We report a detailed experimental and theoretical study on thermoelectric properties of boron-doped single-walled carbon nanotubes (B-SWCNTs), which are versatile building blocks of flexible thermoelectric devices. Implantations of substitutional boron dopants (0.1-0.5 atom %) in SWCNTs are realized using thermal diffusion. The after-synthesis boron doping simultaneously improves the Seebeck coefficient (S) and electrical conductivity (sigma) of SWCNT networks, leading to an S-2 sigma value of 226 mu W/mK(2). First-principle calculations indicate that a few tenths atom % of substitutional boron atoms improve the S value of semi-conducting SWCNTs but reduce the electron conductance in individual SWCNTs. The high s of B-SWCNT networks is attributed to the improved electrical transport between laterally contacted metallic and semi-conducting nanotubes. The produced B-SWCNTs are stable over high-temperature annealing or processing in liquid media, which inspired us to fabricate thermoelectric modules by a low-cost printing method. The modules demonstrate an increased thermoelectric efficiency by 76% compared to those with undoped SWCNTs. This work provides a feasible fabrication strategy and physical insights for B-SWCNT-based flexible thermoelectrics.

On-surface synthesis provides a powerful method for the generation of long acene molecules, making possible the detailed investigation of the electronic properties of single higher acenes on a surface. By means of scanning tunneling microscopy and spectroscopy combined with theoretical considerations, we discuss the polyradical character of the ground state of higher acenes as a function of the number of linearly fused benzene rings. We present energy and spatial mapping of the tunneling resonances of hexacene, heptacene, and decacene, and discuss the role of molecular orbitals in the observed tunneling conductance maps. We show that the energy gap between the first electronic tunneling resonances below and above the Fermi energy stabilizes to a finite value, determined by a first diradical electronic perturbative contribution to the polyacene electronic ground state. Up to decacene, the main contributor to the ground state of acenes remains the lowest-energy closed-shell electronic configuration.

The calculation of time-dependent charge and energy currents in nanoscale systems is a challenging task. Nevertheless it is crucial for gaining a deep understanding of the relevant processes at the nanoscale. We extend the auxiliary-mode approach for time-dependent charge transport to allow for the calculation of energy currents for arbitrary time-dependencies. We apply the approach to two illustrative examples, a single-level system and a benzene ring, demonstrating its usefulness for a wide-range of problems beyond simple toy models, such as molecular devices.

Epoxyacenes adsorbed on metal surfaces form acenes during thermally induced reduction in ultrahigh vacuum conditions. The incorporation of oxygen bridges into a hydrocarbon backbone leads to an enhanced stability of these molecular precursors under ambient condition; however, it has also a distinct influence on their adsorption and self assembly on metal surfaces. Here, a low-temperature scanning tunneling microscopy (LT-STM) study of two different epoxyacenes on the Au(111) surface at submonolayer coverage is presented. Both molecules show self-assembly based on hydrogen bonding. While for the molecules with a single epoxy moiety nanostructures of three molecules are formed, extended molecular networks are achieved with two epoxy moieties and a slightly higher surface coverage. Upon annealing at 390 K, the molecules are reduced to the respective acene; however, both systems keep a similar assembled structure. The experimental STM images supported by theoretical calculations show that the self-assembly of the on-surface fabricated acenes is greatly influenced by the on-surface reaction and strongly differs from the adsorption pattern of directly deposited acenes, highlighting the importance of the cleaved oxygen in the self-assembly.

We investigated the thermally induced on-surface cyclization of 4,10-bis(2'-bromo-4'-methylphenyl)-1,3-dimethylpyrene to form the previously unknown, non-alternant polyaromatic hydrocarbon diindeno[1,2,3-cd:1´,2´,3´-mn]pyrene on Au(111) using scanning tunneling microscopy and spectroscopy. The observed unimolecular reaction involves thermally induced debromination followed by selective ring-closure to fuse the neighboring benzene moieties via a five-membered ring. The structure of the product has been verified experimentally as well as theoretically. Our results demonstrate that on-surface reactions give rise to unusual chemical reactivities and selectivities and provide access to new molecules.

