Harmful algal blooms present severe environmental threats, impacting water quality, aquatic ecosystems, and human health. The frequency and intensity of these blooms are rising, largely driven by global warming and changing climatic conditions. There is an urgent need for innovative methods to monitor blue-green algae, also known as cyanobacteria, to enable the implementation of preventative measures. Here, we show that native mass spectrometry is an effective tool for detecting cyanobacteria directly from lake samples, both prior and during bloom formation. Our approach allows for the rapid characterization of cyanobacterial populations within lakes, offering valuable insights into the dynamics of cyanobacterial species associated with harmful algae blooms. Overall, we highlight the exceptional capability of native mass spectrometry in directly detecting and monitoring cyanobacterial blooms, which will support the development of more effective strategies to mitigate this growing environmental challenge.

An integrated scalable platform for fermentative production and downstream processing of bacterial magnetosome products is advanced. Long magnetosome chains, high cellular magnetism, and low numbers of polyhydroxyalkanoate granules were obtained during the exponential growth phase of a two-stage continuous high cell density fermentation of M. gryphiswaldense MSR-1. Centrifugally concentrated 20% (w/v) suspensions of exponential phase cells were disrupted with high efficiency (similar to 92%) in a single pass through a Constant Systems Cell Disruptor operated at 10 kpsi, releasing -75% of the cellular iron. Magnetosomes were recovered in partially purified form from crude whole cell disruptates by rotor-stator high-gradient magnetic separation. Further purification/polishing was achieved by magnetically enhanced density separation in an aqueous micellar two-phase system (a new technique developed in this work as a low-cost alternative to sucrose gradient ultracentrifugation). The unoptimised 4-step process delivered highly purified magnetosomes (ca. 50 and 80-fold with respect to polyhydroxyalkanoate and protein) in > 50% yield, with no evidence of crystal coat damage, acceptable reduction (-35%) in median magnetosome chain length, and magnetic properties (pot-bellied hysteresis loop, coercivity = 9.8 mT, 'squareness' = 0.32) expected of isolated magnetosome chains. Though demonstrated in batch mode, the platform displays potential for end-to-end continuous manufacture of future magnetosome-based products.

Mechanical forces shape living matter from the macro- to the microscale as both eukaryotic and prokaryotic cells are force wielders and sensors. However, whereas such forces have been used to control mechanically dependent behaviors in mammalian cells, we lack the same level of understanding in bacteria. Surface adhesion, the initial stages of biofilm formation and surface biofouling, is a mechanically dependent process, which makes it an ideal target for mechano-control. In this study, we employed nanometer surface vibrations to mechanically stimulate bacteria and investigate their effect on adhesion. We discovered that vibrational stimulation at the nanoscale consistently reduces surface adhesion by altering cell membrane potential. Our findings identify a link between bacteria electrophysiology and surface adhesion and provide evidence that the nanometric mechanical "tickling" of bacteria can inhibit surface adhesion.

Systematic development of a temperature-controlled isocratic process for one-column low-salt hydrophobic interaction chromatography (HIC) of proteins employing a travelling cooling zone reactor (TCZR) system, is described. Batch binding and confocal scanning microscopy were employed to define process conditions for temperature-reversible binding of bovine serum albumin (BSA) which were validated in pulse-response temperature switching HIC experiments, before transferring to TCZR-HIC. A thin-walled stainless-steel column mounted with a movable assembly of copper blocks and Peltier elements (travelling cooling zone, TCZ) was used for TCZR-HIC. In pulse-response TCZR-HIC, 12 TCZ movements along the column desorbed 86.3% of the applied BSA monomers in 95.3% purity depleted >6-fold in 2-4 mers and nearly 260-fold in higher molecular weight (HMW) species. For continuous TCZR-HIC, the TCZ was moved 49-58 times during uninterrupted loading of BSA feeds at 0.25, 0.5 or 1 mgmL(-1). Each TCZ movement generated a sharp symmetrical elution peak. In the best case, (condition 1: 0.25 mgmL(-1) BSA; >17 mg BSA applied per mL of bed) the height of TCZ elution peaks approached pseudo-steady midway through the loading phase with no rise in baseline UV280 signal between peaks. Peak composition remained constant averaging 94.4% monomer, 5.6% 2-4 mers and <0.05% HMW. Monomers were recovered in quantitative yield depleted >3.1 fold in 2-4 mers and 92-fold in HMW species cf. the feed (63.6% monomers, 21.8% 2-4 mers, 14.6% HMW). However, increasing the BSA concentration to 1 mgmL(-1) (condition 2) or employing a fouled HIC column with 0.5 mgmL(-1) BSA (condition 3) compromised monomer purification performance.

