The Clean Energy Institute (CEI) is a research institute at the University of Washington. Founded in 2013, the institute maintains several facilities across the university's Seattle campus and supports renewable energy technology research, education, entrepreneurship, and outreach. The institute is under the direction of Daniel T. Schwartz, PhD.
Optimizing the nickel-based heterojunction catalysts during overall water splitting remains a significant challenge. Herein, based on metastable ion etching engineering, a trace amount of Fe-doped Ni/Ni(OH)2 nanotube array coated with carbon (FNNA@C/NF) is successfully synthesized. Specifically, a small amount of Fe3+, generated from the partial oxidation of Fe2+, selectively etches the grain boundaries of the Ni metal substrate, resulting in the formation of a unique nanotube structure. Electrochemical test results demonstrate that it has exceptional hydrogen evolution reaction activity (29.7 mV-10 mA cm-2) and oxygen evolution reaction activity (300.1 mV-100 mA cm-2), along with stable operation for 100 h at a current density of 100 mA cm-2 during overall water splitting. The outstanding performance is primarily attributed to the Fe-doped Ni/Ni(OH)2 heterojunction, obtained through mild pyrolysis, optimizes electron transfer and enhances interfacial reaction kinetics. Meanwhile, the unique nanotube array structure increases the active surface area and improves interfacial mass transfer efficiency. This work offers novel insights and theoretical guidance for designing high-performance nickel-based heterojunction catalysts.
A new method for in-situ Sb doping of CdTe that uses a modified vapor transport deposition system is described. This modification enables control of the Sb concentration with a pyrolysis stage to enhance the doping efficiency. CdTe:Sb films under different deposition conditions are characterized by SEM, XRD, and CV measurements for determining morphology, crystal structure, and hole concentration. Variations of the Sb dopant heater and pyrolyzer temperatures do not affect the CdTe morphology and crystal structure. However, CV measurements show that a higher dopant heater or pyrolyzer temperature leads to higher hole concentration. In this study, CdTe: Sb films achieve a hole concentration of 10 16 cm −3 and 10% doping efficiency when the dopant heater is 600C and the pyrolyzer temperature is 1100C. This demonstrates a path to produce high hole concentration polycrystalline CdTe film with a low concentration of dopant-induced defect.
Developing low-cost, sustainable, and environmentally friendly top absorber layers for tandem solar cells is essential to advancing photovoltaic technologies and accelerating the transition to renewable energy. In this work, we explore the potential of tetravalent (Cu2Zn(GexSi1-x)Se4) cation mutations in chalcogenide compound semiconductors with the aim of finding a material with increased band gap and reduced structural disorder. A combination of high-resolution synchrotron powder diffraction and neutron powder diffraction was used to determine the atomic positions and monoclinic angles in monoclinic wurtz-kesterite type Cu2Zn(GexSi1-x)Se4 mixed crystals as well as to determine the cation distribution in the crystal structure of Ge-rich kesterite-type and Si-rich wurtz-kesterite type mixed crystals. These investigations enabled us to deduce the structural transition scenario within the Cu2Zn(GexSi1-x)Se4 series. The transition occurs via a region where two phases with different crystal structures, tetragonal and monoclinic and thus a different distortion of the coordination tetrahedra, but the same cation distribution within the element specific cation sites co-exist. Thus, the structural transition between the kesterite and the wurtz-kesterite structure within the Cu2Zn(GexSi1-x)Se4 series is a distortion driven transition. The study identifies cation mutation in quaternary chalcogenides as a promising strategy beyond chalcopyrites and kesterites for low cost and environmentally friendly top absorbers in tandem solar cells.
Nanocrystals (NCs) of various compositions have made important contributions to science and technology, with their impact recognized by the 2023 Nobel Prize in Chemistry for the discovery and synthesis of semiconductor quantum dots (QDs). Over four decades of research into NCs has led to numerous advancements in diverse fields, such as optoelectronics, catalysis, energy, medicine, and recently, quantum information and computing. The last 10 years since the predecessor perspective "Prospect of Nanoscience with Nanocrystals" was published in ACS Nano have seen NC research continuously evolve, yielding critical advances in fundamental understanding and practical applications. Mechanistic insights into NC formation have translated into precision control over NC size, shape, and composition. Emerging synthesis techniques have broadened the landscape of compounds obtainable in colloidal NC form. Sophistication in surface chemistry, jointly bolstered by theoretical models and experimental findings, has facilitated refined control over NC properties and represents a trusted gateway to enhanced NC stability and processability. The assembly of NCs into superlattices, along with two-dimensional (2D) photolithography and three-dimensional (3D) printing, has expanded their utility in creating materials with tailored properties. Applications of NCs are also flourishing, consolidating progress in fields targeted early on, such as optoelectronics and catalysis, and extending into areas ranging from quantum technology to phase-change memories. In this perspective, we review the extensive progress in research on NCs over the past decade and highlight key areas where future research may bring further breakthroughs.
High-entropy alloys (HEAs) show great potential for catalyzing complex multi-step reactions, but optimizing their parameters, i.e., composition, but also their crystallinity and morphology, remains a significant challenge. In this study, FeCoNiMoW HEAs are synthesized into either amorphous nanosheets (HEANS) or crystalline nanoparticles (HEANP), which are then used to catalyze the lithium-sulfur (Li-S) reaction of Li-S batteries (LSBs). Evaluations in symmetric cells, coin cells, and pouch cells reveal that HEANS significantly enhance LSB performance, achieving initial discharge capacities up to 1632 mAh g-1. The batteries also exhibit excellent cycling stability over 1000 cycles at 3Cand maintain high-rate performance up to 10C with a capacity of 614 mAh g-1. Comprehensive in situ analyses and density functional theory calculations demonstrate that amorphous HEANS provide more active sites, better ionic conductivity and stronger chemical interactions with lithium polysulfides (LiPS). These properties effectively suppress the shuttle effect, promote the complete S8 -> Li2S conversion by reducing the impedance of the solid-electrolyte interphase, and accelerate the Li2S4 -> Li2S2 step by lowering the nucleation energy barrier. Overall, this study highlights the superior catalytic properties of amorphous 2D HEAs in LSBs and offers new insights into the mechanisms of LiPS conversion.