A hierarchical, model-based understanding of the key physical effects underlying stress-induced device performance gain is presented, focusing on the large gains seen for uniaxial PMOS stress conditions and the vertical stress impact on NMOS gain.

Recent attention has been given to metal–oxide–semiconductor field-effect transistor (MOSFET) device designs that utilize stress to achieve performance gain in both n-type MOSFETs (NMOS) and p-type MOSFETs (PMOS). The physics behind NMOS gain is better understood than that of PMOS gain, which has received less attention. In this letter, we describe the warping phenomena which is responsible for the gain seen in [110] uniaxially stressed PMOS devices on [100] orientated wafers. We also demonstrate that shear uniaxial stress in PMOS is better suited to MOSFET applications than biaxial stress as it is able to maintain gain at high vertical and lateral fields.

A leading-edge 90-nm technology with 1.2-nm physical gate oxide, 45-nm gate length, strained silicon, NiSi, seven layers of Cu interconnects, and low-/spl kappa/ CDO for high-performance dense logic is presented. Strained silicon is used to increase saturated n-type and p-type metal-oxide-semiconductor field-effect transistors (MOSFETs) drive currents by 10% and 25%, respectively. Using selective epitaxial Si/sub 1-x/Ge/sub x/ in the source and drain regions, longitudinal uniaxial compressive stress is introduced into the p-type MOSEFT to increase hole mobility by >50%. A tensile silicon nitride-capping layer is used to introduce tensile strain into the n-type MOSFET and enhance electron mobility by 20%. Unlike all past strained-Si work, the hole mobility enhancement in this paper is present at large vertical electric fields in nanoscale transistors making this strain technique useful for advanced logic technologies. Furthermore, using piezoresistance coefficients it is shown that significantly less strain (/spl sim/5 /spl times/) is needed for a given PMOS mobility enhancement when applied via longitudinal uniaxial compression versus in-plane biaxial tension using the conventional Si/sub 1-x/Ge/sub x/ substrate approach.

We describe the device physics of uniaxial strained silicon transistors. Uniaxial strain is more effective, less costly and easier to implement. The highest PMOS drive current to date is reported: 0.72mA/ /spl mu/m. Pattern sensitivity and mobility/Rext partitioning are discussed. Finally we measure inverter delays as low as 4.6pS, and show 50Mb SRAMs operational at 0.65V.

This paper presents an integrated approach to modeling front end stress which has been used to investigate the main sources of stress in advanced logic technologies and how they can be used to improve device performance. The approach is illustrated with the evaluation of several technologically important stress options.

A 65nm generation logic technology with 1.2nm physical gate oxide, 35nm gate length, enhanced channel strain, NiSi, 8 layers of Cu interconnect, and low-k ILD for dense high performance logic is presented. Transistor gate length is scaled down to 35nm while not scaling the gate oxide as a means to improve performance and reduce power. Increased NMOS and PMOS drive currents are achieved by enhanced channel strain and junction engineering. 193nm lithography along with APSM mask technology is used on critical layers to provide aggressive design rules and a 6-T SRAM cell size of 0.57mum(2). Process yield, performance and reliability are demonstrated on a 70 Mbit SRAM test vehicle with >0.5 billion transistors.

A leading edge 90 nm technology with 1.2 nm physical gate oxide, 50 nm gate length, strained silicon, NiSi, 7 layers of Cu interconnects, and low k carbon-doped oxide (CDO) for high performance dense logic is presented. Strained silicon is used to increase saturated NMOS and PMOS drive currents by 10-20% and mobility by >50%. Aggressive design rules and unlanded contacts offer a 1.0 /spl mu/m/sup 2/ 6-T SRAM cell using 193 nm lithography.