ABSTRACT Efflux pumps are well known to be an important mechanism for removing noxious substances such as antibiotics from bacteria. Given that many antibiotics function by accumulating inside bacteria, efflux pumps contribute to resistance. Efflux pump inactivation is a potential strategy to combat antimicrobial resistance, as bacteria would not be able to pump out antibiotics. We recently discovered that the impact of loss of efflux function is only apparent in actively growing cells. We demonstrated that the global transcriptome of Salmonella Typhimurium is drastically altered during slower growth leading to stationary-phase cells having a remodeled, less permeable envelope that prevents antibiotics entering the cell. Here, we investigated the effects of deleting the major efflux pump of Salmonella Typhimurium, AcrB, on global gene transcription across growth. We revealed that an acrB knockout entered stationary phase later than the wild-type strain SL1344 and displayed increased and prolonged expression of genes responsible for anaerobic energy metabolism. We devised a model linking efflux and membrane potential, whereby deactivation of AcrB prevents influx of protons across the inner membrane and thereby hyperpolarization. Knockout or deactivation of AcrB was demonstrated to increase membrane potential. We propose that the global transcription regulator ArcBA senses changes to the redox state of the quinol pool (linked to the membrane potential of the bacterium) and coordinates the shift from exponential to stationary phase via the key master regulators RpoS, Rsd, and Rmf. Inactivation of efflux pumps therefore influences the fundamental physiology of Salmonella , with likely impacts on multiple phenotypes. IMPORTANCE We demonstrate for the first time that deactivation of efflux pumps brings about changes to gross bacterial physiology and metabolism. Rather than simply being a response to noxious substances, efflux pumps appear to play a key role in maintenance of membrane potential and thereby energy metabolism. This discovery suggests that efflux pump inhibition or inactivation might have unforeseen positive consequences on antibiotic activity. Given that stationary-phase bacteria are more resistant to antibiotic uptake, late entry into stationary phase would prolong antibiotic accumulation by bacteria. Furthermore, membrane hyperpolarization could result in increased generation of reactive species proposed to be important for the activity of some antibiotics. Finally, changes in gross physiology could also explain the decreased virulence of efflux mutants.

Escherichia coli is commonly used industrially to manufacture recombinant proteins for biopharmaceutical applications, as well as in academic and industrial settings for R&D purposes. Optimisation of recombinant protein production remains problematic as many proteins are difficult to make, and process conditions must be optimised for each individual protein. An approach to accelerate process development is the use of a green fluorescent protein (GFP) fusions, which can be used to rapidly and simply measure the quantity and folding state of the protein of interest. In this study, we used GFP fusions to optimise production of recombinant human protein tumour necrosis factor (rhTNFα) using a T7 expression system. Flow cytometry was used to measure fluorescence and cell viability on a single cell level to determine culture heterogeneity. Fluorescence measurements were found to be comparable to data generated by subcellular fractionation and SDS-PAGE, a far more time-intensive technique. We compared production of rhTNFα-GFP with that of GFP alone to determine the impact of rhTNFα on expression levels. Optimised shakeflask conditions were then transferred to fed-batch high cell density bioreactor cultures. Finally, the expression of GFP from a p araBAD expression vector was compared to the T7 system. We highlight the utility of GFP fusions and flow cytometry for rapid process development.

Although plasma treatment can alter polymer surface wettability and adhesiveness, scant attention has been given to plasma effects across scales and their anti-fouling performance. Herein, the discovery that plasma-activated polydimethylsiloxane (PDMS) nanopillar arrays remarkably enhance anti-fouling behavior, yielding a 98.7% reduction in Escherichia coli adhesion compared to native planar surfaces. The plasma-activated nanopillar arrays can hold to their anti-fouling properties for extended periods of storage, still exhibiting more than 65.1% less bacterial colonization than their native planar counterparts after 50 days. The anti-fouling behavior promoted by plasma activation is significantly enhanced as the structure features reduce in size from macroscale to microscale to nanoscale, revealing an altered plasma activation effect upon confinement at the nanoscale level. It is anticipated that the findings will improve the ability to achieve non-fouling effects in polymeric materials for a broad range of applications in clinical and industrial settings.

