Background. Dental rehabilitation during anticancer treatment and further follow-up of patients with malignant tumors of the oropharyngeal region presents great difficulties due to the impairment of such basic vital functions as breathing, swallowing, chewing, speech formation, as well as due to the lack of a unified methodological approach to treatment. Despite the emergence of new and improved techniques, the treatment of patients in this group remains challenging due to the delayed diagnosis, complex clinical and anatomical variability of the maxillofacial structures, as well as the extent of defects after surgical treatment and a significant number of associated complications. In this regard, there is a need to improve the efficiency of dental rehabilitation and optimize the existing stages of prosthetic manufacturing to improve the quality of life of the patients, in which replacing the lost tissues with a free revascularized graft is not possible, at different stages of oropharyngeal cancer treatment. Clinical case description. We present a description of clinical and laboratory dental rehabilitation of a patient with an extensive defect in the maxillofacial region after surgical treatment of a malignant tumor. Prosthetic treatment of the patient with postresection defect was proposed using a removable implant-supported maxillary prosthesis with an individual approach to the aesthetic and functional components of prosthesis fabrication. At all stages, the patient’s quality of life was analyzed according to the QLQ-C30 H&N35 international scale. Conclusion. Thus, an individualized aesthetic approach based on the needs and facial traits of the patient with adenocarcinoma allowed to realize a complete dental treatment, which served as a psycho-emotional rehabilitation and made it possible to restore the lost basic functions of the maxillofacial structures, such as swallowing, speech, breathing, eating, as well as facial aesthetics, having a positive impact on the quality of life Введение. Стоматологическая реабилитация в комплексе противоопухолевого лечения и дальнейшего динамического наблюдения пациентов со злокачественными новообразованиями (ЗНО) орофарин- геальной области представляет большие трудности ввиду нарушения таких базовых жизненно-важных функций, как дыхание, глотание, жевание, речеобразование, а также из-за отсутствия единого методологического подхода к лечению. Несмотря на появление новых и усовершенствование уже существующих методик, лечение пациентов данной группы остается сложной задачей ввиду поздней выявляемости заболеваний, сложной клинико-анатомической вариабельности структур челюстно- лицевой области, а также масштаба полученных дефектов после хирургического лечения и значи- тельного числа сопутствующих осложнений. В связи с этим возникает необходимость в повышении эффективности стоматологической реабилитации и оптимизации существующих этапов изготовления протетических конструкций с целью улучшения качества жизни пациентов на этапах лечения ЗНО орофарингеальной области, когда замещение утраченных тканей свободным реваскуляризированным трансплантатом не представляется возможным. Клинический случай. Представлено описание клинических и лабораторных этапов стоматологической реабилитации пациентки с обширным дефектом челюстно-лицевой области после хирургического лечения ЗНО. В плане ортопедического лечения пациентке с пострезекционным дефектом предло- жено изготовление съемного протеза верхней челюсти на имплантатах с индивидуальным подходом к эстетической и функциональной составляющим изготовления протеза. На всех этапах проведен анализ качества жизни пациентки по международной шкале QLQ-C30 H&N35. Заключение. Таким образом, индивидуальный эстетический подход к лечению с учетом потребностей и особенностей лицевых признаков пациентки с аденокарциномой позволил реализовать стомато- логическое лечение в полном объеме, что послужило психоэмоциональной терапией и позволило восполнить утраченные базовые функции челюстно-лицевой области, такие как глотание, речеобра- зование, дыхание, прием пищи и эстетическое благообразие лица, оказывая положительное влияние на качество жизни.
Tubers and cabbage are strategically important crops. However, their volume production is limited by their short shelf-life and vulnerability to spoilage. Drying makes it possible to extend the shelf-life but often damages the quality. As a result, the processing and pre-treatment should be calibrated for optimal parameters. In this research, carrots and white cabbage were treated with an extremely low-frequency electromagnetic field before convective drying to study the effect of various modes on the microbiological profile of the vegetables. The research featured carrots of the Red Core F1 and Borets F1 hybrids and white cabbage of the Olimp F1 and Agressor F1 hybrids. The carrots and cabbage were treated with an extremely low-frequency electromagnetic field (25 Hz, 1 mT, 15 min) and cut into thin bars (0.3–0.5 mm and 0.5–0.7 mm, respectively). After being dried in an Oberhof Fruchttrockner D-47 hot-air dehydrator, the samples were stored in plastic ziplock bags at 25 ± 2°C and a relative air humidity of 75% for 3 months. The QMAFAnM levels were studied in line with Technical Regulation of Customs Union TR CU 021/2011 before storage and after 1 and 3 months. As for the carrot samples, the preliminary treatment with an extremely low-frequency electromagnetic field accelerated the drying process: the dry product yield was 0.4–0.9% lower than in the control samples. The experimental drying process was less intense for cabbage, with the dry product yield being 2.8–3.9% higher than the control. For the carrots, the drying options were 55°C for 7 h and 65°C for 5 h. Both modes provided permissible values of microbial contamination throughout the entire storage period. The preliminary treatment with an extremely low-frequency electromagnetic field reduced the QMAFAnM by 10.7–34.5%. The cabbage samples dried at 65°C for 3 h had permissible values of microbial contamination. However, the experimental pretreatment led to an increase in QMAFAnM by 9.5–12.5% compared to the control. The cabbage samples dried at 55°C for 4 h exceeded the microbial contamination standards for all parameters. The data obtained may help to develop new methods for drying carrots and cabbage using an extremely low-frequency electromagnetic field.
