Photonic processors use optical signals for computation, leveraging the high bandwidth and low loss of optical links. While many approaches have been proposed, including in-memory photonic circuits, most efforts have focused on the physical design of photonic components rather than full architectural integration with electronic peripheral circuitry. In this study, we present a microarchitecture-level study that estimates the compute efficiency and density of three prominent photonic computing architectures. Our evaluation accounts for both the photonic circuits and the essential peripheral electronics required for opto-electronic and analog–digital conversions. We further demonstrate a heterogeneous photonic–electronic in-memory processing approach for low-latency neural network inference. These results provide a better understanding of the design aspects of photonic computing.

Modern computing relies on separate components for data capture and processing. However, this often leads to computational latency and congestion in data processing infrastructures. Using device level demonstrations, in this work, we propose a phase-change computational sensor that utilizes reconfigurable load lines to perform in-sensor-in-memory computations. This is achieved through a combination of the crossbar topology of the sensor array and the non-volatile reconfigurability of conductance states in phase-change memory devices. We show that certain pre-processing computations, such as convolutional operations, can be offloaded from the in-memory processor to the sensor to create intelligent edge sensors.

The need to repeatedly shuttle around synaptic weight values from memory to processing units has been a key source of energy inefficiency associated with hardware implementation of artificial neural networks. Analog in-memory computing (AIMC) with spatially instantiated synaptic weights holds high promise to overcome this challenge, by performing matrix-vector multiplications (MVMs) directly within the network weights stored on a chip to execute an inference workload. However, to achieve end-to-end improvements in latency and energy consumption, AIMC must be combined with on-chip digital operations and communication to move towards configurations in which a full inference workload is realized entirely on-chip. Moreover, it is highly desirable to achieve high MVM and inference accuracy without application-wise re-tuning of the chip. Here, we present a multi-core AIMC chip designed and fabricated in 14-nm complementary metal-oxide-semiconductor (CMOS) technology with backend-integrated phase-change memory (PCM). The fully-integrated chip features 64 256x256 AIMC cores interconnected via an on-chip communication network. It also implements the digital activation functions and processing involved in ResNet convolutional neural networks and long short-term memory (LSTM) networks. We demonstrate near software-equivalent inference accuracy with ResNet and LSTM networks while implementing all the computations associated with the weight layers and the activation functions on-chip. The chip can achieve a maximal throughput of 63.1 TOPS at an energy efficiency of 9.76 TOPS/W for 8-bit input/output matrix-vector multiplications.

Continually learning new classes from few training examples without forgetting previous old classes demands a flexible architecture with an inevitably growing portion of storage, in which new examples and classes can be incrementally stored and efficiently retrieved. One viable architectural solution is to tightly couple a stationary deep neural network to a dynamically evolving explicit memory (EM). As the centerpiece of this architecture, we propose an EM unit that leverages energy-efficient in-memory compute (IMC) cores during the course of continual learning operations. We demonstrate for the first time how the EM unit can physically superpose multiple training examples, expand to accommodate unseen classes, and perform similarity search during inference, using operations on an IMC core based on phase-change memory (PCM). Specifically, the physical superposition of few encoded training examples is realized via in-situ progressive crystallization of PCM devices. The classification accuracy achieved on the IMC core remains within a range of 1.28%-2.5% compared to that of the state-of-the-art full-precision baseline software model on both the CIFAR-100 and miniImageNet datasets when continually learning 40 novel classes (from only five examples per class) on top of 60 old classes.

We present a 256 $\times$ 256 in-memory compute (IMC) core designed and fabricated in 14-nm CMOS technology with backend-integrated multi-level phase change memory (PCM). It comprises 256 linearized current-controlled oscillator (CCO)-based A/D converters (ADCs) at a compact 4- $\mu \text{m}$ pitch and a local digital processing unit (LDPU) performing affine scaling and ReLU operations. A frequency-linearization technique for CCO is introduced, which increases the maximum CCO frequency beyond 3 GHz, while ensuring accurate on-chip matrix–vector multiplications (MVMs). Moreover, the design and functionality of the digital ADC calibration procedure is described in detail and the MVM accuracy is quantified. Finally, the measured classification accuracies of deep learning (DL) inference applications on the MNIST and CIFAR-10 datasets, when two IMC cores are employed, are presented. For a performance density of 1.59 TOPS/mm2, a measured energy efficiency of 10.5 TOPS/W, at a main clock frequency of 1 GHz, is achieved.

In-memory computing using memristive devices is a promising non-von Neumann approach for making energy- efficient deep learning inference hardware. Synaptic units comprising one or more memristive devices organized in a crossbar configuration are capable of performing the matrix-vector multiply operations in place by exploiting the Kirchhoff's circuits laws. In this paper, we propose a weight mapping algorithm to efficiently program such a synaptic unit comprising multiple phase change memory (PCM) devices to target conductance values. To evaluate the programming scheme, a simulator based on the measured programming characteristics of 10,000 PCM devices is developed. It is shown that the synaptic unit can be programmed reliably without significant overhead in programming time or energy compared to a unit comprising a single PCM device, while gaining resilience to device-level non-idealities and yield. The algorithm is experimentally verified on a prototype PCM unit cell fabricated in the 90nm CMOS technology node.

We present a 256×256 in-memory compute (IMC) core designed and fabricated in 14nm CMOS with backend-integrated multi-level phase-change memory (PCM). It comprises 256 linearized current controlled oscillator (CCO)-based ADCs at a compact 4µm pitch and a local digital processing unit performing affine scaling and ReLU operations A novel frequency-linearization technique for CCOs is introduced, leading to accurate on-chip matrix-vector-multiply (MVM) when operating over 1 GHz. Measured classification accuracies on MNIST and CIFAR-10 datasets are presented when two cores are employed for deep learning (DL) inference The measured energy efficiency is 10.5 TOPS/W at a performance density of 1.59 TOPS/mm 2 .

Deep neural networks (DNNs) have revolutionized the field of artificial intelligence and have achieved unprecedented success in cognitive tasks such as image and speech recognition. Training of large DNNs, however, is computationally intensive and this has motivated the search for novel computing architectures targeting this application. A computational memory unit with nanoscale resistive memory devices organized in crossbar arrays could store the synaptic weights in their conductance states and perform the expensive weighted summations in place in a non-von Neumann manner. However, updating the conductance states in a reliable manner during the weight update process is a fundamental challenge that limits the training accuracy of such an implementation. Here, we propose a mixed-precision architecture that combines a computational memory unit performing the weighted summations and imprecise conductance updates with a digital processing unit that accumulates the weight updates in high precision. A combined hardware/software training experiment of a multilayer perceptron based on the proposed architecture using a phase-change memory (PCM) array achieves 97.73% test accuracy on the task of classifying handwritten digits (based on the MNIST dataset), within 0.6% of the software baseline. The architecture is further evaluated using accurate behavioral models of PCM on a wide class of networks, namely convolutional neural networks, long-short-term-memory networks, and generative-adversarial networks. Accuracies comparable to those of floating-point implementations are achieved without being constrained by the non-idealities associated with the PCM devices. A system-level study demonstrates 172 × improvement in energy efficiency of the architecture when used for training a multilayer perceptron compared with a dedicated fully digital 32-bit implementation.