As the production of graphene-based nanomaterials such as GO is increasing, it is expected that a large amount of GO waste will be generated. The environment (i.e., soil and aquatic systems) will be amongst the final repositories of these wastes which means important natural microbial communities in such environments will be at risk of GO exposure. However, little is known about how these communities respond to environmental stresses in synergy with the presence of GO. In this study, the effect of three different stress conditions: temperature (5, 25 and 40 °C); pH (5 to 9) and osmotic stress (51, 219 and 320 mM NaCl) in addition to GO treatment was investigated on the viability and physiology of biofilms and planktonic cells of soil bacterium P. putida. It was found that planktonic cells were more resistant to GO alone compared to biofilms. However, the cells were sensitive to GO when exposed to pH or osmotic stresses. Temperature was not found to influence the survival of biofilm with or without exposure to GO. However, low pH caused a reduction in colony-forming units (CFU) at pHs 5 and 6 for the pre-treated samples, while biofilms at pH 7–9 did not show any decrease. Interestingly, the post-treatment of planktonic cells or biofilms with GO showed a significant reduction in CFU at all pH ranges. The effect of higher osmotic stress in combination with GO resulted in a significant reduction in biofilms. These results show that the effect of stresses naturally occurring in the environment can be affected and changed when in combination with GO and can potentially affect the balance of natural biofilms.

The Gram-negative periplasm is a convenient location for the accumulation of many recombinant proteins including biopharmaceutical products. It is the site of disulphide bond formation, required by some proteins (such as antibody fragments) for correct folding and function. It also permits simpler protein release and downstream processing than cytoplasmic accumulation. As such, targeting of recombinant proteins to the E. coli periplasm is a key strategy in biologic manufacture. However, expression and translocation of each recombinant protein requires optimisation including selection of the best signal peptide and growth and production conditions. Traditional methods require separation and analysis of protein compositions of periplasmic and cytoplasmic fractions, a time- and labour-intensive method that is difficult to parallelise. Therefore, approaches for high throughput quantification of periplasmic protein accumulation offer advantages in rapid process development.

Antimicrobial resistance is an ever-growing health concern worldwide that has created renewed interest in the use of traditional anti-microbial treatments, including honey. However, understanding the underlying mechanism of the anti-microbial action of honey has been hampered due to the complexity of its composition. High throughput genetic tools could assist in understanding this mechanism. In this study, the anti-bacterial mechanism of a model honey, made of sugars, hydrogen peroxide, and gluconic acid, was investigated using genome-wide transposon mutagenesis combined with high-throughput sequencing (TraDIS), with the strain Escherichia coli K-12 MG1655 as the target organism. We identified a number of genes which when mutated caused a severe loss of fitness when cells were exposed to the model honey. These genes encode membrane proteins including those involved in uptake of essential molecules, and components of the electron transport chain. They are enriched for pathways involved in intracellular homeostasis and redox activity. Genes involved in assembly and activity of formate dehydrogenase O (FDH-O) were of particular note. The phenotypes of mutants in a subset of the genes identified were confirmed by phenotypic screening of deletion strains. We also found some genes which when mutated led to enhanced resistance to treatment with the model honey. This study identifies potential synergies between the main honey stressors and provides insights into the global antibacterial mechanism of this natural product.

Most Escherichia coli overexpression vectors used for recombinant protein production (RPP) depend on organic inducers, for example, sugars or simple conjugates. However, these can be expensive and, sometimes, chemically unstable. To simplify this and to cut the cost of RPP, we have developed vectors controlled by the Escherichia coli nitrate‐responsive NarL transcription activator protein, which use nitrate, a cheap, stable, and abundant inorganic ion, to induce high‐level controlled RPP. We show that target proteins, such as green fluorescent protein, human growth hormone, and single‐chain variable region antibody fragments can be expressed to high levels using our promoter systems. As nitrate levels are high in many commercial fertilizers, we demonstrate that controlled RPP can be achieved using readily available and inexpensive garden products.

