everyday activities, such as ball sports. Using high speed video microscopy, we demonstrate that hydrogel drops, initially at rest on a surface, spontaneously jump upon rapid heating and continue to bounce with increasing amplitudes. Jumping is governed by the surface wettability, surface temperature, hydrogel elasticity, and adhesion. A combination of low-adhesion impact behavior and fast water vapor formation supports continuous bouncing and trampolining. Our results illustrate how the interplay between solid and liquid characteristics of hydrogels results in intriguing dynamics, as reflected by spontaneous jumping, bouncing, trampolining, and extremely short contact times.

Remotely controlling the movement of small objects is desirable, especially for the transportation and selection of materials. Transfer of objects between liquid and solid surfaces and triggering their release would allow for development of novel material transportation technology. Here, we describe the remote transport of a material from a water film surface to a solid surface using quasispherical liquid marbles (LMs). A light-induced Marangoni flow or an air stream is used to propel the LMs on water. As the LMs approach the rim of the water film, gravity forces them to slide down the water rim and roll onto the solid surface. Through this method, LMs can be efficiently moved on water and placed on a solid surface. The materials encapsulated within LMs can be released at a specific time by an external stimulus. We analyzed the velocity, acceleration, and force of the LMs on the liquid and solid surfaces. On water, the sliding friction due to the drag force resists the movement of the LMs. On a solid surface, the rolling distance is affected by the surface roughness of the LMs.

Super nonfouling surfaces resist protein adhesion and have a broad field of possible applications in implant technology, drug delivery, blood compatible materials, biosensors, and marine coatings. A promising route toward nonfouling surfaces involves liquid repelling architectures. The authors here show that soot-templated super-amphiphobic (SAP) surfaces prepared from fluorinated candle soot structures are super nonfouling. When exposed to bovine serum albumin or blood serum, x-ray photoelectron spectroscopy and time of flight secondary ion mass spectrometry analysis showed that less than 2 ng/cm(2) of protein was adsorbed onto the SAP surfaces. Since a broad variety of substrate shapes can be coated by soot-templated SAP surfaces, those are a promising route toward biocompatible materials design.

Remote control of the locomotion of small objects is a challenge in itself and may also allow for the stimuli control of entire systems. Here, it is described how encapsulated liquids, referred to as liquid marbles, can be moved on a water surface with a simple near‐infrared laser or sunlight. Using light rather than pH or temperature as an external stimulus allows for the control of the position, area, timing, direction, and velocity of delivery. This approach makes it possible to not only transport the materials encapsulated within the liquid marble but also to release them at a specific place and time, as controlled by external stimuli. Furthermore, it is shown that liquid marbles can work as light‐driven towing engines to push or pull objects. Being able to remotely transport and push/pull the small objects by light and control the release of active substances on demand should open up a wide field of conceivable applications.

Contamination of surfaces with organic compounds and biological residues still represents a broad challenge, ranging from industry and medicine to our daily lives. Superhydrophobic coatings are exceptionally water repellent and have self-cleaning properties. Water drops roll off when tilting the surface by a few degrees. However, low surface tension liquids like oils and other organic contaminants easily adhere to superhydrophobic surfaces. Recently developed superamphiphobic coatings may prevent this problem. Superamphiphobic coatings could not only prevent wetting of surfaces by oil but also delay the deposition of biological material such as cells, proteins and bacteria. In this chapter we discuss the wetting behaviour of superhydrophobic and superamphiphobic surfaces. We address topics beyond the fabrication, characterization and optimization process of super-liquid repellent surfaces and present possible applications, ranging from industry to medicine. The durability and the long-term stability of superhydrophobicity/superamphiphobicity still present major challenges, limiting their industrial use.

Light-driven delivery of materials using liquid marbles is described by H. Mayama, S. Fujii, and co-workers on page 3199, with the liquid marbles shown to work as light-driven towing engines. This approach allows for not only the transport of the materials encapsulated within the liquid marble but also their release at a specific place and at a time determined by external stimuli.

Surfaces with self‐cleaning properties are desirable for many applications. Conceptually, super liquid‐repellent surfaces are required to be highly porous on the nano‐ or micrometer scale, which inherently makes them mechanically weak. Optimizing the balance of mechanical strength and liquid repellency is a core aspect toward applications. However, quantitative mechanical testing of porous, super liquid‐repellent surfaces is challenging due to their high surface roughness at different length scales and low stress tolerance. For this reason, mechanical testing is often performed qualitatively. Here, the mechanical responses of soot‐templated super liquid‐repellent surfaces are studied qualitatively by pencil and finger scratching and quantitatively by atomic force microscopy, colloidal probe force measurements, and nanoindentation. In particular, colloidal probe force measurements cover the relevant force and length scales. The effective elastic modulus, the plastic work W plastic and the effective adhesive work W adhesive are quantified. By combining quantitative information from force measurements with measurements of surface wetting properties, it is shown that mechanical strength can be balanced against low wettability by tuning the reaction parameters.