We present the on-surface reduction of diepoxytetracenes to form genuine tetracene on Cu(111). The conversion is achieved by scanning tunneling microscopy (STM) tip-induced manipulation as well as thermal activation and is conclusively demonstrated by means of atomic force microscopy (AFM) with atomic resolution. We observe that the metallic surface plays an important role in the deoxygenation and for the planarization after bond cleavage.

Surface-assisted reduction of specially designed air-stable precursors allows us to study single hexacene molecules on Au(111) by scanning tunneling microscopy and spectroscopy, mapping with intramolecular resolution their extended electronic eigenstates.

We present the on-surface reduction of diepoxytetracenes to form genuine tetracene on Cu(111). The conversion is achieved by scanning tunneling microscopy (STM) tip-induced manipulation as well as thermal activation and is conclusively demonstrated by means of atomic force microscopy (AFM) with atomic resolution. We observe that the metallic surface plays an important role in the deoxygenation and for the planarization after bond cleavage.

We demonstrate that a single 4-acetylbiphenyl molecule adsorbed along the dimer row of a Si(100)-(2 X 1) surface can be reversibly switched between two stable conformations using the tunneling current of a scanning tunneling microscope. The experiment supported by density functional theory calculations demonstrates that the molecule by switching selectively passivates and depassivates a dangling-bond pair on the silicon surface, opening new routes for the logical input in dangling-bond-based atomic-scale circuits.

We present a general atomistic ab initio‐based modeling approach and numerical implementation for the calculation of thermoelectric properties of carbon nanomaterials. The approach is based on density functional theory calculations of electronic and vibrational properties in combination with quantum transport theory in the Green function formalism. It allows to calculate charge and heat transport, and therefore electrical conductance, thermopower (Seebeck coefficient), electron thermal conductance, phonon thermal conductance, and thermoelectric efficiency, i.e., figure of merit. We systematically investigated temperature, doping, and disorder dependence of the thermoelectric properties of the fundamental types of nanocarbons, such as graphene, metallic and semiconducting nanoribbons, as well as metallic and semiconducting nanotubes.

Grain boundaries are commonly observed in carbon nanostructures, but their influence on thermal and electric properties are still not completely understood. Using a combined approach of density functional tight-binding theory and non-equilibrium Green functions we investigate electron and phonon transport in carbon based systems. In this work, quantum transport and thermoelectric properties are summarized for graphene sheets, graphene nanoribbons and carbon nanotubes with a variety of grain boundary types in a wide temperature range. Motivated by previous findings that disorder scatters phonons more effectively than electrons, a significant improvement in the thermoelectric performance for polycrystalline systems is expected. As the effect is marginally sensitive to the grain boundary type, we demonstrate that grain boundaries are a viable tool to greatly enhance the figure of merit, paving the way for the design of new thermoelectric materials.

Charge and thermal conductivities are the most important parameters of carbon nanomaterials as candidates for future electronics. In this paper we address the effects of Anderson type disorder in long semiconductor carbon nanotubes (CNTs) to electron charge conductivity and lattice thermal conductivity using the atomistic Green function approach. The electron and phonon transmissions are analyzed as a function of the length of the disordered nanostructures. The thermal conductance as a function of temperature is calculated for different lengths. Analysis of the transmission probabilities as a function of length of the disordered device shows that both electrons and phonons with different energies display different transport regimes, i.e. quasi-ballistic, diffusive and localization regimes coexist. In the light of the results we discuss heating of the semiconductor device in electronic applications.

We investigate the combined influence of structural defects and uniaxial longitudinal strain on the electronic transport properties of armchair graphene nanoribbons using the numerical approach based on the semiempirical tight-binding model, the Landauer formalism, and the recursion method for Green functions. We calculate the conductance of graphene nanoribbons in the quantum coherent regime with different types and concentrations of defects. Further, we apply uniform planar tension to the nonideal graphene ribbons with randomly distributed and oriented single and double vacancies and Stone-Wales defects. Since transport characteristics of graphene nanoribbons are found to be very sensitive to edge termination and aspect ratio, and it has been shown that energy gaps can emerge under critical strain; the interplay of both effects needs to be studied. We show that band gap engineering using strain is still possible for nonideal armchair ribbons with a small defect concentration, as the oscillatory behavior of the gap is preserved.