The purpose of research is to study the effect of the composition of enzymes and the pH value of the extractant on the efficiency of extracting pectin from pressed beet pulp. Objectives: to identify the composition of enzymes that provide efficient extraction of pectin, and to determine the optimal pH value of the extractant, providing an increase in the efficiency of extracting pectin from pressed beet pulp. The objects of study are pressed beet pulp, crushed to a particle size of less than 2 mm, treated with microwave EMF at a heating rate of 0.6 °C/s until a temperature of 60 °C is reached, and enzymes – cellulase, xylanase, bacterial protease and fungal protease. An increase in the efficiency of extracting pectin from pressed beet pulp with an extractant with a pH value of 6.5, containing a composition of enzymes, including cellulase and xylanase, by 24.32 % was established compared to the control – an extractant that does not contain enzymes. The inclusion of a protease, regardless of its origin – bacterial or fungal, in the composition of enzymes containing cellulase and xylanase, allows to increase the efficiency of extracting pectin from pressed beet pulp by 33.47 % compared to the control. When the pH value of the extractant is 5.5, the efficiency of pectin extraction increases by 7.91 % compared with the pH value of the extractant 6.5. However, at an extractant pH value of 4.5, the pectin extraction efficiency decreases by 8.74 % compared to an extractant pH value of 6.5. For maximum extraction of pectin from pressed beet pulp, the optimal pH value of the extractant containing the composition of enzymes, including cellulase, xylanase and protease, is pH 5.5. The specified pH value provides an increase in the efficiency of the catalytic ability of cellulase and xylanase, despite the fact that it is the limit value of the operating range for the protease.
The aim of the study is to investigate the features of manifestation of technological and biologically active properties of the food additive – crystalline lycopene. The object of the study was a food additive – crystalline lycopene, produced from a concentrate of carotenoids in oil. Technological properties were studied in experiments on oils containing and not containing lycopene, by the increase in peroxide numbers during their accelerated oxidation for 5 hours at 120 °C and by the induction period during their oxidation in an oxygen stream at 120 °C. Biologically active properties were studied in an experiment (30 days) on laboratory rats. Ten rats were selected – control and experimental. Experimental rats additionally received boluses with 0.40 mg of lycopene. Crystalline lycopene effectively demonstrated technological properties – antioxidant, since the values of the increase in peroxide numbers of refined deodorized sunflower and soybean oils containing 0.005 and 0.010% lycopene compared to the specified oils that do not contain lycopene are reduced by 1.9 and 2.7 times for sunflower and 1.8 and 2.6 times for soybean oil, and the induction period of the specified oils increases by 1.6 and 2.3 times for sunflower and 1.5 and 2.2 times for soybean oil. Crystalline lycopene effectively exhibits hypocholesterolemic, hepatoprotective and antioxidant properties, since at the end of the experiment in the blood of experimental rats, in comparison with the control, the concentration of cholesterol decreased by 17.3 %, the level of activity of liver enzymes ALT and AST by 19.0 and 14.2 %, the concentration of malonic dialdehyde, diene conjugates and ketodienes by 27.9; 25.3 and 22.8 %, respectively. The knowledge gained will allow to reasonably select effective areas of application of the food additive – crystalline lycopene in food systems.
The widespread use of vegetable lecithins in food technologies is primarily due to their technological properties, as well as their high bioactive effect. These properties of lecithins are due to the phospholipids included in their composition. It should be noted that in recent years, the use of modified lecithins with desired composition and properties in food technologies has become increasingly interesting. The aim of the study was a comparative assessment of the particulars of the chemical composition of phospholipids contained in fluid soybean and fluid sunflower lecithins to justify the choice of vegetable lecithin as a feedstock for the production of modified lecithins. It has been established that the phospholipids of fluid soybean lecithin differ from the phospholipids of fluid sunflower lecithin, firstly, by a higher content of the most valuable among the types of phospholipids - phosphatidylcholines - by 7.2