The rheological properties of microliter sized drops of polymer solutions were investigated using measurements of their mechanical vibrational response. Drops were suspended on superamphiphobic substrates and vibrated by the application of a short mechanical impulse. Surface vibrations were monitored by refracting laser light through the drops and focusing the refracted light onto the surface of a photodiode. Time dependent variations in the photodiode output were Fourier transformed to obtain the frequency and spectral width of the mechanical resonances of the drops. These quantities were related to the frequency dependent shear storage and loss moduli (G' and G″, respectively) using a simple theoretical model. The resulting rheological properties were found to be in agreement with microrheology measurements of the same solutions. Drop vibration therefore provides a fast and accurate method of quantifying the rheological properties of single drops.

Keine Regentropfen mehr auf Brillenglasern und Autoscheiben, Flussigkeitsbehalter lassen sich ruckstandsfrei leeren – Oberflachen, von denen Flussigkeiten abperlen, sind praktisch. Welche Oberflachen gibt es schon heute, wofur konnen sie genutzt werden und welche Prinzipien stecken dahinter?

A method for mesoporous supraparticle synthesis on superamphiphobic surfaces is designed. Therefore, supraparticles assembled with nanoparticles are synthesized by the evaporation of nanoparticle dispersion drops on the superamphiphobic surface. For synthesis, no further purification is required and no organic solvents are wasted. Moreover, by changing the conditions such as drop size and concentration, supraparticles of different sizes, compositions, and architectures are fabricated.

Superhydrophobic surfaces are usually characterized by a high apparent contact angle of water drops in air. Here we analyze the inverse situation: Rather than focusing on water repellency in air, we measure the attractive interaction of air bubbles and superhydrophobic surfaces in water. Forces were measured between microbubbles with radii R of 40-90 μm attached to an atomic force microscope cantilever and submerged superhydrophobic surfaces. In addition, forces between macroscopic bubbles (R = 1.2 mm) at the end of capillaries and superhydrophobic surfaces were measured. As superhydrophobic surfaces we applied soot-templated surfaces, nanofilament surfaces, micropillar arrays with flat top faces, and decorated micropillars. Depending on the specific structure of the superhydrophobic surfaces and the presence and amount of entrapped air, different interactions were observed. Soot-templated surfaces in the Cassie state showed superaerophilic behavior: Once the electrostatic double-layer force and a hydrodynamic repulsion were overcome, bubbles jumped onto the surface and fully merged with the entrapped air. On nanofilaments and micropillar arrays we observed in addition the formation of sessile bubbles with finite contact angles below 90° or the attachment of bubbles, which retained their spherical shape.

Abstract Liquid repellent layers can be fabricated by coating a fractal-like layer of candle soot particles with a silicon oxide layer, combusting the soot at 600 °C and subsequently silanizing with perfluoroalkylsilanes. Drops of different liquids deposited on these so called “superamphiphobic” layers easily roll off thanks to the low liquid-solid adhesion. The lower value of the surface tension of liquids that can be repelled depends on details of the processing. Here, we analyze the influence of the soot deposition duration and height with respect to the flame on the structure and wetting properties of the superamphiphobic layer. The mean diameter of the soot particles depends on the distance from the wick. Close to the wick, the average diameter of the particles varies between 30 and 50 nm as demonstrated by scanning electron microscopy (SEM). Close to the top of the flame, the particles size decreases to 10–20 nm. By measuring the mass of superamphiphobic layers and their thickness by laser scanning confocal microscopy (LSCM) in reflection mode, we could determine that the average porosity is 0.91. The height-dependent structural differences affect the apparent contact and roll-off angles. Lowest contact angles are measured when soot is deposited close to the wick due to wax that is not completely burnt, smearing out the required overhanging structures. The small particle size close to the top of the flame also reduces contact angles, again due to decreasing size of overhangs. Sooting in the middle of the flame led to optimal liquid repellency. Furthermore, for sooting times longer than 45 s the properties of the layer did not change with sooting time, verifying the self-similarity of the layer.

Polymeric and composite microspheres can be synthesized without solvents or process liquids by using superamphiphobic surfaces. In this method, the repellency of superamphiphobic layers to monomers and polymer melts and the extremely low adhesion to particles are taken advantage of.

In a gas membrane, gas is transferred between a liquid and a gas through a microporous membrane. The main challenge is to achieve a high gas transfer while preventing wetting and clogging. With respect to the oxygenation of blood, haemocompatibility is also required. Here we coat macroporous meshes with a superamphiphobic-or liquid repellent-layer to meet this challenge. The superamphiphobic layer consists of a fractal-like network of fluorinated silicon oxide nanospheres; gas trapped between the nanospheres keeps the liquid from contacting the wall of the membrane. We demonstrate the capabilities of the membrane by capturing carbon dioxide gas into a basic aqueous solution and in addition use it to oxygenate blood. Usually, blood tends to clog membranes because of the abundance of blood cells, platelets, proteins and lipids. We show that human blood stored in a superamphiphobic well for 24 h can be poured off without leaving cells or adsorbed protein behind.