The intrinsic resilience of biofilms to environmental conditions makes them an attractive plat-form for biocatalysis, bioremediation, agriculture or consumer health. However, one of the main challenges in these areas is that beneficial bacteria are not necessarily good at biofilm formation. Currently, this problem is solved by genetic engineering or experimental evolution, techniques that can be costly and time consuming, require expertise in molecular biology and/or microbiolo-gy and, more importantly, are not suitable for all types of microorganisms or applications. Here we show that synthetic polymers can be used as an alternative, working as simple additives to nucleate the formation of biofilms. Using MC4100, a strain of Escherichia coli that forms bio-films poorly, we demonstrate that hydrophobic polymers induce clustering and promote biofilm formation in this bacterium, with increasingly hydrophobic polymers outperforming less hydro-phobic polymers. Moreover, we compare the effect of the polymers on MC4100 against PHL644, an E. coli strain that forms biofilms well due to a single point mutation which increases expres-sion of the adhesin curli. In the presence of selected polymers MC4100 can reach levels of bio-mass production and curli expression similar or higher than PHL644, demonstrating that syn-thetic polymers promote similar changes in microbial physiology than those introduced following genetic modification. Finally, we demonstrate that these polymers can be used to improve the performance of MC4100 biofilms in the biocatalytic transformation of 5-fluoroindole into 5-fluorotryptophan. Our results show that incubation with these synthetic polymers helps MC4100 match and even outperform PHL644 in this biotransformation, demonstrating that synthetic polymers can underpin the development of beneficial applications of biofilms.

To successfully design expression systems for industrial biotechnology and biopharmaceutical applications; plasmid stability, efficient synthesis of the desired product and the use of selection markers acceptable to regulatory bodies are of utmost importance. In this work we demonstrate the application of a set of IPTG-inducible protein expression systems -- harboring different features namely, antibiotic vs auxotrophy marker; two-plasmids vs single plasmid expression system; expression levels of the repressor protein (LacI) and the auxotrophic marker (glyA) -- in high-cell density cultures to evaluate their suitability in bioprocess conditions that resemble industrial settings. Results revealed that the first generation of engineered strain showed a 50% reduction in the production of the model recombinant protein fuculose-1-phosphate aldolase (FucA) compared to the reference system from QIAGEN. The over-transcription of glyA was found to be a major factor responsible for the metabolic burden. The second- and third-generation of expression systems presented an increase in FucA production and advantageous features. In particular, the third-generation expression system is antibiotic-free, autotrophy-selection based and single-plasmid and, is capable to produce FucA at similar levels compared to the original commercial expression system. These new tools open new avenues for high-yield and robust expression of recombinant proteins in E. coli.

We have developed a novel urea-inducible recombinant protein production system by exploiting the Proteus mirabilis urease ureR-ureD promoter region and the ureR AraC-family transcriptional regulator. Experiments using the expression of β-galactosidase and green fluorescent protein (GFP) showed that promoter activity is tightly regulated and that varying the concentration of urea can give up to 100-fold induction. Production of proteins of biopharmaceutical interest has been demonstrated, including human growth hormone (hGH), a single chain antibody fragment (scFv) against interleukin-1β and a potential Neisserial vaccine candidate (BamAENm). Expression levels can be fine-tuned by temperature and different urea concentrations, and can be induced with readily available garden fertilisers and even urine. As urea is an inexpensive, stable inducer, a urea-induced expression system has the potential to considerably reduce the costs of large-scale recombinant protein production.

Many commonly used bacterial promoters employed for recombinant protein production (RPP) in Escherichia coli are capable of high-level protein expression. However, such promoter systems are often too strong, being ill suited for expressing proteins that are difficult to fold, targeted to the membrane or secreted out of the cytoplasm. To circumvent this problem, a suite of bacterial promoters has been constructed with a range of different promoter strengths, assigning them specific "promoter activity ratings" (PARs). Selecting three of these PAR promoters, with low, intermediate and high strengths, it is demonstrated that the expression of target proteins, such as green fluorescent protein (GFP), human growth hormone (hGH) and single chain variable region antibody fragments (scFvs), can be set to three levels when expressed in E. coli. It is shown that the PAR promoter system is extremely flexible, operating in a variety of E. coli strains and under various different culture regimes. Furthermore, due to its tight regulation, it is shown that this system can also express a toxic outer membrane protein, at levels which do not affect bacterial growth. Thus, the PAR promoter system can be used to tailor the expression levels of target proteins in E. coli and maximize RPP.

For antibiotics with intracellular targets, effective treatment of bacterial infections requires the drug to accumulate to a high concentration inside cells. Bacteria produce a complex cell envelope and possess drug-export efflux pumps to limit drug accumulation inside cells. Decreasing cell envelope permeability and increasing efflux pump activity can reduce intracellular accumulation of antibiotics, and are commonly seen in antibiotic resistant strains. Here, we show that the balance between influx and efflux differs depending on bacterial growth phase in Gramnegative bacteria. Accumulation of the model fluorescent drug, ethidium bromide (EtBr) was measured in S . Typhimurium SL1344 (wild-type) and efflux deficient (Δ acrB ) strains during growth. In SL1344, EtBr accumulation remained low, regardless of growth phase and did not correlate with acrAB transcription. EtBr accumulation in Δ acrB was high in exponential phase but dropped sharply later in growth, with no significant difference to SL1344 in stationary phase. Low EtBr accumulation in stationary phase was not due to the upregulation of other efflux pumps, but instead, due to decreased permeability of the envelope in stationary phase. RNAseq identified changes in expression of several pathways that remodel the envelope in stationary phase, leading to lower permeability. This study shows that efflux is only important for maintaining low drug accumulation in actively growing cells, and that envelope permeability is the predominant factor dictating the rate of drug entry in stationary phase cells. This conclusion means that (i) antibiotics with intracellular targets may be less effective in complex non-growing or slow-growing bacterial infections where intracellular accumulation may be low, (ii) efflux inhibitors may be successful in potentiating the activity of existing antibiotics, but potentially only for bacterial infections where cells are actively growing and (iii) the remodelling of the cell envelope prior to stationary phase could provide novel drug targets.

The search for a cheap and readily available feedstock for biodiesel production has driven researchers to investigate the potential use of activated sludge-derived lipid. Due to the low lipid yield of activated sludge, the utility of subcritical water (SCW) is being considered as a means of increasing the extractable lipids. In this work, operating parameters (temperature, time and biomass loading) identified in our previous work to influence lipid yield from activated sludge under SCW treatment were optimized, using face-centered central composite design (FCCCD). The results show that the maximum lipid yield obtained from the liquid and solid products, post SCW treatment, at the optimum conditions of temperature 80 degrees C, extraction time 20 min and biomass loading 1%, was 41.0 (wt./wt.)%. This gives approximately 454 (wt./wt.)% increase from 7.4 (wt./wt.)% obtained by solvent extraction without SCW treatment. The results suggest that activated sludge is a potential feedstock for biodiesel production.

Initial work to generate physically robust biofilms for biocatalytic applications revealed that Escherichia coli K-12 can form a floating biofilm at the air-liquid interface, commonly referred to as a pellicle. Unlike other species where pellicle formation is well-characterised, such as Bacillus subtilis, there are few reports of E. coli K-12 pellicles in the literature. In order to study pellicle formation, a growth model was developed and pellicle formation was monitored over time. Mechanical forces, both motility and shaking, were shown to have effects on pellicle formation and development. The role and regulation of curli, an amyloid protein adhesin critical in E. coli K-12 biofilm formation, was studied by using promoter-green fluorescent protein reporters; flow cytometry and confocal laser scanning microscopy were used to monitor curli expression over time and in different locations. Curli were found to be not only crucial for pellicle formation, but also heterogeneously expressed within the pellicle. The components of the extracellular polymeric substances (EPS) in pellicles were analysed by confocal microscopy using lectins, revealing distinct pellicle morphology on the air-facing and medium-facing sides, and spatially- and temporally-regulated generation of the EPS components poly-N-acetyl glucosamine and colanic acid. We discuss the difference between pellicles formed by E. coli K-12, pathogenic E. coli strains and other species, and the relationship between E. coli K-12 pellicles and solid surface-attached biofilms. (C) 2020, The Society for Biotechnology, Japan. All rights reserved.

This study shows that efflux is important for maintaining low intracellular accumulation only in actively growing cells and that envelope permeability is the predominant factor in stationary-phase cells. This conclusion means that (i) antibiotics with intracellular targets may be less effective in complex infections with nongrowing or slow-growing bacteria, where intracellular accumulation may be low; (ii) efflux inhibitors may be successful in potentiating the activity of existing antibiotics, but potentially only for bacterial infections where cells are actively growing; and (iii) the remodeling of the cell envelope prior to stationary phase could provide novel drug targets.